Difference between revisions of "Methyl ethyl ketone"

From Sciencemadness Wiki
Jump to: navigation, search
(Availability)
(Preparation)
Line 15: Line 15:
  
 
==Preparation==
 
==Preparation==
Butanone is prepared industrially through the oxidative dehydrogenation of [[butanol|2-butanol]], but for use as a reagent or solvent is typically just purchased.
+
Butanone is prepared industrially through the oxidative dehydrogenation of [[2-butanol]], but for use as a reagent or solvent is typically just purchased, this assuming it's readily available.
 +
 
 +
Oxidizing 2-butanol with copper(II) permanganate in dichloromethane for 10 minutes is noted to convert virtually all sec-butanol into MEK, with very little side products.<ref>[http://pubs.acs.org/doi/abs/10.1021/jo00135a024 N.A. Noureldin, Donald G. Lee, Journal of Organic Chemistry, Vol. 47 (14), (1982), p. 2790 - 2792]</ref> Iron(III) nitrate on kieselguhr can also be used instead of permanganate, though the reaction requires heating and takes around 90 minutes to complete, giving a yield of 95%.<ref>[http://www.tandfonline.com/doi/full/10.1080/00397910600775309#abstract Ji-Dong Lou, Long-Hua Zhu Yi-Chun Ma, Li Li, Synthetic Communications, Vol. 36 (20), 2006, p. 3061 -
 +
3064]</ref>
 +
 
 +
Oxidizing n-butane over complex catalysts will also yield MEK and some side products.<ref>http://www.google.com/patents/US20140135532?cl=en17</ref>
 +
 
 +
Another route involves the oxidation of butane with hydrogen bromide, oxygen at 180 °C.<ref>[Nawrocki et al., Industrial and Engineering Chemistry, vol. 41, (1949), p. 2607 http://pubs.acs.org/doi/abs/10.1021/ie50479a049]</ref><ref>http://www.google.com/patents/US2452326</ref>
 +
 
 +
A process described by F. Bauer involves the reaction of conc. sulfuric acid with 3-hydroxybutanal at 190 °C yields butanone. As 3-hydroxybutanal can be obtained through the aldol condensation of [[acetaldehyde]] in the presence of a base, this reaction is less complex that other processes.<ref>[http://link.springer.com/article/10.1007/BF01540188 Bauer; Monatshefte fuer Chemie; vol. 25; (1904); p. 4]</ref>
 +
 
 +
The pyrolysis of anhydrous calcium butyrate with calcium acetate at 400 °C in an oxygen-free environment will yield some butanone.<ref>[http://link.springer.com/article/10.1007/BF01518614 Suida; Poell; Monatshefte fuer Chemie; vol. 48; (1927); p. 169, 179]</ref><ref>Angewandte Chemie; vol. 40; (1927); p. 506</ref> A similar reaction occurs when calcium butyrate is replaced with calcium propionate.<ref>[http://onlinelibrary.wiley.com/doi/10.1002/cber.18830160217/abstract Julian Schramm, Chemische Berichte, vol. 16, (1883), p. 1582]</ref>
 +
 
 +
Reaction of ethanol with acetone in the presence of a catalyst made from aluminum oxide, molybdenum(VI) oxide and [[copper(II) oxide]], at 230 °C will yield butanone.<ref>[http://www.google.co.ve/patents/US2064254 US2064254]</ref><ref>FR741385</ref>
 +
 
 +
Adding methyl iodide to acetone in the presence of potassium hydroxide yields butanone.<ref>[http://onlinelibrary.wiley.com/doi/10.1002/jlac.19003100306/abstract J. U. Nef, Justus Liebigs Annalen der Chemie, vol. 310, (1900), p. 323]</ref>
 +
 
 +
An interesting process involves the oxidation of [[isobutanol]] using a ruthenium complex catalyst, more specifically [RuCl(PPh<sub>3</sub>)(L)<sub>2</sub>], in the presence of 4-methylmorpholine N-oxide. The reaction takes place in dichloromethane for 3 h, giving an yield of 76%.<ref>[http://link.springer.com/article/10.2478/s11532-010-0045-8 Thilagavathi, Natarajan; Jayabalakrishnan, Chinnasamy, Central European Journal of Chemistry, vol. 8, Issue 4, (2010), p. 842 - 851]</ref> A less expensive process replaces the ruthenium catalyst with quinolinium fluorochromate (which is made by reacting chromium trioxide with 40% hydrofluoric acid and then reacted with quinoline), which is supported on silica gel. Just like the previous process, the reaction takes place in dichloromethane and produces heat. The reaction runs for 4 hours, giving a yield of 58%.<ref>[http://nopr.niscair.res.in/bitstream/123456789/21274/1/IJCB%2043B%285%29%20936-946.pdf Rajkumar, G Abraham; Sivamurugan, V;Arabindoo, Banumathi; Murugesan, V; Indian Journal of Chemistry: Sec B- Organic Chemistry including Medicinal Chemistry, Mild and selective oxidation of alcohols and deoximation of oximes over supported quinolinium fluorochromate, Vol.43B (05) May 2004, p. 936-946]</ref> While isobutanol is readily available, the main disadvantage of this route is that they require expensive catalysts.
 +
 
 +
An interesting process developed involves the electrolytic oxidation of lignin at a lead cathode in a sodium hydroxide solution with a current density of 2 A per 100 cm<sup>2</sup>. While many lignin sources can be used, the best yield was from butanol lignin from western hemlock. The average yield is 23.3% butanone, with the rest being acetone (15.2%), acetic acid (15.1%), while other compounds are below 10%. While the yields are not great, lignin can be cheaply extracted from plants.<ref>[Brooks Bailey, Electrolytic Oxidation of Lignin,Journal of the American Chemical Society, vol. 68, (1946), p. 446 http://pubs.acs.org/doi/abs/10.1021/ja01207a029]</ref>
 +
 
 +
Pyrolysis of cellulose in the presence of air at temperatures between 400 - 600 °C will yield butanone, 2-methylfuran, styrene, toluene. The yields aren't great, but cellulose is cheaply available.<ref>[http://pubs.acs.org/doi/abs/10.1021/es980796q Park, Byung-Ik; Bozzelli, Joseph W.; Booty, Michael R.; Bernhard, Mary J.; Mesuere, Karel; Pettigrew, Charles A.; Shi, Ji-Chun; Simonich, Staci L.; Environmental Science and Technology, vol. 33, Issue 15, (1999), p. 2584 - 2592]</ref>
 +
 
 +
Reaction of acetone with diazomethane in water at 0 °C will yield butanone. [[Lithium chloride]], [[formamide]] or [[butanol]] can also be added to improve the process.<ref>Meerwein; Burneleit; Chemische Berichte; vol. 61; (1928); p. 1845</ref><ref>Meerwein; Bersin; Burneleit; Chemische Berichte; vol. 62; (1929); p. 1006</ref>
  
 
==Projects==
 
==Projects==

Revision as of 21:09, 18 January 2016

Structure of methyl ethyl ketone.

Butanone, most commonly known as methyl ethyl ketone or simply MEK, is an organic compound commonly used as a polar solvent and lab reagent. This clear liquid is an example of a ketone, and is similar to acetone.

Properties

Chemical

Methyl ethyl ketone is a notable reagent in the synthesis of hydrazine sulfate. Similarly to acetone, methyl ethyl ketone is used to produce its own organic peroxide, MEKP.

Physical

Methyl ethyl ketone is a clear, colorless fluid that is less viscous than water and has a somewhat sharp, sweet odor characteristic of most ketones, with some describing it as similar to butterscotch. Compared to acetone it is much less volatile and is less soluble in water(approximately 27.5g/100mL at room temperature). It is a useful solvent for the extraction of gums and oils from plants and for cleaning residues off of metal and glass, hence why it is often found as a cleaner or a component of lacquers.

Availability

Methyl ethyl ketone can be purchased at some hardware stores as simply "MEK". It is also a component of some paint thinners and degreasers. Some hobby stores, such as those that carry modelling kits made of polystyrene or acrylic, carry methyl ethyl ketone as a plastic welding solvent, but this is usually more expensive than finding it at a hardware store.

The solvent in certain paint thinner pastes contain a mixture of methyl ethyl ketone and butyl acetate. Due to the large difference between their boiling point (79.64 °C and 126.1 °C respectively), MEK can be extracted through a simple distillation, though better purity can be achieved using fractional distillation.

Preparation

Butanone is prepared industrially through the oxidative dehydrogenation of 2-butanol, but for use as a reagent or solvent is typically just purchased, this assuming it's readily available.

Oxidizing 2-butanol with copper(II) permanganate in dichloromethane for 10 minutes is noted to convert virtually all sec-butanol into MEK, with very little side products.[1] Iron(III) nitrate on kieselguhr can also be used instead of permanganate, though the reaction requires heating and takes around 90 minutes to complete, giving a yield of 95%.[2]

Oxidizing n-butane over complex catalysts will also yield MEK and some side products.[3]

Another route involves the oxidation of butane with hydrogen bromide, oxygen at 180 °C.[4][5]

A process described by F. Bauer involves the reaction of conc. sulfuric acid with 3-hydroxybutanal at 190 °C yields butanone. As 3-hydroxybutanal can be obtained through the aldol condensation of acetaldehyde in the presence of a base, this reaction is less complex that other processes.[6]

The pyrolysis of anhydrous calcium butyrate with calcium acetate at 400 °C in an oxygen-free environment will yield some butanone.[7][8] A similar reaction occurs when calcium butyrate is replaced with calcium propionate.[9]

Reaction of ethanol with acetone in the presence of a catalyst made from aluminum oxide, molybdenum(VI) oxide and copper(II) oxide, at 230 °C will yield butanone.[10][11]

Adding methyl iodide to acetone in the presence of potassium hydroxide yields butanone.[12]

An interesting process involves the oxidation of isobutanol using a ruthenium complex catalyst, more specifically [RuCl(PPh3)(L)2], in the presence of 4-methylmorpholine N-oxide. The reaction takes place in dichloromethane for 3 h, giving an yield of 76%.[13] A less expensive process replaces the ruthenium catalyst with quinolinium fluorochromate (which is made by reacting chromium trioxide with 40% hydrofluoric acid and then reacted with quinoline), which is supported on silica gel. Just like the previous process, the reaction takes place in dichloromethane and produces heat. The reaction runs for 4 hours, giving a yield of 58%.[14] While isobutanol is readily available, the main disadvantage of this route is that they require expensive catalysts.

An interesting process developed involves the electrolytic oxidation of lignin at a lead cathode in a sodium hydroxide solution with a current density of 2 A per 100 cm2. While many lignin sources can be used, the best yield was from butanol lignin from western hemlock. The average yield is 23.3% butanone, with the rest being acetone (15.2%), acetic acid (15.1%), while other compounds are below 10%. While the yields are not great, lignin can be cheaply extracted from plants.[15]

Pyrolysis of cellulose in the presence of air at temperatures between 400 - 600 °C will yield butanone, 2-methylfuran, styrene, toluene. The yields aren't great, but cellulose is cheaply available.[16]

Reaction of acetone with diazomethane in water at 0 °C will yield butanone. Lithium chloride, formamide or butanol can also be added to improve the process.[17][18]

Projects

Handling

Safety

Methyl ethyl ketone is a skin and respiratory irritant. At very high concentrations it poses health problems, may cause birth defects in animals.

MEK is highly flammable and should not be handled near any open flame or strong oxidizing agents.

Storage

MEK should be stored in a closed bottle, in a dark place.

Disposal

MEK can be safely burned.

References

  1. N.A. Noureldin, Donald G. Lee, Journal of Organic Chemistry, Vol. 47 (14), (1982), p. 2790 - 2792
  2. [http://www.tandfonline.com/doi/full/10.1080/00397910600775309#abstract Ji-Dong Lou, Long-Hua Zhu Yi-Chun Ma, Li Li, Synthetic Communications, Vol. 36 (20), 2006, p. 3061 - 3064]
  3. http://www.google.com/patents/US20140135532?cl=en17
  4. [Nawrocki et al., Industrial and Engineering Chemistry, vol. 41, (1949), p. 2607 http://pubs.acs.org/doi/abs/10.1021/ie50479a049]
  5. http://www.google.com/patents/US2452326
  6. Bauer; Monatshefte fuer Chemie; vol. 25; (1904); p. 4
  7. Suida; Poell; Monatshefte fuer Chemie; vol. 48; (1927); p. 169, 179
  8. Angewandte Chemie; vol. 40; (1927); p. 506
  9. Julian Schramm, Chemische Berichte, vol. 16, (1883), p. 1582
  10. US2064254
  11. FR741385
  12. J. U. Nef, Justus Liebigs Annalen der Chemie, vol. 310, (1900), p. 323
  13. Thilagavathi, Natarajan; Jayabalakrishnan, Chinnasamy, Central European Journal of Chemistry, vol. 8, Issue 4, (2010), p. 842 - 851
  14. Rajkumar, G Abraham; Sivamurugan, V;Arabindoo, Banumathi; Murugesan, V; Indian Journal of Chemistry: Sec B- Organic Chemistry including Medicinal Chemistry, Mild and selective oxidation of alcohols and deoximation of oximes over supported quinolinium fluorochromate, Vol.43B (05) May 2004, p. 936-946
  15. [Brooks Bailey, Electrolytic Oxidation of Lignin,Journal of the American Chemical Society, vol. 68, (1946), p. 446 http://pubs.acs.org/doi/abs/10.1021/ja01207a029]
  16. Park, Byung-Ik; Bozzelli, Joseph W.; Booty, Michael R.; Bernhard, Mary J.; Mesuere, Karel; Pettigrew, Charles A.; Shi, Ji-Chun; Simonich, Staci L.; Environmental Science and Technology, vol. 33, Issue 15, (1999), p. 2584 - 2592
  17. Meerwein; Burneleit; Chemische Berichte; vol. 61; (1928); p. 1845
  18. Meerwein; Bersin; Burneleit; Chemische Berichte; vol. 62; (1929); p. 1006

Relevant Sciencemadness threads