APO
National Hazard
Posts: 627
Registered: 28-12-2012
Location: China Lake
Member Is Offline
Mood: Refluxing
|
|
Octanitrocubane
Here is a quick scheme I made on a possible synthesis for Cubane Tetracarboxylicchloride which is a precursor to Tetranitrocubane which is a precursor
to Heptanitrocubane and finally Octanitrocubane:
<img src="http://www.aposma.host56.com/Cubane.jpg" width="900" />
I don't know if it will work, since I modified it quite a bit, so I would like input on any problematic areas. This is based off of various cubane
syntheses, and my own modifications. Nothing shown is mean't to be stoichiometric. Also, could Nitryl Chloride be added to Cubane Dicarboxylic Acid or
Cubane Tetracarboxylicchloride to nitrosate it to Octanitrocubane in one shot?
References:
http://www.synarchive.com/syn/14
http://www.synarchive.com/syn/189
http://www.ch.ic.ac.uk/local/projects/b_muir/Cubane/Cubanepr...
https://sites.google.com/site/energeticscribble/comparison-w...
Attachment: Dimethyl Cubane-1,4-Dicarboxylate.pdf (305kB)
This file has been downloaded 537 times
[Edited on 5-8-2013 by APO]
<!-- bfesser_edit_tag -->[<a href="u2u.php?action=send&username=bfesser">bfesser</a>: reduced
image size(s)]
[Edited on 5.8.13 by bfesser]
"Damn it George! I told you not to drop me!"
|
|
|
Dany
Hazard to Others
Posts: 482
Registered: 3-8-2013
Member Is Offline
Mood: No Mood
|
|
the first obvious problem is in the last step: I don't know how you create two more carbon atoms when refluxing with thionyl chloride!
and no you can't put NOCl to nitrate it to ONC. first you have two electrophilic species: your acyl chloride and NOCl. you need a nucleophile and
electrophile. in fact if you succeed to synthesize the molecule (1,3,5,7-tetraacylchloride) you may in theory reacted with NaN3 that will form the
azido derivative (addition-elemination on acyl group). by heating the resulting acylazide, you will induce a Curtis rearrangement forming a
tetraisocyanate. oxidizing tetraisocyanate with DMDO (Dimethyldioxirane) you will transform the tetraisocyanate to 1,3,5,7-tetranitrocubane. next,
nitrating the tetranitro derivatives need to create a carbanion on the adjacent carbon (carbon adjacent to nitro-bearing carbon) wich is the methode
of Eaton et al. the formation of this carbanion by sodium HEXAMETHYLDISILAZANE ( same procedure of Eaton) is possible because the cubyl carbon is
relatively acid (presence of electroattracting nitro group next to him). in fact Eaton did an "interfacial nitration" with N2O4 at low temperature,
the step are repeated to to achieve ONC.
but you must put in mind that only one synthesis has been published, and maybe the result of Eaton et al. are not reproducible.
what is disappointing abou ONC is that all methods used (empirical, semi-empirical and theoretic) fail to predict the correct crystallin density wich
appear less than predicted. The scientist hope that is another more dense polymorph yet to discover. this is done by recrystallisation of ONC by
various solvent.
i think the most promising and fastest method for synthesizing ONC is by tetraoligomerization of dinitroacetylene. Unfortunately, dinitroacetylene is
unstable. recently Philip PAGORIA of the Lawrence Livermore National Laboratory (LLNL) succeed in the isolation of a stable form of mononitroacetylene
(in the form of binuclear complexe of cobalt carbonyl). another metastable derivative of mononitroacetylene is the silylated one. but this compound
decompose in solution.
you may need to read the following interesting paper
"En route to dinitroacetylene: nitro(trimethylsilyl)acetylene and nitroacetylene harnessed by dicobalt hexacarbonyl"
Windler GK, Zhang MX, Zitterbart R, Pagoria PF, Vollhardt KP.
Dany.
[Edited on 5-8-2013 by Dany]
[Edited on 5-8-2013 by Dany]
[Edited on 5-8-2013 by Dany]
[Edited on 5-8-2013 by Dany]
[Edited on 5-8-2013 by Dany]
|
|
|
bfesser
Resident Wikipedian
Posts: 2114
Registered: 29-1-2008
Member Is Offline
Mood: No Mood
|
|
<strong>APO</strong>, you've provided zero references. How do you expect this to be taken seriously?
|
|
|
APO
National Hazard
Posts: 627
Registered: 28-12-2012
Location: China Lake
Member Is Offline
Mood: Refluxing
|
|
Bfesser, just added my source material. Dany, I fixed the last part, it was actually Phosgene, not Thionyl Chloride. Also Nitryl Chloride is NO2Cl,
not NOCl. Could Nitryl Chloride be used instead of Nitrosyl Chloride and Ozone for converting Heptanitrocubane to Octanitrocubane though?
"Damn it George! I told you not to drop me!"
|
|
|
Dany
Hazard to Others
Posts: 482
Registered: 3-8-2013
Member Is Offline
Mood: No Mood
|
|
what i am sure is that the last step is wrong. you cannot introduce an acyl chloride just by heating this substrat with phosgene. This reaction may be
done photochemically.
this is an old reference for synthesizing cyclohexanoyl chloride from cyclohexane and phosgene. of course the reaction is a photochemical one.
THE PHOTOCHEMICAL REACTIONS OF OXALYL CHLORIDE AND PHOSGENE WITH CYCLOHEXANE (J. Am. Chem. Soc., 1940, 62 (2), pp 454–454).
Dany.
|
|
|
APO
National Hazard
Posts: 627
Registered: 28-12-2012
Location: China Lake
Member Is Offline
Mood: Refluxing
|
|
Fixed the last part, again.
"Damn it George! I told you not to drop me!"
|
|
|
Dany
Hazard to Others
Posts: 482
Registered: 3-8-2013
Member Is Offline
Mood: No Mood
|
|
Let me give you an advice in Organic chemistry. you can amuse yourself all the day by drawing theoretical organic scheme on board. In reality, what
may seem logical on a paper may not work at all in Lab. to be a serious chemist and scientist, theoretical calculation should be done on every
reaction using for example DFT (Density Functional Theory) to calculate the energy of each intermediate and predict the most plausible transition
state, or simply trying the reaction in a lab under different conditions. i gave you the example of cyclohexane just for information. Cubyl systems
have different reactivity and are not simple cycloalkane. you cannot simply copy-past a reaction condition from substrate to another! Yes, you can
make this for fun but you drawing are uncertain and only informative.
Dany.
[Edited on 5-8-2013 by Dany]
[Edited on 5-8-2013 by Dany]
[Edited on 5-8-2013 by Dany]
|
|
|
APO
National Hazard
Posts: 627
Registered: 28-12-2012
Location: China Lake
Member Is Offline
Mood: Refluxing
|
|
I know... I'm just curious if this synth will work.
"Damn it George! I told you not to drop me!"
|
|
|
Motherload
Hazard to Others
Posts: 245
Registered: 12-8-2012
Location: Sewer
Member Is Offline
Mood: Shitty
|
|
Did you not read Dany's post.
That should answer your question.
"Chance favours the prepared mind"
"Fuck It !! We'll do it live !!"
|
|
|
APO
National Hazard
Posts: 627
Registered: 28-12-2012
Location: China Lake
Member Is Offline
Mood: Refluxing
|
|
Just implying it may not work, is not informative enough. I would like to know specific reasons why. Just answer if it were done under proper
conditions if these reactions would work to produce the specified compounds.
"Damn it George! I told you not to drop me!"
|
|
|
Dany
Hazard to Others
Posts: 482
Registered: 3-8-2013
Member Is Offline
Mood: No Mood
|
|
Hello APO,
The scientific answer to your question is that this synthesis work for the cuban 1,4-dicarboxylic acid because it is already published. beyound this
step you cannot predict (just by sitting in front of you PC) the outcom of the reaction (for the formation cuban 1,3,5,7-tetracarboxilic acid). The
prediction will be uncertain. This should be done experimentally (or theoretically, using reliable model for this system). Just an important remark:
although the synthesis of the cuban 1,4-dicarboxylic acid is published, result may not be reproducible. in fact one of the major problem in organic
chemistry is that many published work are not reproducible. the reason is that the authors of published paper have omitted this point
(reproducibility) so as they can publish in high impact factor journal. for the same reason (publishing in high impact factor) the authors may not
telling the truth about the real yield. So you may want to synthesis a compound already descibed in the literature, and you will realize that some
reaction give low yield, significally lower from the published yield. but at the same time reaction yield depend also on the operator, reagents and
purity.
Dany.
|
|
|
APO
National Hazard
Posts: 627
Registered: 28-12-2012
Location: China Lake
Member Is Offline
Mood: Refluxing
|
|
Full Octanitrocubane Synthesis
<img src="http://www.apo.comule.com/ONC.jpg" width="666" height="370">
Above is my revised synthesis of Octanitrocubane, all these reactions have been stitched together from various synthesis diagrams. As you can see I
added some extra notes about nitration workup. I'm not including my written procedure yet as I've only covered the steps up to Cubane Dicarboxylic
Acid. Here's pretty much what is happening, note that I've only included the main reactions, no workup included or detailed reactions conditions or
reagent specifications. This is just to give a rough idea of what all this would be like.
Cyclopentanone reacts with Ethylene Glycol using Toluene Sulfonic Acid acid as a catalyst and Toluene as an azeotroping agent while refluxing for
thirty hours using a barret type dean-stark trap to remove water. Once the Acid-Catalysed Ketalization is finished the Cyclopentanone Ethylene Ketal
formed is then Brominated by adding elemental Bromine dropwise to a solution of it in Dioxane and stirring it for two days. After Bromination, the
Tribromocyclopentanone Ethylene Ketal formed undergoes partial Dehydrohalogenation and Dimerization by the Diels-Alder Reaction, this is done by
refluxing in a solution of Methanol and Sodium Hydroxide for two hours. Then the Bisethylene Ketal groups on the Dibromodicyclopentadienedione
Bisethylene Ketal created are hydrolysed off by stirring with Sulfuric Acid for thirty and a half hours. The Dibromodicyclopentadienedione produced
undergoes photocatalyzed cage formation by reacting with Methanol, and aqueous Hydrochloric Acid while being irradiated by a Mercury lamp the duration
of the reaction depends on the lamps output. Then the new cage formed undergoes the Favorskii Rearrangement by refluxing in aqueous Sodium Hydroxide
and acidifying with Hydrochloric Acid to form Cubane Dicarboxylic Acid. The Cubane Dicarboxylic Acid is then refluxed with Thionyl Chloride for two
hours to form Cubane Dicarboxylic Chloride. The new product made is then reacted with Oxalyl Chloride while being irradiated with a Mercury lamp to
form Cubane Tetracarboxylic Chloride, again the duration of the reaction depends on the lamps power. The Cubane Tetracarboxylic Chloride is then
reacted with Trimethylsilyl Azide to form the Tetracarboxylic Azide, and then heated to form the Tetraisocyanate. Then the Cubane Tetraisocyanate
formed is Hydrolyzed with water to form Cubane Tetraamine. The Amine groups on the Cubane Tetraamine are oxidized with Dimethyldioxirane to form
Tetranitrocubane. The Tetranitrocubane then undergoes interfacial nitration, first it is cooled, and Sodium Bistrimethylsilyl Amide is added to the
Tetranitrocubane in a solution of Tetrahydrofuran and Methyl Tetrahydrofuran, then it is cooled further and Dinitrogen Tetroxide in cold Isopentane is
added dropwise to form Heptanitocubane. Finally the Heptanitrocubane is added to Lithium Bistrimethylsilyl Amide in Dichloromethane to form the
Lithium salt. The Lithium salt of Heptanitrocubane is then reacted with Nitrosyl Chloride to form Nitrosoheptanitrocubane and then with Ozone to
oxidize the Nitroso group to a Nitro group, giving Octanitrocubane.
Now I have a couple questions, could Dimethyldioxirane be replaced with Peroxymonosulfuric Acid for converting the Cubane Tetraamine to
Tetranitrocubane? Several threads here and various internet sources describe it's use for oxidizing Amine groups to Nitro groups, which is exactly
what Dimethyldioxirane is used for. I think it would be easier to use than Dimethyldioxirane since, while both must be prepared immediately prior to
use, the production of Dimethyldioxirane while cheap, gives very low yield and requires an elaborate setup, immediate titration and cold temperature.
Peroxymonosulfuric Acid, while somewhat dangerous, it is very easy to prepare on site, just mixing two things together, no big deal. Now for my second
question, could Nitryl Chloride could be used in place of Nitrosyl Chloride and Ozone to nitrate the final position on the Cubane? Just to simplify
the process a little, and because Ozone is quite difficult to produce in significant quantity.
Here are my sources:
Applications of Cubane
Further Cubane Topics
Cubane Reactivity
Multiple Cubane Synthesis
Trinitro and Tetranitro Cubane Synthesis
Improved Tetranitrocubane Synthesis
Pentanitro and Hexanitro Cubane Synthesis
Heptanitro and Octanitrocubane Synthesis
Properties of Heptanitro and Octanitrocubane
Philip E. Eaton Synthesis of Cubane
John Tsanaktsidis Synthesis of Cubane
Octanitrocubane Synthesis Overview
Cubane Derivitives for Propellant Applications
Dimethyl Cubane-1,4-Dicarboxylate: A Practical Laboratory Scale Synthesis
Design and Synthesis of Explosives: Polynitrocubanes and High Nitrogen Content Heterocycles
All input is appreciated, especially literature, answers, and related. Any documents describing procedures of anysort would be awesome.
Thanks.
"Damn it George! I told you not to drop me!"
|
|
|
Dany
Hazard to Others
Posts: 482
Registered: 3-8-2013
Member Is Offline
Mood: No Mood
|
|
Hello APO,
once again you return to octanitrocubane (ONC). So this time i see that your synthesis will stop at the 11th step (formation of the tetraaminocubane).
In your case you cannot form tetranitrocubanes from the corresponding tetraaminocubane because your amino group are adjacent and thus, ring cleavage
will occurs . This is the same problem that Eaton et al. faced during the synthesis of ONC. below i copied from [1] what Eaton says about the
oxidation of adjacent amino groups to nitro on a cubane scaffold:
"...There is nothing wrong with this, even on the cubane skeleton; 1,2-diaminocubanes have been made. They are relatively stable compounds, but
ring cleavage reactions intervene during attempted oxidation to the corresponding 1,2-dinitrocubane. This sort of skeletal cleavage always happens
when attempts are made to place an electrondonating group (e.g. NH2) on a cubane carbon adjacent to one bearing an electron-withdrawing
substituent (e.g.NO2). It is unavoidable and is one of the very few limitations imposed on manipulation of substitution/substitution
pattern in the cubanes"
So if your are lucky and the synthesis work, probably the farthest compound you can make is the tetraaminocubane (i didn't check the previous
steps, but the step of oxidation of the tetraaminocubane to the corresponding tetranitro will not work).
Reference:
[1] Philip E. Eaton, Mao-Xi Zhang, Richard Gilardi, Nat Gelber , Sury Iyer, Rao Surapaneni, Octanitrocubane: A New Nitrocarbon, Propellants,
Explos., Pyrotech., 27(1), 1-6, 2002.
Dany.
[Edited on 9-10-2013 by Dany]
Attachment: Octanitrocubane A New Nitrocarbon.pdf (105kB)
This file has been downloaded 2262 times
|
|
|
APO
National Hazard
Posts: 627
Registered: 28-12-2012
Location: China Lake
Member Is Offline
Mood: Refluxing
|
|
So, instead of that, could the reaction of Cubane 1,4-Dicarboxylic Chloride with Oxalyl Chloride be ommited to proceed with the next four steps to
form 1,4-Dinitrocubane? That way ring cleavage could be avoided? If yes, then could the 1,4-Dinitrocubane then undergo interfacial nitration to
Heptanitocubane and so on?
If that's not an option, traditional synthesis routes are way to lenghty, but if I were able to replicate the JC Barborak synthesis up to the
formation of 1,3-Cubane Dicarboxylic Acid and add enough Oxalyl Chloride, according to the conversion pathways here it would form 1,3,5,7 Cubane Tetracarboxylic Chloride, which would work perfectly for stages 9-14 on my synthesis diagram.
Now, how would I make or get Cyclobutadieneiron Tricarbonyl and 2,5-Dibromobenzoquinone?
"Damn it George! I told you not to drop me!"
|
|
|
Dany
Hazard to Others
Posts: 482
Registered: 3-8-2013
Member Is Offline
Mood: No Mood
|
|
well...2,5-Dibromobenzoquinone can be bought from TCI chemicals (TCI sell chemical to laboratory, i don't know if they accept to send items to
individual)
http://www.tcichemicals.com/eshop/fr/eu/commodity/D2249/
Cyclobutadieneiron Tricarbonyl:
http://www.orgsyn.org/orgsyn/orgsyn/prepContent.asp?prep=cv6...
(and references therein)
Dany.
|
|
|
bfesser
|
Threads Merged
9-10-2013 at 14:42 |
APO
National Hazard
Posts: 627
Registered: 28-12-2012
Location: China Lake
Member Is Offline
Mood: Refluxing
|
|
I found this for 2,5-Dibromobenzoquinone starting from 1,4-Benoquinone:
<img src="http://apo.comule.com/2,5-Dibromohydroquinone.png" width="660" height="340">
1,4-Benzoquinone is reacted with Hydrobromic Acid to form 2,5-Dibromohydroquinone.
<img src="http://apo.comule.com/2,5-Dibromobenzoquinone.png" width="450" height="200">
2,5-Dibromohydroquinone is reacted with Ceric Ammonium Nitrate to form 2,5-Dibromobenzoquinone.
Certainly preferable to paying two hundred dollars to TCI for two grams of the stuff, considering you can make more than a pound for that price.
Any easier synthesis for Cyclobutadieneiron Tricarbonyl though?
"Damn it George! I told you not to drop me!"
|
|
|
APO
National Hazard
Posts: 627
Registered: 28-12-2012
Location: China Lake
Member Is Offline
Mood: Refluxing
|
|
For the Cyclobutadieneiron Tricarbonyl, I haven't found any alternative synthesis route other than what's found on Orgsyn and Wikipedia.
Meanwhile, this patent says that Cubane-1,4-dicarboxylic Acid can be converted to 1,3,5,7-Tetranitrocubane by
| Quote: |
photolyzing a solution of cubane-1,4-dicarboxylic acid, oxalyl chloride, and methanol under a sunlamp to form 1,3,5,7-tetramethoxycarbonylcubane. The
1,3,5,7-tetramethoxycarbobnylcubane is refluxed with diphenylphosphoryl azide and triethylamine in tert-butyl alcohol to form
1,3,5,7-tetra[(tert-butoxycarbonyl)-amino]cubane. The 1,3,5,7-tetra[(tert-butoxycarbonyl)-amino]cubane is hydrolyzed and decarboxylated to the form
1,3,5,7-tetraamino cubane. The 1,3,5,7-tetraamino cubane is refluxed with m-chloroperbenzoic acid and 4,4′-thiobis(2-tert-butyl-6-methylphenol)
in dichloroethane to yield 1,3,5,7-tetranitrocubane
|
Is this right? How is the fourth position swapped like that? According to the conversion pathways of Cubane Carboxylic Chloride here, Cubanes with Carboxylic Chloride groups on both postions one and four, follow a very strict path way on group addition that leads directly
to 1,2,4 and then 1,2,4,7 positions.
Also, still no answer on if 1,4-Dinitrocubane could undergo interfacial nitration all the way up to Heptanitrocubane. I mean, do you really need to
start from Tetranitrocubane? Why isn't a less nitrated form suitable for interfacial nitration?
"Damn it George! I told you not to drop me!"
|
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
