RabbitTy
Harmless
Posts: 26
Registered: 19-9-2019
Member Is Offline
|
|
remove ion pairing reagent after pre-HPLC my products
I have some inpurities need to be separated by pre-hplc.
Sodium 1-heptanesulfonate and Potassium dihydrogen sulfate been added to enhance the separation.
However,I need to remove ion pairing reagents.
My products are alkaline
Mobile phase is 71% Acetonitrile and 29% water.
could anyone help please.
|
|
DavidJR
National Hazard
Posts: 908
Registered: 1-1-2018
Location: Scotland
Member Is Offline
Mood: Tired
|
|
Best approach would be to come up with a HPLC method that doesn’t require any nonvolatile additives.
|
|
unionised
International Hazard
Posts: 5115
Registered: 1-11-2003
Location: UK
Member Is Offline
Mood: No Mood
|
|
That's about as much help as saying "if you don't mix them, you won't need to separate them".
You can often remove ion pairing reagents using an ion exchange resin.
Depending on exactly what they are you might be able to do something like the classic "alkaloid" extraction.
If you are really really lucky, just adding an alkali like NaOH to deprotonate the material then adding excess sodium chloride and cooling the
mixture will get it to separate into two layers (CH3CH doesn't mix with salt water)
and you product will dissolve into the ACN, leaving the other stuff in teh aqueous phase.
[Edited on 23-9-19 by unionised]
|
|
DavidJR
National Hazard
Posts: 908
Registered: 1-1-2018
Location: Scotland
Member Is Offline
Mood: Tired
|
|
Oh I know, but it’s true, isn’t it?
|
|
RabbitTy
Harmless
Posts: 26
Registered: 19-9-2019
Member Is Offline
|
|
Quote: Originally posted by unionised |
That's about as much help as saying "if you don't mix them, you won't need to separate them".
You can often remove ion pairing reagents using an ion exchange resin.
Depending on exactly what they are you might be able to do something like the classic "alkaloid" extraction.
If you are really really lucky, just adding an alkali like NaOH to deprotonate the material then adding excess sodium chloride and cooling the
mixture will get it to separate into two layers (CH3CH doesn't mix with salt water)
and you product will dissolve into the ACN, leaving the other stuff in teh aqueous phase.
[Edited on 23-9-19 by unionised] |
Thx!My products are cyclovirobuxine D and analogues. Alkaloid~Could u please introduce me some method of Ion-exchange resin.
|
|
RabbitTy
Harmless
Posts: 26
Registered: 19-9-2019
Member Is Offline
|
|
Ive tried several different mobile phase type.Only with ion pairs could my product be separated.Its alkaloid with some analogues. The main component
is cyclovirobuxine D.
|
|
DavidJR
National Hazard
Posts: 908
Registered: 1-1-2018
Location: Scotland
Member Is Offline
Mood: Tired
|
|
There are volatile ion paring reagents though, mainly perfluorinated straight chain carboxylic acids...
|
|