Difference between revisions of "Hydrogen sulfide"

From Sciencemadness Wiki
Jump to: navigation, search
 
(One intermediate revision by the same user not shown)
Line 62: Line 62:
 
| MeltingPt_notes =  
 
| MeltingPt_notes =  
 
| Odor = Rotten eggs (low conc.)<br>Odorless (high conc.)
 
| Odor = Rotten eggs (low conc.)<br>Odorless (high conc.)
| pKa = 7.0
+
| pKa = 6.9-7.0
 
| pKb = 12.9
 
| pKb = 12.9
| Solubility = 4 g/L (at 20 °C)
+
| Solubility = 0.4 g/100 ml (at 20 °C)
 
| SolubleOther = Soluble in [[acetone]], [[dimethyl sulfoxide]], [[N-Methyl-2-pyrrolidone]], [[Tetrahydrofuran|THF]]
 
| SolubleOther = Soluble in [[acetone]], [[dimethyl sulfoxide]], [[N-Methyl-2-pyrrolidone]], [[Tetrahydrofuran|THF]]
 
| Solvent =  
 
| Solvent =  
Line 105: Line 105:
 
| OtherFunction =  
 
| OtherFunction =  
 
| OtherFunction_label =  
 
| OtherFunction_label =  
| OtherCompounds = [[Water]]
+
| OtherCompounds = [[Water]]<br>[[Hydrogen selenide]]<br>[[Hydrogen telluride]]
 
   }}
 
   }}
 
}}
 
}}
Line 112: Line 112:
 
==Properties==
 
==Properties==
 
===Chemical===
 
===Chemical===
Hydrogen sulfide is a [[reducer|reducing agent]], so finds several uses, but use is often limited due to its toxicity. Most of the time however, a replacement is looked for simply because of the very off-putting and toxic nature of this gas.
+
Hydrogen sulfide is a [[reducer|reducing agent]], so finds several uses, but use is often limited due to its extremely strong unpleasant odor and toxicity. Most of the time however, a replacement is looked for simply because of the very off-putting and toxic nature of this gas, even with proper equipment.
  
 
[[Sodium hypochlorite]] will react with the gas to produce [[sodium chloride]], water and sulfur. Because of the docile nature of the products, bleach can be used to neutralize the toxic gas.
 
[[Sodium hypochlorite]] will react with the gas to produce [[sodium chloride]], water and sulfur. Because of the docile nature of the products, bleach can be used to neutralize the toxic gas.
  
Hydrogen sulfide will react with [[sulfur dioxide]] to produce elemental [[sulfur]] and water. Hydrogen sulfide is also highly flammable in the presence of oxygen, with it burning to produce sulfur dioxide and water.
+
: H<sub>2</sub>S + NaClO → NaCl + H<sub>2</sub>O + S
 +
 
 +
Hydrogen sulfide will react with [[sulfur dioxide]] to produce elemental [[sulfur]] and water.
 +
 
 +
: 2 H<sub>2</sub>S + SO<sub>2</sub> → 3 S + 2 H<sub>2</sub>O
 +
 
 +
Hydrogen sulfide is also highly flammable in the presence of oxygen, with it burning to produce sulfur dioxide and water.
 +
 
 +
: 2 H<sub>2</sub>S + 3 O<sub>2</sub> → 2 SO<sub>2</sub> + 2 H<sub>2</sub>O
  
 
A common detection method for the sulfide is through the use of [[lead(II) acetate]] paper. A small amount of hydrogen sulfide will quickly turn the clear solution of lead acetate a grey colour with the formation of insoluble [[lead(II) sulfide]].
 
A common detection method for the sulfide is through the use of [[lead(II) acetate]] paper. A small amount of hydrogen sulfide will quickly turn the clear solution of lead acetate a grey colour with the formation of insoluble [[lead(II) sulfide]].
Line 122: Line 130:
 
The black tarnish on [[silver]] often appears due to [[silver sulfide]] on the surface, and it is only made from the reaction of small amounts of atmospheric hydrogen sulfide reacting with the silver metal. Silver should be kept outside the lab to prevent this tarnish if hydrogen sulfide may be present.
 
The black tarnish on [[silver]] often appears due to [[silver sulfide]] on the surface, and it is only made from the reaction of small amounts of atmospheric hydrogen sulfide reacting with the silver metal. Silver should be kept outside the lab to prevent this tarnish if hydrogen sulfide may be present.
  
When dissolved in water, hydrogen sulfide acts like a weak acid.
+
When dissolved in water, hydrogen sulfide acts like a weak acid (p''K''<sub>a</sub> = 6.9 in 0.01–0.1 mol/litre solutions at 18 °C), giving the hydrosulfide ion {{chem|HS|-}} (also written {{chem|SH|-}}). Hydrogen sulfide and its solutions are colorless. When exposed to air, it slowly oxidizes to form elemental sulfur, which is not soluble in water. The [[sulfide]] anion {{chem|S|2-}} is not formed in aqueous solution.
  
 
===Physical===
 
===Physical===
Hydrogen sulfide is a colorless gas with a strong unpleasant smell. It has a density at standard conditions of 1.363 g/dm<sup>3</sup>. Its melting point is −82 °C and boils at −60 °C. It has a solubility in water of 4 g/l. It is also soluble in [[acetone]], [[chlorobenzene]], [[methanol]] and THF, but poorly soluble in [[ethylene glycol]].<ref>http://pubs.acs.org/doi/abs/10.1021/je00031a019</ref>
+
Hydrogen sulfide is a colorless gas with a strong unpleasant smell. It has a density at standard conditions of 1.363 g/dm<sup>3</sup>. Its melting point is −82 °C and boils at −60 °C. It has a solubility in water of 4 g/l. It is also soluble in [[acetone]], [[chlorobenzene]], [[methanol]] and [[Tetrahydrofuran|THF]], but poorly soluble in [[ethylene glycol]].<ref>http://pubs.acs.org/doi/abs/10.1021/je00031a019</ref>
  
 
==Availability==
 
==Availability==
 
Hydrogen sulfide is difficult to acquire due to its strong smell and hazards. It's best to make it yourself.
 
Hydrogen sulfide is difficult to acquire due to its strong smell and hazards. It's best to make it yourself.
 +
 +
Work with this compound is extremely hazardous and if possible, a substitute should be used instead.
  
 
==Preparation==
 
==Preparation==

Latest revision as of 16:48, 1 September 2020

Hydrogen sulfide
Names
IUPAC name
Hydrogen sulfide
Preferred IUPAC name
Hydrogen sulfide
Systematic IUPAC name
Hydrogen sulfide
Other names
Dihydrogen monosulfide
Dihydrogen sulfide
Hydrosulfuric acid
Hydrothionic acid
Sewer gas
Sulfhydric acid
Sulfane
Sulfur hydride
Sulfurated hydrogen
Sulfureted hydrogen
Sulfuretted hydrogen
Properties
H2S
Molar mass 34.08 g/mol
Appearance Colorless gas
Odor Rotten eggs (low conc.)
Odorless (high conc.)
Density 1.363 kg/m3
Melting point −82 °C (−116 °F; 191 K)
Boiling point −60 °C (−76 °F; 213 K)
0.4 g/100 ml (at 20 °C)
Solubility Soluble in acetone, dimethyl sulfoxide, N-Methyl-2-pyrrolidone, THF
Vapor pressure 1740 kPa (at 21 °C)
Acidity (pKa) 6.9-7.0
Thermochemistry
206 J mol−1·K−1
−21 kJ/mol
Hazards
Safety data sheet Sigma-Aldrich
Flash point −82.4 °C (−116.3 °F; 190.8 K)
Lethal dose or concentration (LD, LC):
713 ppm (rat, 1 hr)
673 ppm (mouse, 1 hr)
634 ppm (mouse, 1 hr)
444 ppm (rat, 4 hr)
Related compounds
Related compounds
Water
Hydrogen selenide
Hydrogen telluride
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
Infobox references

Hydrogen sulfide or H2S, is a highly toxic gas with a characteristic foul odor, often recognized as the smell of rotting eggs.

Properties

Chemical

Hydrogen sulfide is a reducing agent, so finds several uses, but use is often limited due to its extremely strong unpleasant odor and toxicity. Most of the time however, a replacement is looked for simply because of the very off-putting and toxic nature of this gas, even with proper equipment.

Sodium hypochlorite will react with the gas to produce sodium chloride, water and sulfur. Because of the docile nature of the products, bleach can be used to neutralize the toxic gas.

H2S + NaClO → NaCl + H2O + S

Hydrogen sulfide will react with sulfur dioxide to produce elemental sulfur and water.

2 H2S + SO2 → 3 S + 2 H2O

Hydrogen sulfide is also highly flammable in the presence of oxygen, with it burning to produce sulfur dioxide and water.

2 H2S + 3 O2 → 2 SO2 + 2 H2O

A common detection method for the sulfide is through the use of lead(II) acetate paper. A small amount of hydrogen sulfide will quickly turn the clear solution of lead acetate a grey colour with the formation of insoluble lead(II) sulfide.

The black tarnish on silver often appears due to silver sulfide on the surface, and it is only made from the reaction of small amounts of atmospheric hydrogen sulfide reacting with the silver metal. Silver should be kept outside the lab to prevent this tarnish if hydrogen sulfide may be present.

When dissolved in water, hydrogen sulfide acts like a weak acid (pKa = 6.9 in 0.01–0.1 mol/litre solutions at 18 °C), giving the hydrosulfide ion HS
(also written SH
). Hydrogen sulfide and its solutions are colorless. When exposed to air, it slowly oxidizes to form elemental sulfur, which is not soluble in water. The sulfide anion S2−
is not formed in aqueous solution.

Physical

Hydrogen sulfide is a colorless gas with a strong unpleasant smell. It has a density at standard conditions of 1.363 g/dm3. Its melting point is −82 °C and boils at −60 °C. It has a solubility in water of 4 g/l. It is also soluble in acetone, chlorobenzene, methanol and THF, but poorly soluble in ethylene glycol.[1]

Availability

Hydrogen sulfide is difficult to acquire due to its strong smell and hazards. It's best to make it yourself.

Work with this compound is extremely hazardous and if possible, a substitute should be used instead.

Preparation

Preparation of hydrogen sulfide is not for those who don't have good chemistry experience. Since the gas becomes odorless and highly toxic at high concentrations, work should never be performed in closed places without proper ventilation and absolutely have a breathing mask or apparatus.

An acid acting on a metal sulfide is one way of generating the gas. For small amounts, iron sulfide is an option as lumps of the FeS2 mineral pyrite is always sold in gemstone/mineral stores. Larger amounts can be made from the hydrolysis of aluminium sulfide, which in turn is made by the almost thermite like combustion reaction between elemental sulfur and aluminium. Another method involves synthesis of ferrous sulfide from elemental iron and sulfur and treating it with acids. The disadvantage of this method is that ferrous sulfide, being an insoluble melt, tends to "goat" test tubes.

Projects

Handling

Safety

This gas is flammable and ideal mixes of O2 and H2S are listed as explosive.

Hydrogen sulfide is very toxic, but the reason it is still able to be used is that it is detectable, via its foul odor, in very low doses, below the extremely harmful level. The foul odor of the gas is a natural deterrent. An amateur chemist is far more likely to be caught off guard by a poisonous gas that either has no odor or has a rather pleasant smell. It should be noted, however, that the smell of hydrogen sulfide is among the most likely substances to alert neighbors or authorities of what you are doing, and the smell may even be mistaken for a gas leak, which could cause serious legal problems. Hydrogen sulfide can be lead into a cold solution containing a base to neutralize a quantity of it, reducing both the smell and chance of injury.

Though this gas is both useful and generally not regarded as an extreme danger, there is, however, a point where breathing in this gas can cause serious harm. A property of H2S is that is can temporarily deaden a person's sense of smell, a sickening effect that a few Sciencemadness members have had personal experiences with. If you are in an area with a strong smell of hydrogen sulfide, and then that strong smell suddenly disappears for no apparent reason, immediately leave the area. At the concentration where this occurs, the gas is potentially deadly, with a toxicity not very far from the infamous hydrogen cyanide, not to mention undetectable. Safety plans should be in order during any experiment which makes use of hydrogen sulfide, including a way to quickly leave the room/area. In the event of large amounts of the gas being released inside, large amounts of steam help to insure the oxidation of hydrogen sulfide to less harmful chemicals, and open containers of base can neutralize it as well.

Frequently find time during working with this gas to get some fresh air, even if you are certain you are not breathing any in.

In case of hydrogen sulfide poisoning, the patient should immediately leave the contaminated room (or be carried from there) and given access to outside air. In case of severe poisoning, the patient should immediately receive medical attention. If no medical attention is available, the patient should be given pure oxygen to breathe. Using methylene blue, a general antidote against blood agents that mess with hemoglobin or cytochrome oxidase, can also be recommended: the dosage is 50-100 ml of 1% solution intravenously. Nitrites, such as an isopropyl nitrite inhalation, also work as antidotes. Do not use both methylene blue and nitrite.

Storage

Storage of hydrogen sulfide presents great difficulties, as even the slightest leak will create a foul smelling environment. Hydrogen sulfide tanks and solutions are best stored in closed bottles, in a special cabinet containing scrubbers capable of removing hydrogen sulfide.

Disposal

Since the gas has a strong unpleasant smell, it's best to neutralize it first. There are several way to neutralize hydrogen sulfide.

Burning it will release sulfur dioxide, which has a less disagreeable odor, and in contact with hydrogen sulfide will be reduced to elemental sulfur. Bubbling hydrogen sulfide will result in sodium hydrosulfide, that will slowly hydrolyze to release hydrogen sulfide back in the air.

Hydrogen peroxide will reduce hydrogen sulfide to elemental sulfur or oxidize it to sulfuric acid in an alkaline environment, that can be easily neutralized.[2]

References

  1. http://pubs.acs.org/doi/abs/10.1021/je00031a019
  2. http://antoine.frostburg.edu/chem/senese/101/redox/faq/h2o2-h2s-so2.shtml

Relevant Sciencemadness threads