| Search |
Nafion Cell for Chloro Alkali
The Cement membranes are less conductive if they are too thick but are very robust. I recommend adding f ... |
22-8-2023 at 20:23
by: mysteriusbhoice |
DIY Divided electrochemical cell with stirring and cooling
Cement takes a few days to cure completely I would let it set for a day and put it underwater for 1 ... |
17-8-2023 at 18:09
by: mysteriusbhoice |
Trying to Build First Electrolytic Cell: Diaphragm/Ion Permeable Membrane?
... resin.
How to make a diaphragm out of it? How to dissolve it?[/rquote]
You can imbed them into Cement like in this video.
https://www.youtube.com/watch?v=crAlzaicWFM
iONOMER Cement. |
17-8-2022 at 05:02
by: mysteriusbhoice |
LL8 from Dr. Liptakov
... I have made better castable membranes for easy setup like the ionomer concrete.
mix of sand + OPC Cement + CaSO4 9:3:1 ratio.
The CaSO4 can be substituted for cation exchange resin from the water f ... |
7-5-2022 at 01:31
by: mysteriusbhoice |
Good DIY selectivity membrane for cation exchange.
[rquote=644604&tid=155884&author=macckone]Cement is attacked by Na2SO4 and H2SO4.
Na2SO4 is a waste product with NaHSO4 from making HCl gas.
... |
24-9-2020 at 09:50
by: mysteriusbhoice |
Hydride Embrittlement of Titanium Cathode.
... changed, once it is evident that irreversible damage has occurred. [/rquote]
Yea im getting a replaCement anyway since the Ti mesh has started to fracture down the middle due to heavy use in dozens o ... |
7-8-2020 at 02:44
by: mysteriusbhoice |
Strange Copper 2 chlorate + sodium chlorate complex
STEPS:
1. I used a porous cell in which the barrier is constructed using sand + PVC Cement which allows water and ions to pass.
2. The cell was then treated with one side soaked in HC ... |
17-7-2020 at 05:32
by: mysteriusbhoice |
More on PbO2 electrodes
... omposite with anodes is.
1.) Polyolefins
2.) Hot glue sticks
3.) Wax or similar compounds
PVC Cement fails hard due to additives in the Cement and after usage in anode composite embrittlement oc ... |
17-5-2020 at 09:16
by: mysteriusbhoice |
Electrolytic Production of Sulphuric Acid + some questions.
... side!!
Ca(OH)2 is not soluble in water just make sure no CO2 enters the cathode are or else ..... Cement |
6-10-2017 at 08:57
by: mysteriusbhoice |
