Sciencemadness Discussion Board
Not logged in [Login ]
Go To Bottom

Printable Version  
Author: Subject: diacetyl peroxide formation
symboom
International Hazard
*****




Posts: 1143
Registered: 11-11-2010
Location: Wrongplanet
Member Is Offline

Mood: Doing science while it is still legal since 2010

[*] posted on 29-1-2012 at 02:46
diacetyl peroxide formation


ive used a mix of 5% vinegar and 3% peroxide to a piece of zinc to see if i could form zinc peroxide or is this diacetyl peroxide forming and i have a precipitate of some white powder
View user's profile View All Posts By User
Adas
National Hazard
****




Posts: 711
Registered: 21-9-2011
Location: Slovakia
Member Is Offline

Mood: Sensitive to shock and friction

[*] posted on 29-1-2012 at 11:21


This must be zinc peroxide. Diacetyl peroxide does not form so easily and it would react with organics in vinegar.



Rest In Pieces!
View user's profile Visit user's homepage View All Posts By User
symboom
International Hazard
*****




Posts: 1143
Registered: 11-11-2010
Location: Wrongplanet
Member Is Offline

Mood: Doing science while it is still legal since 2010

[*] posted on 29-1-2012 at 12:03


though organic what do you mean
white vinegar is made chemically. what i used
brown vinegar made from bacteria is what you must mean
View user's profile View All Posts By User
kavu
Hazard to Others
***




Posts: 207
Registered: 11-9-2011
Location: Scandinavia
Member Is Offline

Mood: To understand is to synthesize

[*] posted on 29-1-2012 at 12:29


Zinc dissolves in acetic acid to give ZnĀ²⁺ ions. A commonly known procedure for synthesis of zinc peroxide is to react a zinc salt with an aqueous solution of hydrogen peroxide. You have not given any information on the quantities used, so I'd say that the ppt contains mostly ZnO2 and ZnO alongside with a cocktail of other zinc compounds.

A procedure for zinc peroxide is described for example in the recent article N. Singh, S. Mittala, K. Sood, P. Gupta CONTROLLING THE FLOW OF NASCENT OXYGEN USING HYDROGEN PEROXIDE RESULTS IN CONTROLLING THE SYNTHESIS OF ZnO/ZnO2, Chalcogenide Letters, Vol. 7, No. 4, April 2010, p. 275-281

Synthesis of diacetyl peroxide, an extremely dangerous thing to do, calls for more concentrated acetic acid or acetic acid derivatives.

[Edited on 29-1-2012 by kavu]
View user's profile View All Posts By User
Adas
National Hazard
****




Posts: 711
Registered: 21-9-2011
Location: Slovakia
Member Is Offline

Mood: Sensitive to shock and friction

[*] posted on 29-1-2012 at 13:30


Quote: Originally posted by kavu  
Synthesis of diacetyl peroxide, an extremely dangerous thing to do, calls for more concentrated acetic acid or acetic acid derivatives.


Yes, it can be made of acetyl chloride and BaO2, for example. If information given about DAP by Wiki is not exaggerated, it is really extremely dangerous stuff.




Rest In Pieces!
View user's profile Visit user's homepage View All Posts By User
symboom
International Hazard
*****




Posts: 1143
Registered: 11-11-2010
Location: Wrongplanet
Member Is Offline

Mood: Doing science while it is still legal since 2010

[*] posted on 31-1-2012 at 09:35


yeah i guess i could have used my glacial acidic acid (from distilling it from sodium acetate with sulfuric acid.) but i was afraid of actyl peroxide forming so i just used sore bought stuff.

zinc peroxide white to yellow powder seems right what i have.
any experiments to prove zinc peroxide formation

burning the filter paper it is on with it.
any suggestions?
View user's profile View All Posts By User
kotze
Harmless
*




Posts: 5
Registered: 22-1-2012
Member Is Offline

Mood: No Mood

[*] posted on 31-1-2012 at 10:16


Zinc peroxide vigorously reacts with sulfur when heated and forms shock-sensitive mixtures with it. I doubt you have much ZnO2 in your precipate because of low H2O2 concentration. ZnO2 is best made by boiling ZnO with >30% H2O2 until dry. A dark yellow to orange powder is thus obtained which is somewhat delicate to store - the slightest presence of moisture will cause the container to blast open.
View user's profile View All Posts By User
kavu
Hazard to Others
***




Posts: 207
Registered: 11-9-2011
Location: Scandinavia
Member Is Offline

Mood: To understand is to synthesize

[*] posted on 31-1-2012 at 10:19


You can determine the approximate composition by thermal decomposition of zinc peroxide to form zinc oxide. Weight a known amount of the product and heat it. Cool it in a dessicator, weigh and repeat untill you get a constant weight. From the weight difference you can calculate the approximate amount of zinc peroxide in your sample.
View user's profile View All Posts By User
MrHomeScientist
International Hazard
*****




Posts: 1806
Registered: 24-10-2010
Location: Flerovium
Member Is Offline

Mood: No Mood

[*] posted on 31-1-2012 at 11:02


Quote: Originally posted by symboom  
though organic what do you mean
white vinegar is made chemically. what i used
brown vinegar made from bacteria is what you must mean

Organic chemistry is anything dealing with carbon-based molecules, regardless of how they were made. Acetic acid is classified as an organic acid, whether it came from a flask or from living things.
View user's profile Visit user's homepage View All Posts By User
Adas
National Hazard
****




Posts: 711
Registered: 21-9-2011
Location: Slovakia
Member Is Offline

Mood: Sensitive to shock and friction

[*] posted on 31-1-2012 at 13:05


Quote: Originally posted by kotze  
ZnO2 is best made by boiling ZnO with >30% H2O2 until dry.


Boiling H2O2? Really?

Quote: Originally posted by kotze  
ZnO2 is somewhat delicate to store - the slightest presence of moisture will cause the container to blast open.


Isn't moisture everywhere? Can you post any refference?




Rest In Pieces!
View user's profile Visit user's homepage View All Posts By User
kotze
Harmless
*




Posts: 5
Registered: 22-1-2012
Member Is Offline

Mood: No Mood

[*] posted on 2-2-2012 at 10:18


Yes you need to boil it down. ZnO2 is relatively temperature-stable and fixes most of the O-O before it decomposes. I made some myself years ago, from ZnO, H2O2 and a little NH3. After filling it into a tight glass bottle it shattered the bottle, scattering glass and ZnO2 everywhere. The bottle was washed shortly before and I probably didn't get it fully dry. ZnO2 is somewhat of a suspicious substance, I remember it crackled and flashed with a blue flame when thrown onto a red-hot heating plate.
View user's profile View All Posts By User
Adas
National Hazard
****




Posts: 711
Registered: 21-9-2011
Location: Slovakia
Member Is Offline

Mood: Sensitive to shock and friction

[*] posted on 2-2-2012 at 12:30


That seems very dangerous. But there is no such info on Wikipedia..



Rest In Pieces!
View user's profile Visit user's homepage View All Posts By User
entropy51
Gone, but not forgotten
*****




Posts: 1612
Registered: 30-5-2009
Member Is Offline

Mood: Fissile

[*] posted on 2-2-2012 at 17:22


Quote: Originally posted by Adas  
But there is no such info on Wikipedia..
Well that clinches it, doesn't it?
View user's profile View All Posts By User
Vikascoder
Hazard to Others
***




Posts: 309
Registered: 28-1-2012
Member Is Offline

Mood: No Mood

[*] posted on 2-2-2012 at 21:54


But if you will heat the hydrogen peroxide there is a risk of detonation if some impurities are present
View user's profile View All Posts By User

  Go To Top