Justin
Hazard to Self
Posts: 84
Registered: 6-5-2010
Member Is Offline
Mood: No Mood
|
|
determing % in CH2O solution?
Hi, i recently recieved some formalin USP solution from a scientific supplier, it doesn't list a % but im guessing its the usual 37%. But to be sure i
want to titrate it. Is there any specific reagent/method to do this?
Thanks, Justin
|
|
|
unionised
International Hazard
Posts: 5104
Registered: 1-11-2003
Location: UK
Member Is Offline
Mood: No Mood
|
|
There are a number of approaches. In my experience the iodimetric one is better than the one based on hydroxylamine.
Have a look at this one.
http://motion.kodak.com/motion/uploadedFiles/US_plugins_acro...
as an example.
If you need great accuracy and precision then the best bet is the gravimetric determination based on reduction of silver oxide in t butylamine to
silver.
Don't bother with this one unless you need the result to 4 digits or more.
|
|
|
smuv
National Hazard
Posts: 842
Registered: 2-5-2007
Member Is Offline
Mood: Jingoistic
|
|
The msds must say. Formaldehyde must be listed because it is toxic/carcinogenic.
"Titanium tetrachloride…You sly temptress." --Walter Bishop
|
|
|
Justin
Hazard to Self
Posts: 84
Registered: 6-5-2010
Member Is Offline
Mood: No Mood
|
|
I purchased it from elemental scientific, they don't have a link to any msds's on their site, i might just have to email them. Its just listed as
"formaldehyde USP, solution" on the site and the bottle.
|
|
|
smuv
National Hazard
Posts: 842
Registered: 2-5-2007
Member Is Offline
Mood: Jingoistic
|
|
If you don't want to titrate. I would assume it to be a 37% formalin solution. Do a websearch, of usp formalin, it essentially confirms this.
"Titanium tetrachloride…You sly temptress." --Walter Bishop
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
