Baphomet
Hazard to Others
Posts: 211
Registered: 19-11-2006
Member Is Offline
Mood: No Mood
|
|
Separation of thiols and ketones
Hi everyone. Either I am an eccentric genius or blithering idiot. But I like to avoid vacuum distillations (esp. of mercaptans!) and so I want to run
something past you all..
The following is an extract from a Google Books entry, reproduced here for research purposes:
Quote: |
http://books.google.com/books?id=ZCXPte7PL0EC&pg=RA1-PA4...
Thiols are stronger acids than alcohols. Compare, for example, the pKa values of ethanol and ethanethiol in dilute aqueous solution:
Ch3CH2OH + H2O <=> CH3CH2O- + H3O pKa = 15.9
Ch3CH2SH + H2O <=> CH3CH2S- + H3O pKa = 8.5
The greater acidity of thiols compared to alcohols is a combination of two factors. First, S-H bonds are generally weaker than O-H bonds, which
facilitates removal of the S-H proton by a base. Second, sulfur (a third-period element) is larger than oxygen (a second-period element), which means
that the negative charge on an alkylsulfide ion (RS-) is delocalized over a larger area and is, therefore, more stable than the negative charge on an
alkoxide ion (RO-).
Thiols are sufficiently strong acids that when dissolved in aqeuous sodium hydroxide, they are converted completely to alkylsulfide salts:
CH3CH2SH + Na+OH- --> CH3CH2S-Na+ + H2O
pKa = 8.5 pKa = 15.7
(Stronger acid) (Stronger Base) (Weaker Base) (Weaker Acid)
To name salts of thiols, give the name of the cation first, followed by the name of the alkyl group to which is attached the suffice -sulfide. For
example, the sodium salt derived from ethanethiol is names sodium ethylsulfide.
|
This naturally leads me to conclude that separation of thiols and ketones could be as simple as:
- Adding NaOH solution
- Gently heating to drive off water
- Filtering to capture the alkylsulfide salt
Is this right? Thanks
\"Who ARE you? You\'re like the drummer from REO Speedwagon - nobody knows who you are\" from \'Employee of the Month\'
|
|
kclo4
National Hazard
Posts: 916
Registered: 11-12-2004
Location:
Member Is Offline
Mood: No Mood
|
|
Sulfides tend to under go hydrolysis rather easily I believe. So I would think that heating to drive off the water may lower yields or destroy your
product. Also, if its in a basic solution, I'd imagine it hydrolyzing even faster to an alcohol.
I don't know very much about thio chemistry, but I'd imagine this would happen at some point: RSNa + H2O = NaHS + ROH
If you could give us information on what chemicals you are dealing with, and if your wanting to keep both, or just one, we may be able to help you
more.
[Edited on 1-9-2008 by kclo4]
|
|
Baphomet
Hazard to Others
Posts: 211
Registered: 19-11-2006
Member Is Offline
Mood: No Mood
|
|
Thanks for the info kclo4, I should have thought of that. So heating is not an option...
I'm dealing with a mixture of butanethiol and MEK. The idea is to separate the butanethiol, and if it was possible to form a salt then it's even more
convenient. Because then the super stinkbomb can be set off with a small amount of acid
Should I try adding a stochiometric amount of NaOH pellets to the mix instead of a solution? Then the water could be dried-off in a CaCl2 chamber..?
I guess the other main thing I wanted to confirm, was that MEK and NaOH will not react.
\"Who ARE you? You\'re like the drummer from REO Speedwagon - nobody knows who you are\" from \'Employee of the Month\'
|
|
stoichiometric_steve
National Hazard
Posts: 827
Registered: 14-12-2005
Member Is Offline
Mood: satyric
|
|
MEK and NaOH will make a nice aldol condensation, even more so when heated.
|
|
Klute
International Hazard
Posts: 1378
Registered: 18-10-2006
Location: France
Member Is Offline
Mood: No Mood
|
|
Thiolates are very easily oxidized to their disulfides.... Only use cold, degassed condtions, or perhaps a dash of dithionite could you avoid this.
Although the smaller chained thiosl might be a little more resistant.
What are the proportions of the MEK and the butanthiol? Is a solution of the thiol in the ketone, or rather equimolar amounts?
Bisulfite adduct first came to my mind, but the bisulfite ion recats with tiolates to form Bunte salts (alkylthiosulfates), and considering, and
depending on the pH of the solution, you might have enough to drive the equilibrium forward enough...
I do think a simple fractionnation might be more adviseable. No need for vacuum, but use a bleah wash bottle to avoid any smell, and soak you
glassware in bleach or base bath after to remove the smell.
1-butanethiol boils at 98°C, and MEK at 79.5°C, so shoul dbe easily seperated with a good vigreux. There could be a azeotrope, so it all depends on
the proportions of each constituant. I take it you prepared the thiol in MEK? Or is it some kind of commercial solution? You could always recycle the
butanethiol-containing MEK for further reactions?
\"You can battle with a demon, you can embrace a demon; what the hell can you do with a fucking spiritual computer?\"
-Alice Parr
|
|
unionised
International Hazard
Posts: 5116
Registered: 1-11-2003
Location: UK
Member Is Offline
Mood: No Mood
|
|
I have a feeling that adding a base to that mixture wil give you a thioketal.
On the other hand, if you add the right base you might be able to do this. Thiols get their alternative name, mercaptans, from their reaction with
mercury compounds. OK, I'd rather distill mercaptans than play with lots of mercury salts, but I think you might be able to separate the thiols as
copper or zinc salts. With a bit of luck and experimentation you might get a salt that's nice and insoluble so you could just precipitate the thiol
salt, filter it off and then distill the MEK to clean it up. Adding acid to the salt and distilling should regenerate the thiol.
|
|
Baphomet
Hazard to Others
Posts: 211
Registered: 19-11-2006
Member Is Offline
Mood: No Mood
|
|
Thanks for the info guys. I will try NaOH in a cold solution, hopefully it will not form thioketals. Maybe I can add a dessicant like CaCl2 directly
to the mixture, and if there is not too much water then it can be trapped as water of crystallisation.
\"Who ARE you? You\'re like the drummer from REO Speedwagon - nobody knows who you are\" from \'Employee of the Month\'
|
|
Klute
International Hazard
Posts: 1378
Registered: 18-10-2006
Location: France
Member Is Offline
Mood: No Mood
|
|
Don't add CaCl2, it can react with MEK as it can do with acetone. In any case, it will promote aldol condensation of MEK, again just like acetone...
I would really go for a standard atmospheric fractionnation.
\"You can battle with a demon, you can embrace a demon; what the hell can you do with a fucking spiritual computer?\"
-Alice Parr
|
|
ziqquratu
Hazard to Others
Posts: 385
Registered: 15-11-2002
Member Is Offline
Mood: No Mood
|
|
If you're so dead against distillation (why? You can, as Klute said, avoid the smell by using simple bleach!), extraction might work. Dissolve in
ether, DCM, whatever. Basify with dilute NaOH (1-2 M, maybe), the thiolate should go into the aqueous and you can extract the ketone. Then acidify and
extract the thiol.
You shouldn't have a major issue of ketalisation or aldol reaction if it's kept at RT or below. Work relatively quickly, though, just to be sure.
Once again, I vote with Klute - distillation would surely be the easiest and most certain method for this job!
|
|
Baphomet
Hazard to Others
Posts: 211
Registered: 19-11-2006
Member Is Offline
Mood: No Mood
|
|
Will that work? MEK is soluble in water to some extent...
Thanks for the pointer, but have you ever smelled a low-mw thiol?!
\"Who ARE you? You\'re like the drummer from REO Speedwagon - nobody knows who you are\" from \'Employee of the Month\'
|
|
ziqquratu
Hazard to Others
Posts: 385
Registered: 15-11-2002
Member Is Offline
Mood: No Mood
|
|
I work with thiols fairly frequently (although I'm focusing on some non-sulfur work at the moment, which is nice!)
And you'll need to extract a few times (once won't be enough) to get all the MEK out of there. Same will apply when you come to extract the thiol -
many of them are somewhat water soluble, too. But ultimately, the vast majority WILL move into the organic layer, as it is preferentially soluble in
that.
|
|
Klute
International Hazard
Posts: 1378
Registered: 18-10-2006
Location: France
Member Is Offline
Mood: No Mood
|
|
Well, I won't go insisting anymore than necesarry, but
From my experience with thiols, even in solution they smell BAD. I'm sure you will be much more exposed to the smell while extarcting, acidifying,
etc, than just dumping the whole mess in a distn setup, distilling most of the MEK with a bleach wash bottle connected to the vacuum inlet, swapping
receivers when temps goes up, discarding the MEK in dilute bleach, collecting your thiol, stoppering the receiver, and quickly immersing the whole
setup in a tub of dilute bleach (or directly rincing it with bleach, setup closed).
I'm sure your product will contain much less MEK than by extracting, and you will have to remove your solvent at one point and perform a distn, so why
noy just do everything in one step and in a closed setup?
BTW, did you make the butanethiol yourself?
\"You can battle with a demon, you can embrace a demon; what the hell can you do with a fucking spiritual computer?\"
-Alice Parr
|
|
Baphomet
Hazard to Others
Posts: 211
Registered: 19-11-2006
Member Is Offline
Mood: No Mood
|
|
OK well.. probably distillation would be easier. But I'm interested in other methods anyway. It's not just the end result but the learning process
that matters. I'll try distill but have thought of another harebrained idea to try as well - apparently PbO can form a complex with thiols which then
falls out of solution and can be recovered with acidification.
Plus there is the added benefit that the thiol will already be in a salt form. Where with a distill I will still need to convert to a salt afterward.
Yes I made the butanethiol myself. From rotten fish and garbage juice
\"Who ARE you? You\'re like the drummer from REO Speedwagon - nobody knows who you are\" from \'Employee of the Month\'
|
|
Klute
International Hazard
Posts: 1378
Registered: 18-10-2006
Location: France
Member Is Offline
Mood: No Mood
|
|
Don't got throwing lead salts on to people now
So you extarct rotten fish and garbage with MEK? Nice weekend distraction, I'm sure your relatives must like it
Let us know hwo it goes!
\"You can battle with a demon, you can embrace a demon; what the hell can you do with a fucking spiritual computer?\"
-Alice Parr
|
|
tapira1
Hazard to Others
Posts: 168
Registered: 9-10-2006
Location: Here!!!
Member Is Offline
Mood:
|
|
Butanethiol
BUtanethiol is toxic to males; you could get sterile (donot know if this is reversible). On the other hand, by no means basic treatment could lead you
to a separation without entering in aldol condensations. You may think perhaps in oxidizing the thiol to the disulfide, which should be solid or at
least have a high BP and then distill your ketone before reducing again the disulfide.
|
|
Texium
|
Thread Pruned 10-7-2016 at 19:50 |