| Search |
ETN Synthesis/Yield Problems
[rquote=182585&tid=14148&author=the Z man]Don't crimp the detonator tube around the fuse, es ... |
17-7-2010 at 09:39
by: jack3k3 |
ETN Synthesis/Yield Problems
Alright so I had a successful (I believe) test finally. I used 1/4inch copper tubing, crimped one en ... |
17-7-2010 at 01:21
by: jack3k3 |
ETN Synthesis/Yield Problems
Actually sorry I wasn't clear, the acetone solution sitting on the al foil was actually the previous ... |
16-7-2010 at 06:01
by: jack3k3 |
ETN Synthesis/Yield Problems
Well, I gathered some new materials (heet for methanol, 27% h2o2 for AP) though I did leave out that ... |
15-7-2010 at 18:08
by: jack3k3 |
ETN Synthesis/Yield Problems
Hmm, I'd like to try that but unfortunately I have no access to those things. I get paid tomorrow, w ... |
14-7-2010 at 21:39
by: jack3k3 |
ETN Synthesis/Yield Problems
Well luckily after allowing it to sit in the freezer a couple hours I was able to get a much better ... |
14-7-2010 at 19:07
by: jack3k3 |
ETN Synthesis/Yield Problems
[rquote=182374&tid=14148&author=quicksilver]Acetone is much too strong a solvent for ETN. Th ... |
14-7-2010 at 16:52
by: jack3k3 |
ETN Synthesis/Yield Problems
Well I did an ETN yield with 35g erythritol so my yield should have been around 50g or so ETN. And I ... |
13-7-2010 at 20:50
by: jack3k3 |
ETN Synthesis/Yield Problems
Today I was able to get a hot plate and heat up the acetone and stir in the ETN. After sufficiently ... |
13-7-2010 at 20:25
by: jack3k3 |
ETN Synthesis/Yield Problems
Yes indeed a hotplate will be on my list, note that the heating was just to warm it up, I wouldn't a ... |
12-7-2010 at 21:45
by: jack3k3 |
ETN Synthesis/Yield Problems
Yes I've done some searching but was not able to find too many specifics on how to actually perform ... |
12-7-2010 at 21:29
by: jack3k3 |
ETN Synthesis/Yield Problems
On my third synth of ETN, I have come to notice, in comparison with other pictures of ETN yields, th ... |
12-7-2010 at 17:15
by: jack3k3 |
