| Search |
| [Next Page] |
Silver Acetylide synthesis
I don't think those pics are big enough  |
21-12-2012 at 12:31
by: gnitseretni |
Exotic Primaries - Complex Salts
Finally got a chance to make some Nickel Hydrazine Nitrate. I decided to make it on a tiny scale for ... |
24-11-2012 at 13:24
by: gnitseretni |
ETN - H2SO4 surplus + mixed charge
Yes, you can. |
24-11-2012 at 10:23
by: gnitseretni |
GEET Fuel Processor
You don't believe you can get more MPGs by running a gas engine on gasoline vapor? What exactly are ... |
16-9-2012 at 12:43
by: gnitseretni |
GEET Fuel Processor
The invertor calls the GEET Fuel Processor an "on-board compact [b]plasma[/b] fuel refinery that ren ... |
16-9-2012 at 10:25
by: gnitseretni |
Need Hydrazine hydrate
I'm looking for hydrazine hydrate, but I can't find a company that will sell it to individuals. (Wel ... |
12-9-2012 at 14:42
by: gnitseretni |
The short questions thread (3)
Ha, I just bought a hand operated pump for $70 five mins ago. Goes up to 9700 PSI. Should be enough ... |
11-9-2012 at 18:03
by: gnitseretni |
The short questions thread (3)
A couple of years ago I tried some hydroforming with my pressure washer but it didn't have enough pr ... |
10-9-2012 at 19:45
by: gnitseretni |
Funnel/trumpet liner vs straight cone?
0.5 CD from base of the liner? Surely you meant to say from TIP of the liner? 0.5 CD is very little ... |
2-9-2012 at 06:02
by: gnitseretni |
Unconventional Shaped Charges
Oops, yeah I thought it was steel. Was kinda wondering why you'd use a steel pipe and then hold the ... |
6-6-2012 at 19:35
by: gnitseretni |
Unconventional Shaped Charges
Some improvements would be like you already said, thicker liner, more head height, perhaps increase ... |
6-6-2012 at 16:10
by: gnitseretni |
Question for a machinist
Nah, I think I'll just get that plate from McMaster that I mentioned in my first post.
Thanks thoug ... |
8-3-2012 at 16:11
by: gnitseretni |
Rouge science
If he really did kill that guy for whatever reason other than self defense or to save someone else's ... |
8-3-2012 at 04:03
by: gnitseretni |
Question for a machinist
Lexan wouldn't work. The bed is heated from underneath with resistors, to about 70C. The bed is heat ... |
8-3-2012 at 03:54
by: gnitseretni |
Question for a machinist
Crap, I meant 9 inches square (9X9). Sorry, everybody!  |
7-3-2012 at 19:42
by: gnitseretni |
Question for a machinist
A pool of mercury? I think I'll pass up on that
Btw, it's 9 square inch, not 3 square inch. |
7-3-2012 at 16:42
by: gnitseretni |
Question for a machinist
Sounds interesting. I'll look into it. |
7-3-2012 at 09:34
by: gnitseretni |
Question for a machinist
I understand why you question the rigidity of the machine. I don't like the plastic parts either, no ... |
6-3-2012 at 10:08
by: gnitseretni |
Question for a machinist
I found a website of a guy that does alot of scraping. I contacted him to see if he'd be interested ... |
5-3-2012 at 16:06
by: gnitseretni |
Question for a machinist
The plate will be used as a bed on a 3D printer. I need a bed with a flatter surface than the one I ... |
4-3-2012 at 19:58
by: gnitseretni |
Question for a machinist
I don't know any local shop that uses laser, waterjet but not laser. The waterjet shop has a $50 min ... |
4-3-2012 at 16:07
by: gnitseretni |
Question for a machinist
I have a question for a machinist.
I need a 9 square inch 1/4" thick aluminum plate that's as fla ... |
4-3-2012 at 15:37
by: gnitseretni |
Unconventional Shaped Charges
Did another shaped charge. But it was a failure. Wasn't nearly as loud as it shoulda been. I think I ... |
4-3-2012 at 13:29
by: gnitseretni |
Unconventional Shaped Charges
[rquote=225498&tid=10575&author=watson.fawkes]On the other hand, it might be more, because a ... |
23-10-2011 at 15:59
by: gnitseretni |
Unconventional Shaped Charges
You're right. That top block is pretty deformed. I think that if I had used a larger block (like you ... |
23-10-2011 at 11:15
by: gnitseretni |
| [Next Page] |
