| Pages:
1
2
3 |
Neal
Hazard to Others
Posts: 116
Registered: 24-12-2021
Location: Chicago, IL, USA.
Member Is Offline
|
|
Quote: Originally posted by Rainwater  |
2) delta H, and delta S are really only valid at the pressure and temperature at which they were recorded. They do change.
delta H, and delta S also change as the phase of matter changes.
For most calculations having one value for solid, another for liquid, one for gas, and another for aquaus solution
is sufficient to determine the basic requirements for a reaction to take place. Im going to go ahead and toss disassociation into cations and anions
into this category
|
What matters to me is, whether they both increase or decrease together, without the ratio changing much. -TdeltaS.
As well as whether they both postive/negative and change together.
If that happened, then it would surely be a problem.
But for using room temp calculations, I'm getting temps of below absolutely 0. But these are questions I may ask at the Chemistry Stack Exchange.
|
|
|
Texium
Administrator
Posts: 4519
Registered: 11-1-2014
Location: Salt Lake City
Member Is Offline
Mood: PhD candidate!
|
|
| Quote: Originally posted by Neal | | Quote: Originally posted by DraconicAcid |
At whatever particular temperature at which DeltaGo = 0, then K will be equal to 1. At any other temperature, K will not be 1, and
DeltaGo will not be zero. |
Right, so DeltaG-standard is not 0. So somethingThatIsNot0 = -RT * 0.
A contradiction still. |
Uh, no. It’s not a contradiction. DA literally said deltaG is 0 when K is 1 and in
any other case it will not be. When deltaH equals T(deltaS) deltaG equals 0. Change T and deltaH no longer equals T(deltaS)… deltaG no longer equals
0.
I’m not sure what you’re not understanding.
|
|
|
Neal
Hazard to Others
Posts: 116
Registered: 24-12-2021
Location: Chicago, IL, USA.
Member Is Offline
|
|
When Q = 1, then it doesn't matter whether he meant Delta G or Delta G standard = 0, the whole thing collapses.
You either get.
0 = somethingNot0 + 0
or SomethingNot0 = 0 + 0.
[Edited on 7-8-2023 by Neal]
|
|
|
DraconicAcid
International Hazard
Posts: 4279
Registered: 1-2-2013
Location: The tiniest college campus ever....
Member Is Offline
Mood: Semi-victorious.
|
|
| Quote: Originally posted by Neal |
When Q = 1, then it doesn't matter whether he meant Delta G or Delta G standard = 0, the whole thing collapses.
You either get.
0 = somethingNot0 + 0
or SomethingNot0 = 0 + 0.
[Edited on 7-8-2023 by Neal] |
No. When Q =1 , then deltaG = deltaGo, because when Q =1 , then you're at standard conditions of pressure and concentration.
Please remember: "Filtrate" is not a verb.
Write up your lab reports the way your instructor wants them, not the way your ex-instructor wants them.
|
|
|
Neal
Hazard to Others
Posts: 116
Registered: 24-12-2021
Location: Chicago, IL, USA.
Member Is Offline
|
|
| Quote: Originally posted by DraconicAcid | | Quote: Originally posted by Neal |
When Q = 1, then it doesn't matter whether he meant Delta G or Delta G standard = 0, the whole thing collapses.
You either get.
0 = somethingNot0 + 0
or SomethingNot0 = 0 + 0.
[Edited on 7-8-2023 by Neal] |
No. When Q =1 , then deltaG = deltaGo, because when Q =1 , then you're at standard conditions of pressure and concentration.
|
That's weird, he originally said
At equilibrium, Q=K, and DeltaG is 0, which is how the first equation is derived, because:
That's like saying all equations are at equilibrium at 298 K.
|
|
|
DraconicAcid
International Hazard
Posts: 4279
Registered: 1-2-2013
Location: The tiniest college campus ever....
Member Is Offline
Mood: Semi-victorious.
|
|
| Quote: Originally posted by Neal | | Quote: Originally posted by DraconicAcid | | Quote: Originally posted by Neal |
When Q = 1, then it doesn't matter whether he meant Delta G or Delta G standard = 0, the whole thing collapses.
You either get.
0 = somethingNot0 + 0
or SomethingNot0 = 0 + 0.
[Edited on 7-8-2023 by Neal] |
No. When Q =1 , then deltaG = deltaGo, because when Q =1 , then you're at standard conditions of pressure and concentration.
|
That's weird, he originally said
At equilibrium, Q=K, and DeltaG is 0, which is how the first equation is derived, because:
That's like saying all equations are at equilibrium at 298 K. |
No, because deltaGo is not zero at equilibrium.
Please remember: "Filtrate" is not a verb.
Write up your lab reports the way your instructor wants them, not the way your ex-instructor wants them.
|
|
|
Neal
Hazard to Others
Posts: 116
Registered: 24-12-2021
Location: Chicago, IL, USA.
Member Is Offline
|
|
| Quote: Originally posted by DraconicAcid | | Quote: Originally posted by Neal | | Quote: Originally posted by DraconicAcid | | Quote: Originally posted by Neal |
When Q = 1, then it doesn't matter whether he meant Delta G or Delta G standard = 0, the whole thing collapses.
You either get.
0 = somethingNot0 + 0
or SomethingNot0 = 0 + 0.
[Edited on 7-8-2023 by Neal] |
No. When Q =1 , then deltaG = deltaGo, because when Q =1 , then you're at standard conditions of pressure and
concentration. |
That's weird, he originally said
At equilibrium, Q=K, and DeltaG is 0, which is how the first equation is derived, because:
That's like saying all equations are at equilibrium at 298 K. |
No, because deltaGo is not zero at equilibrium. |
It is if the 2 Delta-Gs equal each other, and 1 of them equals 0. See the bolded quote.
[Edited on 7-8-2023 by Neal]
[Edited on 7-8-2023 by Neal]
|
|
|
DraconicAcid
International Hazard
Posts: 4279
Registered: 1-2-2013
Location: The tiniest college campus ever....
Member Is Offline
Mood: Semi-victorious.
|
|
They will only equal each other if the system is at standard conditions (1 atm pressure for all gases, 1 mol/L for all solutes). This is not usually
the case for equilibrium, where K = 1 and deltaG = 0.
Please remember: "Filtrate" is not a verb.
Write up your lab reports the way your instructor wants them, not the way your ex-instructor wants them.
|
|
|
Neal
Hazard to Others
Posts: 116
Registered: 24-12-2021
Location: Chicago, IL, USA.
Member Is Offline
|
|
Okay, I guess I got so messed up when you guys threw in Q. I'm looking for T, when K = 1. What do I care to know if Q = K if K doesn't equal 1. I
would only care about Q = K if they = 1.
|
|
|
DraconicAcid
International Hazard
Posts: 4279
Registered: 1-2-2013
Location: The tiniest college campus ever....
Member Is Offline
Mood: Semi-victorious.
|
|
When K = 1, DeltaG(standard) is zero. T = deltaH/deltaS.
Please remember: "Filtrate" is not a verb.
Write up your lab reports the way your instructor wants them, not the way your ex-instructor wants them.
|
|
|
Rainwater
National Hazard
Posts: 800
Registered: 22-12-2021
Member Is Offline
Mood: indisposition to activity
|
|
I spent a lot of time working through these types of problems before I got a good hold on what I was doing.
Many beers later it became clear.
Hope this helps
| Quote: | | But for using room temp calculations, I'm getting temps of below absolutely 0. But these are questions I may ask at the Chemistry Stack Exchange.
|
What this basicly means is the reaction will be non spontaneous.
For example taking CO2 and producing C and O2
DeltaG = 0 at -133215.3 K
Far below absolute zero, currently out of the amateurs ability.
Im missing what your not understanding. So here is an example very similar to your origional post, from start to finish
Lets look at making ammonia at 1 atm and no catalyst
( and no kinetics, just thermodynamics )
$$N_2 + 3H_2 \leftrightarrows 2NH_3$$
| Code: | Thermodynamic values
reactant state ΔH(KJ/mol) ΔS(J/mol*K)
N2 (g) 0 191.50168
H2 (g) 0 130.586824
Nh3 (g) -46.10768 192.33848
|
First we need the sum of the deltaH and deltaS of the reagents and products
Reagents
0N2 ΔH + 3 * 0H2 ΔH = 0ΔH reagents
We have 3 hydrogen molecules so that value has to be multiplied by 3.
Then the same for ΔS
191.50168N2 ΔS + 3 * 130.586824H2 ΔS = 583.262152ΔS reagents
Products
2 * -46.10768NH3 ΔH = -92.21536ΔH product
2 * 192.33848 NH3 ΔS = 384.67696 NH3 ΔS
Subtract the ΔH of the reactants from the products for -92.2154 kJ/mol
Subtract the ΔS of the reactants from the products for -198.5852 J mol/K
Now all the variables for the formula ΔG = ΔH - TΔS are available.
To solve for T when ΔG=0 we have to rearrange the formula like so
0 = ΔH - TΔS ... add "TΔS" to both sides
TΔS = ΔH ... divide both sides deltaS
T = ΔH ÷ ΔS
Now we have to convert our units to match, im just making everything kJ
T is in kelvin
ΔH ÷ (ΔS÷1000) = T
-92.2154 ÷ ( -198.5852 ÷ 1000 ) = 464.36 K
We have solved all varables, for deltaG = 0
now lets see what the equilibrium equation says.
ΔG = -RT ln(Keq)
There is no ΔH or ΔS here. So ignore their existence for a moment.
Keq is basicly a value which was recorded experimently and some genuine genius used it to discover a mathematical relationship to deltaG
for reactions taking place in the gas phase
(need verification here, i could be wrong about the gas phase bit)
Thanks to this relationship, we can rearrange the equation to solve for unknown values.
If deltaG is = 0, because of this relationship, Keq = 1
0 = -RTwe calculated above*ln(Keq)
Given that Keq is 1 at equilibrium
And
deltaG is 0 at equilibrium, for any given reaction at the calculated T.
This equation holds true, simply because the natural log of 1equilibrium is 0, and anything multiplied by 0 is 0
If any conditions of the reaction change, the ΔG = ΔH - TΔS needs to be recalculated to produce the correct results.
Back to the orginal question
At first glance, I would solve this by plugging in the values for sodium and chlorine out of the appendix of my text book, then solving for T when
deltaG = 0
[Edited on 9-8-2023 by Rainwater]
"You can't do that" - challenge accepted
|
|
|
Neal
Hazard to Others
Posts: 116
Registered: 24-12-2021
Location: Chicago, IL, USA.
Member Is Offline
|
|
Okay, so I'm getting -411/.072 = -5,708 K.
Or at least, 2 * that, for 2 mol.
[Edited on 9-8-2023 by Neal]
|
|
|
DraconicAcid
International Hazard
Posts: 4279
Registered: 1-2-2013
Location: The tiniest college campus ever....
Member Is Offline
Mood: Semi-victorious.
|
|
| Quote: Originally posted by Neal |
Okay, so I'm getting -411/.072 = -5,708 K.
Or at least, 2 * that, for 2 mol.
[Edited on 9-8-2023 by Neal] |
If you get a negative temperature in this calculation, then the reaction never has K = 1. either K is always larger, or K is always smaller.
If you change how you write the equation (such as Na + 1/2 Cl2 --> NaCl vs 2 Na + Cl2 --> 2 NaCl), you'll double both deltaH and deltaS, but
the ratio (and thus T) will remain unchanged.
Please remember: "Filtrate" is not a verb.
Write up your lab reports the way your instructor wants them, not the way your ex-instructor wants them.
|
|
|
Neal
Hazard to Others
Posts: 116
Registered: 24-12-2021
Location: Chicago, IL, USA.
Member Is Offline
|
|
| Quote: Originally posted by DraconicAcid | | Quote: Originally posted by Neal |
Okay, so I'm getting -411/.072 = -5,708 K.
Or at least, 2 * that, for 2 mol.
[Edited on 9-8-2023 by Neal] |
If you get a negative temperature in this calculation, then the reaction never has K = 1. either K is always larger, or K is always smaller.
If you change how you write the equation (such as Na + 1/2 Cl2 --> NaCl vs 2 Na + Cl2 --> 2 NaCl), you'll double both deltaH and deltaS, but
the ratio (and thus T) will remain unchanged. |
What about this equation.
H2O(l) <-> H2O(s)
Equilibrium should be at 0 C, right? Water and ice.
My chem textbook doesn't have the values for ice, only liquid water and steam.
But I'll use liquid water.
But even getting -285/.07 = -4071 K. Something doesn't seem right here.
[Edited on 9-8-2023 by Neal]
|
|
|
DraconicAcid
International Hazard
Posts: 4279
Registered: 1-2-2013
Location: The tiniest college campus ever....
Member Is Offline
Mood: Semi-victorious.
|
|
It looks like you're dividing the enthalpy of formation of liquid water by its absolute entropy. You have to use reaction enthalpies and reaction
entropies, or you're calculating nonsense.
My handy textbook doesn't have ice in it, but it does have steam. So let's look at H2O(l) <==> H2O(g)
Enthalpy of rxn = products - reactants = -241.83 kJ/molk - -285.83 kJ/mol = +44.00 kJ/mol (deltaHrxn)
Entropy of rxn = products - reactants = 188.84 J/molK - 69.95 J/moK = + 118.89 J/molK (deltaSrxn)
T = 44 000 J/mol / 118.89 J/molK = 370.1 K (96.9 C, because enthalpy and entropy of rxn isn't entirely independent of temperature)
Does that make more sense?
Please remember: "Filtrate" is not a verb.
Write up your lab reports the way your instructor wants them, not the way your ex-instructor wants them.
|
|
|
Neal
Hazard to Others
Posts: 116
Registered: 24-12-2021
Location: Chicago, IL, USA.
Member Is Offline
|
|
Okay, so 2NaCl should be.
Delta H = 2* -410 - (2*0 + 0) = -820
Delta S = 2*.072 - (2*.051 + .2223) = .144 - .3243 = -.1803
-820/-.1803 = 4547 K sheesh.
I will try Na + 1/2 Cl2 -> NaCl
Delta H = -410
Delta S = .072 - .2733 = -.2013
-410/-.2013 = 2036 K
Ah, so ratio is not the same.
|
|
|
DraconicAcid
International Hazard
Posts: 4279
Registered: 1-2-2013
Location: The tiniest college campus ever....
Member Is Offline
Mood: Semi-victorious.
|
|
Using your numbers, deltaS = 0.072 - (0.051 + 0.2223/2) = -0.09015 kJ/molK
-410 kJ/mol / -0.09015 kJ/molK = 4547 K
Same thing.
Please remember: "Filtrate" is not a verb.
Write up your lab reports the way your instructor wants them, not the way your ex-instructor wants them.
|
|
|
Neal
Hazard to Others
Posts: 116
Registered: 24-12-2021
Location: Chicago, IL, USA.
Member Is Offline
|
|
| Quote: Originally posted by DraconicAcid | Using your numbers, deltaS = 0.072 - (0.051 + 0.2223/2) = -0.09015 kJ/molK
-410 kJ/mol / -0.09015 kJ/molK = 4547 K
Same thing. |
Ah. 1/2 Cl2 I forgot to / by 2.
Cool thanks.
Okay so we're at 4547 K, or 4274 C.
Here's something to make it weirder. NaCl has a melting point, and bp.
This temperature is above both.
So, at this temp NaCl wouldn't exist as a solid. Making it quite contradictory to be at equilibrium?
Ironically, my text does have values for NaCl liquid and gas. As well as Na for liquid and gas. And this is above Na's mp and bp too. So I could run 2
versions of this in liquid and gas phase. Weird.
|
|
|
Texium
Administrator
Posts: 4519
Registered: 11-1-2014
Location: Salt Lake City
Member Is Offline
Mood: PhD candidate!
|
|
Well yeah, that’s fully logical. When you heat NaCl up to its melting point it melts, but it doesn’t start spontaneously splitting into its
constituent elements… that reaction is still very far from its equilibrium. There is no instance that you would have Na(s) Cl2(g) and
NaCl(s) hanging out together in a state of equilibrium. But you can imagine that at an extremely high temperature, at which NaCl is a gas, under
certain conditions, the drive of entropy could make it favorable for it to split. Then it would be at equilibrium.
|
|
|
DraconicAcid
International Hazard
Posts: 4279
Registered: 1-2-2013
Location: The tiniest college campus ever....
Member Is Offline
Mood: Semi-victorious.
|
|
| Quote: Originally posted by Neal |
Here's something to make it weirder. NaCl has a melting point, and bp.
This temperature is above both.
So, at this temp NaCl wouldn't exist as a solid. Making it quite contradictory to be at equilibrium?
Ironically, my text does have values for NaCl liquid and gas. As well as Na for liquid and gas. And this is above Na's mp and bp too. So I could run 2
versions of this in liquid and gas phase. Weird. |
That's not really weird. The values we use are for 298 K, so our calculations are only good for temperatures close to that.
Above the melting point of sodium, our calculations are useless, because we don't have solid sodium. We'd have to recalculate the things with liquid
sodium instead (and at higher temperatures, gaseous sodium, and liquid NaCl).
Now, this doesn't mean that this reaction can never be at equilibrium at reasonable temperatures. You would just have infinitesimal quantities of
sodium and chlorine coexisting with the salt.
Please remember: "Filtrate" is not a verb.
Write up your lab reports the way your instructor wants them, not the way your ex-instructor wants them.
|
|
|
Neal
Hazard to Others
Posts: 116
Registered: 24-12-2021
Location: Chicago, IL, USA.
Member Is Offline
|
|
Does Na "liquid or gas" can react with Cl2 to get NaCl liquid or gas?
Otherwise, I feel no point in doing those calculations with liquid/gas.
So has anyone ever got temps below absolute zero? I'm thinking now it isn't possible...
|
|
|
DraconicAcid
International Hazard
Posts: 4279
Registered: 1-2-2013
Location: The tiniest college campus ever....
Member Is Offline
Mood: Semi-victorious.
|
|
Yes, liquid sodium will also react with chlorine to give sodium chloride. I suspect gaseous sodium would also react.
You cannot have a temperature below 0 K. That would imply that the particles had negative amounts of kinetic energy.
Please remember: "Filtrate" is not a verb.
Write up your lab reports the way your instructor wants them, not the way your ex-instructor wants them.
|
|
|
metalresearcher
National Hazard
Posts: 731
Registered: 7-9-2010
Member Is Offline
Mood: Reactive
|
|
Well, *any* compound will disintegrate above a few thousand K.
I think, even CO2 gets unstable above 1000 C (decomposing to CO and O2 ?), water above 2000 C.
At coolest (M class, such as Betelgeuse) star temperatures, only simple compounds like CO, TiO still exist.
|
|
|
Neal
Hazard to Others
Posts: 116
Registered: 24-12-2021
Location: Chicago, IL, USA.
Member Is Offline
|
|
| Quote: Originally posted by DraconicAcid | It looks like you're dividing the enthalpy of formation of liquid water by its absolute entropy. You have to use reaction enthalpies and reaction
entropies, or you're calculating nonsense.
My handy textbook doesn't have ice in it, but it does have steam. So let's look at H2O(l) <==> H2O(g)
Enthalpy of rxn = products - reactants = -241.83 kJ/molk - -285.83 kJ/mol = +44.00 kJ/mol (deltaHrxn)
Entropy of rxn = products - reactants = 188.84 J/molK - 69.95 J/moK = + 118.89 J/molK (deltaSrxn)
T = 44 000 J/mol / 118.89 J/molK = 370.1 K (96.9 C, because enthalpy and entropy of rxn isn't entirely independent of temperature)
Does that make more sense? |
97 C, I'm so glad the result was below the bp of water and not above. Since bp is so subjective to me, as you can have steam exist at room temperature
far below the bp, due to something called vapor pressure.
So for ice and water, I was wondering if the calculated would actually be above or below the freezing point, if it isn't on there exactly.
Wikipedia has it for ice.
https://en.wikipedia.org/wiki/Water_(data_page)#Thermodynamic_properties
Scroll to solid properties.
H = -293 - -286 = -7
S = .041 - .070 = -.029
T = -7/-.029 = 241 K, = -32 C.
-32 C a lot farther from 0 C as 97 C to 100 C.
Here's the thing. Our text doesn't have the enthalpy of formation for ice, but it does have for steam.
Well ice can't exist at 25 C..., but steam can. So the heat of formation for steam, that we used, are for room temperature, not 100 C, so that affects
calculations?
It won't affect any Na + 1/2 Cl -> NaCl since they are all consistent at 25 C, but using any
H2O solid/liquid <-> H2O liquid/gas
is inherently flawed if we're only looking at values at room-temperature?
In any event, Wikipedia didn't cite their sources, having all 3 states of water, but ice can't exist at room temperature unless different pressure.
[Edited on 13-8-2023 by Neal]
|
|
|
Rainwater
National Hazard
Posts: 800
Registered: 22-12-2021
Member Is Offline
Mood: indisposition to activity
|
|
Try labeling each value as you write them down, i think your getting your varables mixed up.(see edit)
| Code: | Formula State Enthalpy (kJ/mol) Entropy (J mol/K)
H2O (g) -241.818464 188.715136
H2O (l) -285.82996 69.91464
H2O (s) -291.83996 47.91464 |
data taken from https://www.drjez.com/uco/ChemTools/Standard%20Thermodynamic... March 6 2022
Runnig the math I get these tempatures
H2Osolid = H2Oliquid
| Code: | T = 273.15 Kelvin
ΔH 6.0100 kJ/mol
ΔS 22.0000 J mol/K
ΔG 0.0007 kJ/mol
Keq= 0.999691809
|
H2Oliquid = H2OGas
| Code: | T = 370.47 Kelvin
ΔH 44.0115 kJ/mol
ΔS 118.8005 J mol/K
ΔG -0.0005 kJ/mol
Keq= 1.000170059
|
[Edited on 13-8-2023 by Rainwater]
Running the numbers off Wikipedia i get the same values.
That's interesting, must be a flaw in the data somewhere
[Edited on 13-8-2023 by Rainwater]
"You can't do that" - challenge accepted
|
|
|
| Pages:
1
2
3 |
![[*]](images/xpblue/default_icon.gif){kind=icon}
