Sciencemadness Discussion Board
Not logged in [Login ]
Go To Bottom

Search
[Next Page]
Effect of Water on Detonation
[rquote=282217&tid=24060&author=Trotsky]


Really my question is a) how much will water a ...
28-7-2013 at 17:53
by: golfpro
Poor performing ETN
The main ingrediant is still erythritol in the Truvia brand, I couldn't imagine it could be much dif ...
27-7-2013 at 18:16
by: golfpro
Poor performing ETN
I wonder if the reason for my poor yeilds is my lower conc Sulfuric acid (93%) or if it's that my er ...
27-7-2013 at 11:27
by: golfpro
golfpro's Nitric Acid for Beginners
I have my nitric acid in a glass bottle with a glass stopper that doesn't quite fit, just a tad bit ...
26-7-2013 at 19:47
by: golfpro
Storing concentrated Nitric Acid
Hi,

I have these dark brown glass bottles with black plastic lids, these are not acid bottled t ...
26-7-2013 at 07:21
by: golfpro
golfpro's Nitric Acid for Beginners
I got it, I had to use a good amount of heat though, actually some silver nitrate precipitated as cr ...
25-7-2013 at 13:29
by: golfpro
Nitric Acid from Retort.
Hi,

I distilled approx. 10ml nitric acid from 50ml sulfuric acid/38gram KNO3, I used an oil bath ...
25-7-2013 at 10:54
by: golfpro
Poor performing ETN
My AN is from cold packs, it is disolved completely in water, filtered the filmy, anticaking stuff, ...
25-7-2013 at 10:24
by: golfpro
Poor performing ETN
I'll maybe try Rooto as a last resort, so it is possible that what I have isn't pure ETN? Even if it ...
25-7-2013 at 08:37
by: golfpro
Poor performing ETN
Hi,

So I have made 3 batches of ETN in all of my life. I yeild about 10 grams on average, which t ...
24-7-2013 at 20:49
by: golfpro
golfpro's Nitric Acid for Beginners
Ya.
20-7-2013 at 13:36
by: golfpro
golfpro's Nitric Acid for Beginners
Somehow I had in my mind that nitric acid distilled from a sulfuric mix get's an acid that is higher ...
20-7-2013 at 12:31
by: golfpro
golfpro's Nitric Acid for Beginners
So is it even less desirable to have NO contamination than NO2? what temp should my oil bath be?
20-7-2013 at 10:50
by: golfpro
golfpro's Nitric Acid for Beginners
I have a couple uses for nitric acid right off the top of my head, well it's cool first of all, seco ...
19-7-2013 at 17:05
by: golfpro
golfpro's Nitric Acid for Beginners
What I gather:

-Around 85-99% nitric acid may be made by nonvacuum distilling sulfuric/ammonium n ...
19-7-2013 at 14:31
by: golfpro
golfpro's Nitric Acid for Beginners
I want to precipitate a clean pure double salt. I want to collect pure AgNO3, and then use some nitr ...
19-7-2013 at 13:56
by: golfpro
Nitric Acid concentration from distilling H2SO4/NO3
Hi, I am wondering what exactly or approximately is the concentration of nitric acid that is distil ...
18-7-2013 at 18:39
by: golfpro
golfpro's Nitric Acid for Beginners
How about Sodium Nitrate as the nitrate salt?? I can make that but Barium nitrate is a bit expensive ...
17-7-2013 at 07:41
by: golfpro
golfpro's Nitric Acid for Beginners
My silver is 99.7% pure

Ok so now here is a question:

I mix ammonium nitrate (pure) in sulfur ...
16-7-2013 at 19:09
by: golfpro
Erlenmeyer Vacuum Flask
So I had a glass jar with a hole on top for rubber tubing, then I epoxy sealed this to make it air t ...
14-7-2013 at 19:58
by: golfpro
Erlenmeyer Vacuum Flask
Hi, what does a vacuum flask do in the process of bubbling a gas through solution? I have a set up t ...
14-7-2013 at 17:05
by: golfpro
golfpro's Nitric Acid for Beginners
What do you mean separate the silver from the copper?? Where is there copper?
13-7-2013 at 16:28
by: golfpro
golfpro's Nitric Acid for Beginners
<strong>Silver Nitrate w/ H2SO4 and Nitrate salt</strong>

I know I had another thread ...
13-7-2013 at 09:28
by: golfpro
Who here is capable of Non-Peroxide initiators?
My NO2/NO bubbled through 10% H2O2 made some very weak nitric acid, it hardly reacted with the coppe ...
11-7-2013 at 15:52
by: golfpro
Who here is capable of Non-Peroxide initiators?
Right now I am playing around with things around the house. I am doing the nurdrage experiment makin ...
11-7-2013 at 11:00
by: golfpro
[Next Page]

  Go To Top