LuckyWinner
Hazard to Others
Posts: 163
Registered: 27-8-2018
Member Is Offline
|
|
Making Pure Sodium Iodide the Easy Way?
this was done:
Iodine and NaOh reactions a la
(6)NaOH + (3)I2 --> NaIO3 + (5)NaI + (3)H2O
exact stoichiometric ratios were followed.
this yielded a white solution without any yellow tint.
the calculation may does not account for any iodine that is
lost mechanically by its previous KI extraction...
this can cause a slight excess of NaOh when making Sodium Iodide
and will cause it to be contaminated with it.
separating this NaOh out seems to be a pain in the ass.
since it reacts with acetone and is also soluble in ethanol, water,...
the easiest way to prevent a NaOh contamination is by
adding NaOh to a hot aqueous Iodine solution and KEEP the
solution at a slightly yellow tint.
this should be the proper indicator for an Iodine excess.
boil down the liquid , filter out the unreacted iodine.
left is a clean NaI + NaIO3 solution?
is this correct or anything better then this?
this NaI is then used for a finkelstein,
there cant be any NaOh impurities present...
|
|
|
rockyit98
Hazard to Others
Posts: 283
Registered: 12-4-2019
Location: The Known Universe
Member Is Offline
Mood: no mood is a good mood
|
|
mix CaSO3 with I2 in a NaOH media let the CaSO4 settle down top, off NaI solution. CaSO3 can be made by mixing Na2SO3 with CaCl2 it also sink to
bottom.
"A mind is a terrible thing to lose"-Meisner
|
|
|
LuckyWinner
Hazard to Others
Posts: 163
Registered: 27-8-2018
Member Is Offline
|
|
Quote: Originally posted by rockyit98  | | mix CaSO3 with I2 in a NaOH media let the CaSO4 settle down top, off NaI solution. CaSO3 can be made by mixing Na2SO3 with CaCl2 it also sink to
bottom. |
you mean to
I2 + NaOh = NaI + excess NaOh
this excess NaOh reacts with the CaSO3 as folllows
CaSO3 + NaOH = Ca(OH)2 + Na2SO3
product
Ca(OH)2 is only slightly soluble in water (0.16g Ca(OH)2/100g water at 20°C) forming a basic solution called lime water.
sodium sulfite Na2SO3 , is soluble in water and will then be a contamination.
|
|
|
teodor
National Hazard
Posts: 872
Registered: 28-6-2019
Location: Heerenveen
Member Is Offline
|
|
Will potassium oxalate + I2 reaction work as with bromine, as in Brauer's preparation for "Bromine": "The distilled bromine is reduced to KBr by
dropwise addition to a hot solution of recrystallized, halogen-free potassium oxalate."
|
|
|
rockyit98
Hazard to Others
Posts: 283
Registered: 12-4-2019
Location: The Known Universe
Member Is Offline
Mood: no mood is a good mood
|
|
| Quote: Originally posted by LuckyWinner | | Quote: Originally posted by rockyit98 | | mix CaSO3 with I2 in a NaOH media let the CaSO4 settle down top, off NaI solution. CaSO3 can be made by mixing Na2SO3 with CaCl2 it also sink to
bottom. |
you mean to
I2 + NaOh = NaI + excess NaOh
this excess NaOh reacts with the CaSO3 as folllows
CaSO3 + NaOH = Ca(OH)2 + Na2SO3
product
Ca(OH)2 is only slightly soluble in water (0.16g Ca(OH)2/100g water at 20°C) forming a basic solution called lime water.
sodium sulfite Na2SO3 , is soluble in water and will then be a contamination. |
CaSO3(not soluble) + NaOH +I2
-------->CaSO4(not soluble) + 2NaI +H2O
"A mind is a terrible thing to lose"-Meisner
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
