| Search |
| [Next Page] |
Quick question
since a detonation event in the compustion chamber produce higher pressures than normal compustion, ... |
4-1-2007 at 23:28
by: kine |
Quick question
well i will wait for the pulse detonation engine to come out then some time in the future....
tha ... |
23-12-2006 at 10:48
by: kine |
Quick question
It seems that the only way to increase the burn rate of fuel/air mix is detonation. I am planing to ... |
23-12-2006 at 09:30
by: kine |
Quick question
I am kooking for a gas catalist that will increase the burn rate of gasoline/air mix with out detona ... |
22-12-2006 at 23:32
by: kine |
Can't make CuO
I started the thread for the CuO formation but i have done some experiments lately with copper and i ... |
15-12-2005 at 09:33
by: kine |
Identifying a metal oxide
Does ebay ship stuff like scales over Europe? |
15-8-2005 at 00:06
by: kine |
Identifying a metal oxide
Used equal volumetric amounts and added a little extra CuO, i remember reading someone did this way ... |
14-8-2005 at 13:24
by: kine |
Identifying a metal oxide
I have film canister half full with CuO/Al (how many gram is this?)stored with the lid on a shelf, u ... |
14-8-2005 at 00:09
by: kine |
Identifying a metal oxide
H2S is explosive on open air at the right concentrations and a little toxic.
Ayway tomorow i will ... |
13-8-2005 at 09:27
by: kine |
Identifying a metal oxide
Ok thanks for the clarification. I have the wased and clean powder on the cloth (found it good since ... |
12-8-2005 at 09:48
by: kine |
Identifying a metal oxide
Ok everything is perfect (i got a lot of black powder in a pan with lots of water) and i want to fil ... |
12-8-2005 at 05:11
by: kine |
Identifying a metal oxide
Ok i will boil it down but how can i filter it? The vaporising pan seems bad idea for me because it ... |
11-8-2005 at 21:12
by: kine |
Identifying a metal oxide
Can't that be done with the dry powder in the pyrex? The impurity Cu(OH)2 will not react with t ... |
11-8-2005 at 10:09
by: kine |
Identifying a metal oxide
Well i got a good yeld in a big plastic plate and waiting water to vaporise with a 500w heat lamp ab ... |
11-8-2005 at 05:42
by: kine |
Identifying a metal oxide
I found cromium oxide 1 kg for 7 euro (around the same as US dolars) Is it safe for thermite/flash c ... |
11-8-2005 at 05:03
by: kine |
Identifying a metal oxide
Ok i made some but i have no scale (my food scale has broken) so i added by volume. The copper sufla ... |
11-8-2005 at 00:29
by: kine |
Identifying a metal oxide
I will use a pyrex for drying the Cu(OH)2 after filtering it out
Is CuO/Al thermite storage safe ... |
10-8-2005 at 10:25
by: kine |
Identifying a metal oxide
I bought the colouring agent for lime and plaster and it has similar magnetic properties as Fe3O4. U ... |
10-8-2005 at 01:44
by: kine |
Identifying a metal oxide
Well there is no site on the company that makes the black dust neither i can make a test in the stor ... |
9-8-2005 at 11:09
by: kine |
Identifying a metal oxide
Today i found accidentaly a store that sells bricks in colors and some colored glasses. At a shelf i ... |
9-8-2005 at 06:33
by: kine |
Identifying a metal oxide
Ok i found a pottery industry close where i live and tomorow i will give a call and ask about CuO. H ... |
8-8-2005 at 11:24
by: kine |
Identifying a metal oxide
I am not sure that the black is manganese dioxide it just says that it is manganese black, could it ... |
8-8-2005 at 10:47
by: kine |
Identifying a metal oxide
I made a search at the "Energetic materials" forum for "exploding targets" byt t ... |
8-8-2005 at 09:46
by: kine |
Identifying a metal oxide
In that case copper oxide seems suitable but how can i be sure before i buy it? I mean there are a l ... |
8-8-2005 at 07:07
by: kine |
Identifying a metal oxide
Guess it is magnetite Fe2O4 because it sticks on the magnet. Although i wish it was CuO because of m ... |
8-8-2005 at 04:31
by: kine |
| [Next Page] |
