| Search |
| [Next Page] |
lead azide trouble
I personally like the PVA for it's handling and keeping properties. my sample has held up for a a co ... |
1-11-2020 at 13:50
by: XeonTheMGPony |
Single displacement reaction for lead?
Crosman Lead pellets .22 cal I found to be pretty pure Lead.
I added these to concentrated vinega ... |
30-10-2020 at 05:58
by: XeonTheMGPony |
Detained at customs
eh it is luck of the draw, they will detain a random samples and hope to find some thing. |
27-10-2020 at 03:31
by: XeonTheMGPony |
Is it too much to ask to wear a mask?
[rquote=645221&tid=156164&author=sodium_stearate]Do what Sweden did. In other words, nothin ... |
25-10-2020 at 14:08
by: XeonTheMGPony |
Is it too much to ask to wear a mask?
[rquote=645223&tid=156164&author=njl]Smoking cigarettes and driving don't directly put any o ... |
25-10-2020 at 14:05
by: XeonTheMGPony |
Is it too much to ask to wear a mask?
[rquote=644973&tid=156164&author=stoichiometric_steve][rquote=644969&tid=156164&auth ... |
25-10-2020 at 14:00
by: XeonTheMGPony |
lead azide trouble
coated lead azides seem to be less sensitive to flame, but when pressed and ignited detonate with ve ... |
19-10-2020 at 17:43
by: XeonTheMGPony |
For those distilling at home, how do you feed water into your condenser?
Not visible in the picture but the water goes out to a air over water heat exchanger with a couple c ... |
17-10-2020 at 04:40
by: XeonTheMGPony |
"Fixing" some sodium acetate after a poor dehydration attempt.
I gave a good write up on purification of it some where here. |
12-10-2020 at 17:05
by: XeonTheMGPony |
Mercury in Canada
that's how I got 4 pounds of it, lots and lots of asking, in the end cost me 20 bucks 
Harder o ... |
12-10-2020 at 13:05
by: XeonTheMGPony |
Rotary cane vacuum basics: use CaCl2 drying tube instead of cold trap
In refrigeration, for water contaminated systems it is recommended to preheat the pump and to use th ... |
9-8-2020 at 05:57
by: XeonTheMGPony |
Tour My Lab
it is for making chlorohydrate, for that you need strong stirring and cooling.
By aligning the bu ... |
29-7-2020 at 16:39
by: XeonTheMGPony |
best wire for an electric detonator
Steel wool is amazing very high resistance but hard to work.
30 to 40 gauge Ni chrome is my other ... |
27-7-2020 at 03:39
by: XeonTheMGPony |
Is Peroxide in Ethanol and issue for distillation?
they they add it to water. 2 drips of 35% H2O2 magically will turn water into a cure for every thing ... |
27-7-2020 at 03:31
by: XeonTheMGPony |
HotPlate Branding
[rquote=640728&tid=155794&author=Mateo_swe]Someone should do a nice writeup how to make a DI ... |
15-7-2020 at 05:09
by: XeonTheMGPony |
HotPlate Branding
As others said never go by temp, go by watts first and foremost and any thing below 500 is going to ... |
15-7-2020 at 03:43
by: XeonTheMGPony |
Azides
Having difficulties free basing my Hydrazene, When doing it as Chem player does, I end up with a goo ... |
5-7-2020 at 07:48
by: XeonTheMGPony |
how to distinguish a solution containing chloroform from one with dichloromethane?
I just distilled with a rectifying column with care full monitoring of heat, then from there I did p ... |
29-6-2020 at 04:12
by: XeonTheMGPony |
fire peroxide
here you can get 35% in 4 liter jugs. never seen it catch any thing on fire as of yet, |
26-6-2020 at 03:31
by: XeonTheMGPony |
Cryo Refrigerated Well ... thingy
why I prefer glycol secondary loops. |
25-6-2020 at 03:37
by: XeonTheMGPony |
fixing cracked glass / glassblowing
I use a map torch for most my glass stuff, propane turbo torch for smaller tube work.
I greatly m ... |
23-6-2020 at 16:20
by: XeonTheMGPony |
Cryo Refrigerated Well ... thingy
if you can do quality soldering (Brazing preferred you can make a -80c cold trap |
23-6-2020 at 16:17
by: XeonTheMGPony |
Best solvent to remove & dissolve unfired rifle primers
yup or a mobile solution is dripped in and surface tension does the rest. |
16-6-2020 at 16:39
by: XeonTheMGPony |
Distillation of solvents
[rquote=638500&tid=155583&author=Panache]just to be annoying to everyone, distillation rate ... |
16-6-2020 at 04:59
by: XeonTheMGPony |
Best solvent to remove & dissolve unfired rifle primers
The way the .22LR is primed will make this a head act no matter what way you go, with that said, I'd ... |
16-6-2020 at 04:42
by: XeonTheMGPony |
| [Next Page] |
