| Search |
| [Next Page] |
Finding small amounts of Plutonium or U235?
[rquote=687594&tid=159878&author=Texium][rquote=687593&tid=159878&author=beerwiz]I c ... |
26-9-2023 at 13:23
by: beerwiz |
Finding small amounts of Plutonium or U235?
[rquote=687563&tid=159878&author=woelen] Most of the people over here already are struggling ... |
26-9-2023 at 12:01
by: beerwiz |
Finding small amounts of Plutonium or U235?
Plutonium seems to be too complex to source or synthesize. But I can definitely substitute it with U ... |
25-9-2023 at 17:40
by: beerwiz |
Finding small amounts of Plutonium or U235?
[rquote=687554&tid=159878&author=phlogiston]No offence, but are you serious?
What a bizarre ... |
24-9-2023 at 20:36
by: beerwiz |
Finding small amounts of Plutonium or U235?
I want to run some tests on small amounts of pure Plutonium (239 or 241) and U235, just need about 1 ... |
24-9-2023 at 11:27
by: beerwiz |
Dealing with Lye Lock (Zinc Hydroxide Solution + NaOH)?
I have an aqueous solution of zinc hydroxide and free amine that was made alkaline with NaOH. The so ... |
29-6-2020 at 01:42
by: beerwiz |
Diaphragm pump + aspirator no B.P. change?
The water in the tank needs to be cold. The problem with setups like yours is that the water heats u ... |
3-6-2020 at 14:07
by: beerwiz |
Vacuum glass implosion?
It happened to me in the early days during my first vacuum distillation. I taped the flat bottom fla ... |
3-6-2020 at 13:57
by: beerwiz |
What type of vessel to use for MELTING NaOH or KOH at 1200C?
I gave the white ceramic crucible a try and it was fine, it endured 2 hours of KOH at 1200'C.
@mo ... |
3-6-2020 at 04:27
by: beerwiz |
Melting sulfur - can SO2 be created?
[rquote=637168&tid=155486&author=chornedsnorkack]This:
http://www.inchem.org/documents/icsc ... |
30-5-2020 at 20:16
by: beerwiz |
Melting sulfur - can SO2 be created?
Sulfur melts at 115.21°C. I melted it recently and I didn't notice any SO2. I kept the melt going f ... |
29-5-2020 at 17:40
by: beerwiz |
Device that heats at around 40 degrees C?
I would use a vacuum oven similar to this one in the picture, it can maintain the preset temperature ... |
29-5-2020 at 01:12
by: beerwiz |
What type of vessel to use for MELTING NaOH or KOH at 1200C?
[rquote=637040&tid=155482&author=mackolol]I believe that crucibles are good for such purpose ... |
29-5-2020 at 00:56
by: beerwiz |
Advice on buying a GC/MS
Get an FTIR with ATR. Most models come with software that can do a compound search, meaning it can i ... |
29-5-2020 at 00:29
by: beerwiz |
What type of vessel to use for MELTING NaOH or KOH at 1200C?
I want to run some experiments with molten NaOH and KOH at around 1200'C but I understanding that th ... |
29-5-2020 at 00:26
by: beerwiz |
Antimony toxicity...??
Antimony is brutal. I use it in my alchemical procedures and you must use appropriate respiratory pr ... |
9-3-2020 at 15:17
by: beerwiz |
Distillation Setup for 1100°C (High Tmperature)?
I tried an open top ceramic crucible but the compound sublimated on the sides and lid of the furnace ... |
30-1-2020 at 20:02
by: beerwiz |
Distillation Setup for 1100°C (High Tmperature)?
I need to distill or more accurately sublime a compound that has a high boiling point of 1100°C. Re ... |
30-1-2020 at 02:08
by: beerwiz |
Red Phosphorus Source
Phosphorus does come as the PCl, PCl3, and PCl5. |
19-12-2019 at 11:37
by: beerwiz |
Red Phosphorus Source
I would make the phosphorus if needed. Take a phosphorus salt like the Phosphorus chloride or the tr ... |
19-12-2019 at 11:22
by: beerwiz |
AcOH test synth questions.
Fun fact: AcOH (acetic acid) is the Acetate salt of Hydrogen, you can call it Hydrogen acetate. |
19-12-2019 at 10:37
by: beerwiz |
DIY oil mist filter, made a little challenge
It's been my experience that even high end oil mist filters are useless. The lab space still gets in ... |
19-12-2019 at 10:27
by: beerwiz |
Red Phosphorus Source
Just buy plain Phosphorus, it is white. Then heat it to 250C, it will turn into red phosphorus. |
19-12-2019 at 10:23
by: beerwiz |
Need Lab Space Advice - Power at current place can't support all of my equipment
Current location is an apartment in a residential building. A generator is not suitable for an apart ... |
17-12-2019 at 21:33
by: beerwiz |
Need Lab Space Advice - Power at current place can't support all of my equipment
All 120V circuits
It's very frustrating, I'm working on a project that has inifinite ROI yet some ... |
17-12-2019 at 20:42
by: beerwiz |
| [Next Page] |
