metalresearcher
National Hazard
Posts: 731
Registered: 7-9-2010
Member Is Offline
Mood: Reactive
|
|
KOH + Mg turnings => potassium metal ?
I tried in a steel tube of 25mm diameter and 50mm length and squeezed and weklded together on one side the following:
mixed about 1g KOH flakes with 1g Mg turnings and heated it to dull red hot (600oC).
I saw light purplish light (the K color) coming from the open end of the tube and suddenly white smoke appeared and filled the top half of my fume
hood (but driven away by the vent in a few seconds). Then the reaction was over.
Did this tell that some K metal was formed which immediately burned to the white K2O smoke ?
P.S. Wear gloves if you repeat this as tiny droplets of molten lye might spatter on your hands ans NASTY burns occur otherwise. Perform in a fume hood
or outdoors (use a face shield in the latter case !).
[Edited on 2011-2-15 by metalresearcher]
[Edited on 2011-2-15 by metalresearcher]
|
|
|
bfesser
Resident Wikipedian
Posts: 2114
Registered: 29-1-2008
Member Is Offline
Mood: No Mood
|
|
http://www.sciencemadness.org/talk/viewthread.php?tid=14970
|
|
|
hkparker
National Hazard
Posts: 601
Registered: 15-10-2010
Location: California, United States
Member Is Offline
Mood: No Mood
|
|
There is a massive thread going on about this, not to mention this doesn't belong in reagents and apparatus acquisition... detritus?
My YouTube Channel
"Nothing is too wonderful to be true if it be consistent with the laws of nature." -Michael Faraday
|
|
|
vulture
Forum Gatekeeper
Posts: 3330
Registered: 25-5-2002
Location: France
Member Is Offline
Mood: No Mood
|
|
Please continue the discussion in the aforementioned thread.
One shouldn't accept or resort to the mutilation of science to appease the mentally impaired.
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
