chemrox
International Hazard
Posts: 2961
Registered: 18-1-2007
Location: UTM
Member Is Offline
Mood: LaGrangian
|
|
separation dilemma
I made a liquid, aromatic with a halogenated side chain that boils around 230. There are an expected 200 ml of this product in about 2.5 L of MeCl2.
To separate I can either divide into aliquots and then use the flash evaporator or I can set up a 3 L still. Gone the first route once and it was
tedious. I had other things to do so it took a week to get it all down to the 183 ml I had left. I haven't tried the second approach. Awfully
tempting though. I don't think my product is particularly sensitive to heat. Maybe an atmosphere of N2 as a precaution?
Thanks for all advice, derisive or friendly.
CRX
"When you let the dumbasses vote you end up with populism followed by autocracy and getting back is a bitch." Plato (sort of)
|
|
Ephoton
Hazard to Others
Posts: 463
Registered: 21-7-2005
Member Is Offline
Mood: trying to figure out why I need a dark room retreat when I live in a forest of wattle.
|
|
what I would do for something like that is dry solution then setup with equalized drop
funnel then strip most of the dcm under atmospheric and the last bit under vacuum.
this way your always dealing with a small distillation that is continuously topped up as is needed.
I find it better to set the size of my glass on the end product rather than the beginning
solution when it comes to stripping solvents off oils.
e3500 console login: root
bash-2.05#
|
|
Nicodem
Super Moderator
Posts: 4230
Registered: 28-12-2004
Member Is Offline
Mood: No Mood
|
|
What exactly is the purpose of this thread? I might be too dumb, but I fail to see what kind of a problem is being discussed.
|
|
DJF90
International Hazard
Posts: 2266
Registered: 15-12-2007
Location: At the bench
Member Is Offline
Mood: No Mood
|
|
I believe chemrox is asking for opinions on which method of separation would be best, flash evaporation in several aliquots or 3L distillation.
Personally I think Ephoton's idea of topping up with an addition funnel would be my route of choice.
Edit: Should possibly be in the short questions thread...
[Edited on 23-9-2008 by DJF90]
|
|
chemrox
International Hazard
Posts: 2961
Registered: 18-1-2007
Location: UTM
Member Is Offline
Mood: LaGrangian
|
|
sorry-should have been in short questions. That one got started while I was on sabbtical..thanks ephoton for a solution that is simple and effective
"When you let the dumbasses vote you end up with populism followed by autocracy and getting back is a bitch." Plato (sort of)
|
|