Sciencemadness Discussion Board
Not logged in [Login ]
Go To Bottom

Search
[Next Page]
Tour My Lab
it is for making chlorohydrate, for that you need strong stirring and cooling.

By aligning the bu ...
29-7-2020 at 16:39
by: XeonTheMGPony
best wire for an electric detonator
Steel wool is amazing very high resistance but hard to work.

30 to 40 gauge Ni chrome is my other ...
27-7-2020 at 03:39
by: XeonTheMGPony
Is Peroxide in Ethanol and issue for distillation?
they they add it to water. 2 drips of 35% H2O2 magically will turn water into a cure for every thing ...
27-7-2020 at 03:31
by: XeonTheMGPony
HotPlate Branding
[rquote=640728&tid=155794&author=Mateo_swe]Someone should do a nice writeup how to make a DI ...
15-7-2020 at 05:09
by: XeonTheMGPony
HotPlate Branding
As others said never go by temp, go by watts first and foremost and any thing below 500 is going to ...
15-7-2020 at 03:43
by: XeonTheMGPony
Azides
Having difficulties free basing my Hydrazene, When doing it as Chem player does, I end up with a goo ...
5-7-2020 at 07:48
by: XeonTheMGPony
how to distinguish a solution containing chloroform from one with dichloromethane?
I just distilled with a rectifying column with care full monitoring of heat, then from there I did p ...
29-6-2020 at 04:12
by: XeonTheMGPony
fire peroxide
here you can get 35% in 4 liter jugs. never seen it catch any thing on fire as of yet,
26-6-2020 at 03:31
by: XeonTheMGPony
Cryo Refrigerated Well ... thingy
why I prefer glycol secondary loops.
25-6-2020 at 03:37
by: XeonTheMGPony
fixing cracked glass / glassblowing
I use a map torch for most my glass stuff, propane turbo torch for smaller tube work.

I greatly m ...
23-6-2020 at 16:20
by: XeonTheMGPony
Cryo Refrigerated Well ... thingy
if you can do quality soldering (Brazing preferred you can make a -80c cold trap
23-6-2020 at 16:17
by: XeonTheMGPony
Best solvent to remove & dissolve unfired rifle primers
yup or a mobile solution is dripped in and surface tension does the rest.
16-6-2020 at 16:39
by: XeonTheMGPony
Distillation of solvents
[rquote=638500&tid=155583&author=Panache]just to be annoying to everyone, distillation rate ...
16-6-2020 at 04:59
by: XeonTheMGPony
Best solvent to remove & dissolve unfired rifle primers
The way the .22LR is primed will make this a head act no matter what way you go, with that said, I'd ...
16-6-2020 at 04:42
by: XeonTheMGPony
fairly new to energetic chemistry
Start with the blasters hand book, then read some manuals on practical blasting, and how explosives ...
15-6-2020 at 15:34
by: XeonTheMGPony
Grey colour when making lead acetate
yup I did a big batch of lead nitrate, Usually takes a couple of filters and a crystallization to ge ...
15-6-2020 at 03:52
by: XeonTheMGPony
Distillation of solvents
in vacuum you drop the boiling temp AND condensing temp so you need a colder condenser.

Sorry the ...
15-6-2020 at 03:35
by: XeonTheMGPony
Grey colour when making lead acetate
The usual alloy is Antimony and rarer except for battery grids Calcium
14-6-2020 at 06:21
by: XeonTheMGPony
Tour My Lab
[rquote=638193&tid=4777&author=Mateo_swe]You made it yourself?
You must have good glass wor ...
12-6-2020 at 15:26
by: XeonTheMGPony
H2O2 vs Acids, injuries and pain
[rquote=637944&tid=155553&author=Syn the Sizer][rquote=637930&tid=155553&author=Chem ...
9-6-2020 at 16:41
by: XeonTheMGPony
H2O2 vs Acids, injuries and pain
[rquote=637930&tid=155553&author=Chemorg42][rquote=637921&tid=155553&author=Morgan]M ...
9-6-2020 at 16:38
by: XeonTheMGPony
1st hotplate stirrer
general rule nothing under 600watts heating power is recomended
7-6-2020 at 09:18
by: XeonTheMGPony
Thermometer and distillation
http://alchemylabsupply.3dcartstores.com/Thermometer-Adapter_p_176.html
7-6-2020 at 07:20
by: XeonTheMGPony
Just bought an FTIR Spectrometer
you may have to find a few different adapters but once you find the right one should be good. I've c ...
2-6-2020 at 05:25
by: XeonTheMGPony
ETN Stability as primary explosive
And water is wet!

That is sort of a well understood fundamental, very un wise and dangerous to st ...
2-6-2020 at 05:15
by: XeonTheMGPony
[Next Page]

  Go To Top