| Search |
| [Next Page] |
My new 1 pound TNT
No, I mean in the same pond as in the video. The bottle can be near the shore. Just to see the under ... |
5-12-2019 at 10:35
by: Rocinante |
My new 1 pound TNT
The aluminium burns in hot water vapor.
Smith: Do you have a spare TBX grenade? Could you place a ... |
2-12-2019 at 07:34
by: Rocinante |
My new 1 pound TNT
Wesson: when will be able to see a video of your composition? Like 50 g above ground test ( 1 m abov ... |
1-12-2019 at 05:38
by: Rocinante |
What’s your opinion?
I would like to, in the future. So far I've had succes with only an e-match and 20 l of air with 2.8 ... |
20-11-2019 at 06:15
by: Rocinante |
What’s your opinion?
Leftover acidity due to bad recrystalization or long storage (decomposition) can lead to a reaction ... |
15-11-2019 at 08:44
by: Rocinante |
What’s your opinion?
If you are looking for maximum detonation pressure and velocity, just melt cast ETN. Mixing it with ... |
15-11-2019 at 08:25
by: Rocinante |
presentation about explosives to school
And for the love of god don't spread the myth that Dynamite was (extensively) used by the military.
... |
11-9-2019 at 07:58
by: Rocinante |
Sound of low/medium/high VoD explosives
Do you experience notable difference in the sound of low VoD explosives (flash powder), medium VoD o ... |
16-7-2019 at 07:39
by: Rocinante |
Plasticiser question.
The problems in your tests come from the impactors. Those steel surfaces aren't completely flat and ... |
13-7-2019 at 06:55
by: Rocinante |
Flash Powder and Blasting Cap
The papers I've read place KClO4 flash powders at 80 % of TNT in far field impulse.
AN/Al 75:25 i ... |
10-7-2019 at 07:00
by: Rocinante |
Synthesis of ETN & Fuming Nitric Acid
65 % yields using KNO3? Can you give us the exact ratios/procedure? |
4-7-2019 at 14:37
by: Rocinante |
Synthesis of ETN & Fuming Nitric Acid
There is a guy on BitChute that claims/shows ETN synthesis with 100 g of 96 % SA (some 60 ml), 40 g ... |
3-7-2019 at 09:25
by: Rocinante |
Your favorite blasting cap design
Plastic straws or anything like it that bends easily is completely unacceptable and extremely danger ... |
29-6-2019 at 05:30
by: Rocinante |
Burning ETN PBX
Has anyone tried burning a larger amount of ETN PBX (10 g+) to confirm that a DDT or very fast defla ... |
28-6-2019 at 14:09
by: Rocinante |
Life after detonation
It is important to note that [b]ETN[/b] can undergo powerful deflagration or even detonation unconfi ... |
28-6-2019 at 07:37
by: Rocinante |
Your favorite blasting cap design
The idea of anything removing your fingers is ridiculous. Just compare your rib cage, lungs and your ... |
24-6-2019 at 08:38
by: Rocinante |
Organic peroxides
Interesting. More details like ratio, yield and procedure would be welcome.
TATP can be formed vi ... |
24-6-2019 at 06:27
by: Rocinante |
Nitrated polyols preferences and others you recommend
thermal stability is directly linked to impact sensitivity and moderately to friction sensitivity |
22-5-2019 at 13:36
by: Rocinante |
Nitrated polyols preferences and others you recommend
it is less stable but in much the same way as ETN is less stable than PETN, not a big deal
also, ... |
22-5-2019 at 07:23
by: Rocinante |
Nitrated polyols preferences and others you recommend
https://onlinelibrary.wiley.com/doi/pdf/10.1002/prep.201800337
XPN is twice as sensitive as ETN o ... |
21-5-2019 at 12:05
by: Rocinante |
Your favorite blasting cap design
Metal doesn't bend as easily so it protects the contens of the blasting cap, esp. the primary.
Ho ... |
12-5-2019 at 11:20
by: Rocinante |
Exotic thermites & analogs
they describe that in the patent, the filling has many channels for the gases to escape. The graphit ... |
11-5-2019 at 12:01
by: Rocinante |
Your favorite blasting cap design
Inner tube 15 cm long, inner diamater 7 mm with 0.5 mm thick aluminium walls and a solid, round end ... |
11-5-2019 at 10:57
by: Rocinante |
Exotic thermites & analogs
This patent: https://worldwide.espacenet.com/publicationDetails/originalDocument?CC=US&NR=676674 ... |
8-5-2019 at 11:32
by: Rocinante |
Centrifuge for pressing primary
There is no reason to press any primary explosive, I fail to see how this strange, exotic obsession ... |
4-5-2019 at 15:18
by: Rocinante |
| [Next Page] |
