Difference between revisions of "Strontium oxide"

From Sciencemadness Wiki
Jump to: navigation, search
 
Line 153: Line 153:
 
[[Category:Materials that react with water]]
 
[[Category:Materials that react with water]]
 
[[Category:Materials unstable in acidic solution]]
 
[[Category:Materials unstable in acidic solution]]
 +
[[Category:Irritants]]

Latest revision as of 21:28, 5 July 2017

Strontium oxide
Names
IUPAC name
Strontium oxide
Preferred IUPAC name
Strontium oxide
Systematic IUPAC name
Strontium oxide
Other names
Oxostrontium
Strontia
Properties
SrO
Molar mass 103.619 g/mol
Appearance White solid
Odor Odorless
Density 4.70 g/cm3
Melting point 2,531 °C (4,588 °F; 2,804 K)
Boiling point 3,200 °C (5,790 °F; 3,470 K) (decomposes)
Reacts
Solubility Insoluble in organic solvents
Vapor pressure ~0 mmHg
Thermochemistry
57.2 J·mol−1·K−1
-592.0 kJ/mol
Hazards
Safety data sheet Sigma-Aldrich
Flash point Non-flammable
Related compounds
Related compounds
Magnesium oxide
Calcium oxide
Barium oxide
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
Infobox references

Strontium oxide, strontia or SrO, is formed when strontium metal reacts with oxygen. Burning strontium in air results in a mixture of strontium oxide and strontium nitride. It also forms from the decomposition of strontium carbonate SrCO3. It is a strongly basic oxide.

Properties

Chemical

SrO reacts with water, releasing heat and producing strontium hydroxide. In open air, it reacts with water vapor and carbon dioxide, slowly converting to strontium carbonate over time.

It will react with many acids to form strontium salts and water.

SrO + 2 HNO3 → Sr(NO3)2 + H2O

Physical

SrO is a white solid, usually in powder form. Strontium oxide will react in contact with water. It is slightly soluble in ethanol, but insoluble in acetone and ether. It has a very high melting and boiling point (2,531 °C and 3,200 °C respectively).

Availability

Strontium oxide can be purchased from chemical suppliers, although it's easier to find strontium carbonate and hydroxide than the simple oxide, as they're less reactive.

Preparation

Strontium oxide can be prepared by heating strontium hydroxide or strontium carbonate at temperatures above 710°C, where they decompose to to release water and carbon dioxide.

Projects

  • Make strontium metal (reducing with aluminium in inert atmosphere or vacuum)
  • Make strontium salts
  • Red colored fireworks

Handling

Safety

Strontium oxide is extremely corrosive to the human tissue as it reacts vigorously with the water from them, and releases heat which causes severe burns. Gloves must be worn at all times while handling SrO.

Strontium ions, being similar to the calcium ones, pose little danger to health when consumed. In fact, many studies on both animals and humans have shown that strontium supplements can increase the density and strength of bones. However it is advised to avoid consuming lab-grade strontium compounds, as they are unfit for consumption.

Storage

Contact with damp air must be kept to a minimal to prevent it from reacting with water and oxides of carbon and nitrogen and other reactive gases.

Disposal

Strontium oxide can be neutralized with water or a cheap acid. Since most of strontium compounds are similar to calcium compounds, it can be dumped without any special precautions. However, as strontium is rarer than calcium, it's best to try to recycle the compound when possible.

References

Relevant Sciencemadness threads