A possible novel method for obtaining malonic acid through electro-oxidation of 1,3-propanediol is suggested by the attached paper. In it they studied
electro-oxidation of both 1,2- and 1,3-propanediol at various noble metal anodes in both acidic and alkaline conditions, and the conditions and
reaction intermediates were studied using cyclic voltammetry and in situ infrared reflectance spectroscopy.
At the platinum anode, regardless of conditions, a mixture of C1, C2 and C3 products were always formed because of dissociative adsorption of
1,3-propanediol at the platinum electrode, leading to a mixture of formaldehyde, formic acid, malonic acid and CO2.
But interestingly, at a gold anode, in alkaline conditions, malonic acid is the main product formed and no CO2 evolution was measured.
To quote: "the 1,3-propanediol chemisorptions is not dissociative and all reaction oxidation products are C3 molecules" and "on the gold
electrode in NaOH medium, no oxidation of malonic acid by voltammetry was observed, and the SPAIRS spectra recorded show only the bands of the
water".
Considering this, I imagine that a simple divided cell with a gold (or gold-plated  ) anode, an inert cathode, anolyte 1,3-PDO in aqueous NaOH and catholyte just aq. NaOH would be a very viable approach. The end result
should be an alkaline solution of chiefly disodium malonate.
Since disodium malonate is insoluble in alcohol, isolation may be as simple as flooding the post-reaction anolyte with ethanol until it precipitates
from solution.
Attachment: electrooxidation_study_PDO__ijcrcps12.pdf (837kB)
This file has been downloaded 39 times
sic transit gloria mundi
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
