Sciencemadness Discussion Board
Not logged in [Login ]
Go To Bottom

Printable Version  
Author: Subject: Basic organic compunds from Petrol
Picric-A
National Hazard
****




Posts: 796
Registered: 1-5-2008
Location: England
Member Is Offline

Mood: Fuming

[*] posted on 12-8-2008 at 12:32
Basic organic compunds from Petrol


I have recently taken an interest in Organic Chemistry.
One of the biggest things holding me back is the seemingly endless amount of simple reaents needed to perform experiments.
Some poeple have the luxury of being able to buy chemicals to suit their need. some people know what exact type of paint thinner to look for when buying methylbenzene, for example.
I have to admit i am pretty useless when it comes to looking for certain types of paint thinners to get methyl benzene ect...

I have recently been thinking, what is extremly easy to buy, with no suspicious dealers involved and no questions asked... Petrol is what i decided upon. Through furthur research on what petrol contains exactly i decided this was the best source:
http://en.wikipedia.org/wiki/Gasoline

In the source it states these ingredients commonly found in petrol (i have added boiling points) :
Hydrocarbons- carbon chains from 5--> 12 (varies)
Benzene (up to 5%) (80.1 °C)
Toluene (up to 35%) (110.6 °C)
Napthalene ( up to 1%) (218 °C)
Trimethylbenzene ( up to 7%) (170 °C)
Methyl tert-butyl ether (up to 18%) (55.2 °C)

Unfortunatly my computer fails to open a msds of unleadded petrol so i can not see the other 10 ingredients but form the list i thoguht distillation seems easy.
what i would do is heat the petrol to around 69 degrees tp start with, letting the hydrocarbons chain 5-6 boil off. tthen at 80degrees start collecting benzene and so on.

Has anybody tried obtaining things like benzene form petrolor has anyone had any experiencec they would like to share?
Many thanks,
Picric-A
View user's profile View All Posts By User This user has MSN Messenger
matei
Hazard to Others
***




Posts: 205
Registered: 16-9-2006
Member Is Offline

Mood: No Mood

[*] posted on 12-8-2008 at 13:02


At 80 degrees you will collect a mixture of benzene and aliphatic hydrocarbons. Aromatic hydrocarbons can be extracted from petrol using adequate solvents (I think it was a thread a while ago on that subject). You just can't separate pure substances from such a mixture by distillation, even with an extremely performant fractionating column. Anyway, you have to keep in mind that using simple distillation you can separate well substances which have a b.p. difference of at least 50 deg. C or so.
View user's profile View All Posts By User
Picric-A
National Hazard
****




Posts: 796
Registered: 1-5-2008
Location: England
Member Is Offline

Mood: Fuming

[*] posted on 12-8-2008 at 13:43


well i was going to use a fractionating colum but i agree it will be hard to seperate the benzene from the other compounds with similar boiling points, i havnt thought about solvent extraction...
View user's profile View All Posts By User This user has MSN Messenger
Klute
International Hazard
*****




Posts: 1378
Registered: 18-10-2006
Location: France
Member Is Offline

Mood: No Mood

[*] posted on 12-8-2008 at 17:12


Oh, even with a nice column, you would need one hell of a reflux ratio etc to isolate benzene or toluene... There is a reason why they make 100m high rectification towers in rafineries :)

I would suggest not to abandon on the quest for solvents, but look elsewhere than jsut the conventional hardware shops. Certain small stores selling cleaning products, industrials washing, etc can get you technical solvents dirt cheap.

Better use the gasoline to look around with your car than to distill it IMHO :)




\"You can battle with a demon, you can embrace a demon; what the hell can you do with a fucking spiritual computer?\"

-Alice Parr
View user's profile View All Posts By User
not_important
International Hazard
*****




Posts: 3873
Registered: 21-7-2006
Member Is Offline

Mood: No Mood

[*] posted on 12-8-2008 at 22:06


What makes up your petrol is going to vary from country to country. Gasoline in the USA will yield very little benzene, I believe under 5% total substituted benzenes such as toluene and xylene, and MTBE is being phased out.

Len did some tests to try to measure the aromatics in Australian petrol, and found it was fairly high.

You'll need a good fractionating column to get decent separations, as already said. On the other hand, for just general purpose hydrocarbon solvent, low grade fractionation will yield low boiling petroleum ether - best when 'winter' gasoline is used. The cuts with aromatics in them can be used for some reactions, a mild permanganate will remove alkenes, after that HNO3, H2SO4, or Cl2/Br2 with iron catalyst will yield the corresponding substituted aromatics which will be much easier to separate from the non-reactive alkanes.
View user's profile View All Posts By User
Sauron
International Hazard
*****




Posts: 5351
Registered: 22-12-2006
Location: Barad-Dur, Mordor
Member Is Offline

Mood: metastable

[*] posted on 13-8-2008 at 04:01


Distillation is very energy intensive. Even if you could succeed, which you really can't, you would have the world's most expensive solvents. Toluene is cheap and often can be found OTC just as an example.

This is really a blind alley.




Sic gorgeamus a los subjectatus nunc.
View user's profile View All Posts By User
ScienceSquirrel
International Hazard
*****




Posts: 1863
Registered: 18-6-2008
Location: Brittany
Member Is Offline

Mood: Dogs are pets but cats are little furry humans with four feet and self determination! :(

[*] posted on 13-8-2008 at 04:17


Ronsonol, a light petroleum spirit sold for use in petrol lighters and for stain removal, can be used as a petroleum ether substitute at a pinch.
It works out quite expensive but if you just need a few ml it is bearable.
View user's profile View All Posts By User
Picric-A
National Hazard
****




Posts: 796
Registered: 1-5-2008
Location: England
Member Is Offline

Mood: Fuming

[*] posted on 13-8-2008 at 13:56


yes sciencesquirrel thats what i use,
i dont agree that its expencive though, i buy myn around £5 a litre! cheaper than propanone
View user's profile View All Posts By User This user has MSN Messenger
Klute
International Hazard
*****




Posts: 1378
Registered: 18-10-2006
Location: France
Member Is Offline

Mood: No Mood

[*] posted on 13-8-2008 at 15:06


5 quid a liter IS expensive :)



\"You can battle with a demon, you can embrace a demon; what the hell can you do with a fucking spiritual computer?\"

-Alice Parr
View user's profile View All Posts By User

  Go To Top