Boffis
International Hazard
Posts: 1836
Registered: 1-5-2011
Member Is Offline
Mood: No Mood
|
|
Preventing peroxide formation in recovered ether
I use ether fairly frequently and try to recover as much as possible by distillation. This is not difficult or dangerous if carried out with proper
precautions and the right equipment. However, once distilled the stabilizing compound BHT (tert.-butylated hydroxytoluene?) is lost. Are there other
suitable alternatives that are more readily available?
4-tert.-butyl catechol is available on ebay as is hydroquinone but are these suitable alternatives?
|
|
|
DavidJR
National Hazard
Posts: 908
Registered: 1-1-2018
Location: Scotland
Member Is Offline
Mood: Tired
|
|
I got BHT from eBay a while ago. I also think that hydroquinone would do the job just fine.
|
|
|
unionised
International Hazard
Posts: 5104
Registered: 1-11-2003
Location: UK
Member Is Offline
Mood: No Mood
|
|
The old school approach was to put copper gauze in the ether.
I have no idea if it worked...
|
|
|
karlos³
International Hazard
Posts: 1520
Registered: 10-1-2011
Location: yes!
Member Is Offline
Mood: oxazolidinic 8)
|
|
Use copper wire, I do it all the time and it works(if the ether is already peroxide free).
[Edited on 2-2-2020 by karlos³]
|
|
|
Fery
National Hazard
Posts: 990
Registered: 27-8-2019
Location: Czechoslovakia
Member Is Offline
|
|
This is not true ether stabilizer, but you can use FeSO4 to destroys peroxides before distillation and peroxides are dangerous at the end of
distillation.
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
