Pages:
1
2 |
Petn1933
Hazard to Others
Posts: 106
Registered: 16-9-2019
Member Is Offline
|
|
My new 1 pound TNT
This is my new TNT
now I will be able to test composition B and pentolit!
|
|
underground
National Hazard
Posts: 702
Registered: 10-10-2013
Location: Europe
Member Is Offline
|
|
I am jealous
|
|
wessonsmith
Hazard to Others
Posts: 203
Registered: 15-2-2018
Location: elsewhere
Member Is Offline
|
|
I see your 1 lb of TNT
and raise you 2 lbs of 1.9 RE Thermobaric Composition.
[Edited on 29-11-2019 by wessonsmith]
|
|
Petn1933
Hazard to Others
Posts: 106
Registered: 16-9-2019
Member Is Offline
|
|
|
|
Petn1933
Hazard to Others
Posts: 106
Registered: 16-9-2019
Member Is Offline
|
|
Woow
looks cool , what is this?
[Edited on 29-11-2019 by Petn1933]
|
|
wessonsmith
Hazard to Others
Posts: 203
Registered: 15-2-2018
Location: elsewhere
Member Is Offline
|
|
It's my Thermobaric Comp.
ETN 55.00 (g)
Al(3μm/) 12.00
Mg/Al(44μm/325mesh) 18.00 (50/50 mix)
Soy Lecithin(liquid) 0.300
lmwHTPB Resin 11.69 (lmw=Low Molecular Weight)
Isodecyl Pelargonate Plasticizer 0.73
Modified MDI Isocyanate Curative 1.84
CAO-5 Antioxidant 0.44
|
|
Petn1933
Hazard to Others
Posts: 106
Registered: 16-9-2019
Member Is Offline
|
|
So blow it up as soon as possible!
|
|
TGSpecialist1
Hazard to Self
Posts: 53
Registered: 24-12-2017
Member Is Offline
Mood: always tired
|
|
You should try a 50/50 melt of TNT with Fe2O3 or MnO2, it would first get reduced to Fe/Mn vapor then reoxidized by air, the effect could be
interesting.
|
|
TGSpecialist1
Hazard to Self
Posts: 53
Registered: 24-12-2017
Member Is Offline
Mood: always tired
|
|
How many batches it took to make a half kg of ETN?
[Edited on 30-11-2019 by TGSpecialist1]
|
|
wessonsmith
Hazard to Others
Posts: 203
Registered: 15-2-2018
Location: elsewhere
Member Is Offline
|
|
I can make 600g twice recrystallized in (2) batches.
I make 315mL of Fuming Nitric Acid in 1 hr using 850g of Potassium Nitrate and 510mL 98% Sulfuric Acid.
ETN is made using 180g Erythritol dehydrated with 440mL of 98% Sulfuric acid, then nitrated with 315mL of the Fuming Nitric Acid. The yield is 300g
of ETN 67.8% of theoretical.
|
|
Petn1933
Hazard to Others
Posts: 106
Registered: 16-9-2019
Member Is Offline
|
|
I think fuming hno3 should be used for more important things
|
|
wessonsmith
Hazard to Others
Posts: 203
Registered: 15-2-2018
Location: elsewhere
Member Is Offline
|
|
It is effortless and relatively inexpensive for me to make fuming nitric acid. It's cheaper for me to make fuming nitric acid than it would be for me
to buy 67.2% nitric acid. Plus, purchasing 10L of 67.2% nitric acid would get me to put on a watch list.
|
|
chemist1243
Hazard to Others
Posts: 170
Registered: 7-8-2019
Member Is Offline
|
|
christmas came early!
|
|
G-Coupled
Hazard to Others
Posts: 287
Registered: 9-3-2017
Member Is Offline
Mood: Slightly triturated
|
|
Quote: Originally posted by wessonsmith |
It is effortless and relatively inexpensive for me to make fuming nitric acid. It's cheaper for me to make fuming nitric acid than it would be for me
to buy 67.2% nitric acid. Plus, purchasing 10L of 67.2% nitric acid would get me to put on a watch list. |
What's your procedure for making Nitric Acid, as a matter of interest?
It did? How, and for whom?
EDIT: Oh, for the OP's new boomstick - I see.
[Edited on 1-12-2019 by G-Coupled]
|
|
wessonsmith
Hazard to Others
Posts: 203
Registered: 15-2-2018
Location: elsewhere
Member Is Offline
|
|
1000mL round bottom flask in a heating mantle with a distillation setup. The key is to use salted ice (I use Ammonium Nitrate) to keep the distilled
Nitric Acid very cold so that the Nitrogen Dioxide stays dissolved in the Nitric Acid. I turn the heating mantle to high until I start to see
bubbling, then reduce heat to medium. I let the Potassium Nitrate turn into a gel-like consistency and then crank the temperature to 90% high. This
pushes the conversion to Nitric Acid into overdrive. Yes, you are creating some Nitrogen Dioxide due to the higher temp, but since the receiving
flask is chilled, it remains dissolved in the Nitric Acid.
When I make ETN, the Fuming Nitric Acid starts at -15C, then I add to the Nitric Acid the dehydrated Erythritol dissolved in Sulfuric Acid in 4 parts.
Doing it this way, you will not see any brown Nitrogen Dioxide fumes because, under 15C, the Nitrogen Dixoide converts back into Nitric Acid in the
presence of H20.
The advantage of dehydrating the Erythritol in 98% Sulfuric Acid first is that you eliminate the chance of a runaway when you nitrate it since you
need to heat the nitration mixture instead of cooling it.
|
|
Petn1933
Hazard to Others
Posts: 106
Registered: 16-9-2019
Member Is Offline
|
|
Quote: Originally posted by wessonsmith |
It is effortless and relatively inexpensive for me to make fuming nitric acid. It's cheaper for me to make fuming nitric acid than it would be for me
to buy 67.2% nitric acid. Plus, purchasing 10L of 67.2% nitric acid would get me to put on a watch list. |
Watchlist is very important! be careful!
|
|
Petn1933
Hazard to Others
Posts: 106
Registered: 16-9-2019
Member Is Offline
|
|
if for etn synthesis we use this ratio , the product purity is about 65%
H2so4: 90 ml
Hno3: 60 ml
Erythritol:15
Of course, this is the way for people like me who don't have fast and convenient access to fuming hno3!
|
|
Petn1933
Hazard to Others
Posts: 106
Registered: 16-9-2019
Member Is Offline
|
|
https://youtu.be/vtan4_wfZVM
This movie is about a tnt factory in Canada in 1943. I think it's worth seeing.
|
|
Rocinante
Hazard to Others
Posts: 121
Registered: 13-11-2017
Member Is Offline
Mood: No Mood
|
|
Wesson: when will be able to see a video of your composition? Like 50 g above ground test ( 1 m above the ground, paper box 1 m from it).
|
|
Petn1933
Hazard to Others
Posts: 106
Registered: 16-9-2019
Member Is Offline
|
|
Quote: Originally posted by Rocinante | Wesson: when will be able to see a video of your composition? Like 50 g above ground test ( 1 m above the ground, paper box 1 m from it).
|
I'm waiting too!:/
|
|
wessonsmith
Hazard to Others
Posts: 203
Registered: 15-2-2018
Location: elsewhere
Member Is Offline
|
|
So here is a video with 190g of thermobaric comp in a homade device. 2.1 meter deep water.
Put the headphones on for full effect.
https://youtu.be/ruZJrPMLEfo
[Edited on 1-12-2019 by wessonsmith]
|
|
Petn1933
Hazard to Others
Posts: 106
Registered: 16-9-2019
Member Is Offline
|
|
Under water!? :/
Homemade device looks cool!
|
|
wessonsmith
Hazard to Others
Posts: 203
Registered: 15-2-2018
Location: elsewhere
Member Is Offline
|
|
I would need to travel at least 1.5 hour away from where I live to set this stuff off above ground. It is VERY loud and could be heard for a mile in
all directions. Underwater is still very loud.
|
|
phlogiston
International Hazard
Posts: 1378
Registered: 26-4-2008
Location: Neon Thorium Erbium Lanthanum Neodymium Sulphur
Member Is Offline
Mood: pyrophoric
|
|
EM is not my main interest, so please excuse my naivety, but if I understood correctly that thermobaric explosives use atmospheric oxygen to oxidise
the excess fuel in the composition, would detonating them underwater not severely compromise their potential energetic yield?
[Edited on 2-12-2019 by phlogiston]
-----
"If a rocket goes up, who cares where it comes down, that's not my concern said Wernher von Braun" - Tom Lehrer
|
|
Rocinante
Hazard to Others
Posts: 121
Registered: 13-11-2017
Member Is Offline
Mood: No Mood
|
|
The aluminium burns in hot water vapor.
Smith: Do you have a spare TBX grenade? Could you place a weighted down empty plastic bottle in the water, like 5 m away from it. Just to see the
effect of the device at 5 m, underwater?
|
|
Pages:
1
2 |