elementcollector1
International Hazard
Posts: 2684
Registered: 28-12-2011
Location: The Known Universe
Member Is Offline
Mood: Molten
|
|
Blackening Steel
What would be a good way to do this at RT for long-lasting results? The reason I can't use a hot bath is because the steel has industrial-strength
glue on it, and I don't want to mess with the composition of that.
Elements Collected:52/87
Latest Acquired: Cl
Next in Line: Nd
|
|
Burner
Hazard to Others
Posts: 100
Registered: 28-3-2014
Member Is Offline
Mood: No Mood
|
|
There are a number of commercial solutions for this (ex. http://www.amazon.com/RT-S25-blackening-concentrate-bluing-s...). If the item is something you are willing to use for experimentation I suggest
that you find a copy of the Metal Finishing Handbook. If I remember correctly they had a few recipes in there that you might find useful.
|
|
elementcollector1
International Hazard
Posts: 2684
Registered: 28-12-2011
Location: The Known Universe
Member Is Offline
Mood: Molten
|
|
It's not for experimentation; this is intended to be the finished product.
Plus, that product doesn't seem legit...
Elements Collected:52/87
Latest Acquired: Cl
Next in Line: Nd
|
|
Burner
Hazard to Others
Posts: 100
Registered: 28-3-2014
Member Is Offline
Mood: No Mood
|
|
Why do you say that? I suggest that you google the product before you clamp down hard. The company that makes it has been in business a long time
and you will find many positive reviews on the web. Of course you may not trust them. That is your call.
[Edited on 16-6-2014 by Burner]
|
|
m1tanker78
National Hazard
Posts: 685
Registered: 5-1-2011
Member Is Offline
Mood: No Mood
|
|
Would the glue withstand a dip in strong acid? Can you re-glue the pieces if needed? Do you roughly know what the alloy composition is? Industrial
strength.... as in liquid nails or some super secret proprietary stuff???
If you're unwilling or unable to experiment with the item, you might try calling around to antique shops and/or gun shops. Usually, the more
mom-and-pop-ish, the better - to a point.
Oh, and what sort of abrasion resistance are you aiming for here? Have you considered a durable spray-on finish?
Tank
Chemical CURIOSITY KILLED THE CATalyst.
|
|
Texium
Administrator
Posts: 4566
Registered: 11-1-2014
Location: Salt Lake City
Member Is Offline
Mood: PhD candidate!
|
|
I wonder what that solution contains. Possibly some copper salts, based on the blue color?
If that's all, it could be cheaper to make yourself rather than buying it at that price. Of course, there's probably other ingredients, and the
concentration would be important too.
|
|
IrC
International Hazard
Posts: 2710
Registered: 7-3-2005
Location: Eureka
Member Is Offline
Mood: Discovering
|
|
Quote: Originally posted by zts16 | I wonder what that solution contains. Possibly some copper salts, based on the blue color?
If that's all, it could be cheaper to make yourself rather than buying it at that price. Of course, there's probably other ingredients, and the
concentration would be important too. |
Copper-Selenium compounds (varying recipes abound) for cold bluing. Rubs off too easily, and must be kept coated with a waxy-oily mix. Mid temp bluing
is still in the 220 degree F range. Only hot bluing gives a decent result. A boiling hot 300 F mix of Sodium Hydroxide, Nitrate, and Nitrite. Mixture
must be made outside or in fume hood as Ammonia gas is given off for the first while when preparing the solution. If cold working is mandatory no way
will you make your own anywhere nearly as cheap as the bottle you can buy at Walmart or various other places, identical to the link already given that
EC1 didn't seem to like. Whats not to like? It's either that or go the hot blue route.
http://en.wikipedia.org/wiki/Black_oxide
http://www.smokstak.com/forum/showthread.php?t=68321
"Science is the belief in the ignorance of the experts" Richard Feynman
|
|
bobm4360
Hazard to Self
Posts: 59
Registered: 18-4-2011
Location: On a wretched little island.
Member Is Offline
Mood: No Mood
|
|
Rust blue is as permanent as hot blue, just labor intensive!!! If the piece will stand 100 deg. C., you lightly rust the part, remove the rust with
steel wool or a SOFT wire brush, boil to turn the rust black, and repeat as necessary. There are slightly less formulae for rust bluing than there
are known stars in the universe and most of them work. Otherwise, I often use Birchwood-Casey cold blue cream, and heat the part in running hot
water as hot as I can stand, and swab it on. Usually takes 2 or 3 coats. Wear latex or nitrile gloves!
|
|
aga
Forum Drunkard
Posts: 7030
Registered: 25-3-2014
Member Is Offline
|
|
you can use a 'tampon' with a weak acid (not sure which) and pass a current thru it and the steel.
the tampon should be a bag of some sort with cotton or rockwool in it.
The tampon is where the acid is, and where you connect one electrode.
Other electrode goes on the steel.
Cold process and you can choose which bits go black.
[Edited on 17-6-2014 by aga]
|
|
wallschem
Harmless
Posts: 6
Registered: 17-11-2010
Member Is Offline
Mood: No Mood
|
|
I use cold blueing to protect from rust the spring of the mechanism I manufacture, and I get very good results cleaning the spring with iso propanol,
then in a 50ml of wather add 10g of Selenium oxide, 15ml of Nitric acid and 10g of Cupper sulfate. And it takes 3 seconds to get a very nice blueing,
I have a video of the making of the mechanism and the steps to make the cold blueing solution.
http://m.youtube.com/watch?v=t9V_b8ANCGg
|
|
franklyn
International Hazard
Posts: 3026
Registered: 30-5-2006
Location: Da Big Apple
Member Is Offline
Mood: No Mood
|
|
Read & view the lower part here _
www.sciencemadness.org/talk/viewthread.php?tid=24480#pid2864...
Baking in an oven will set the finish. The finish shows the
level of polish of the bare metal. A dull finish will look dull.
A mirror finish will appear as such.
.
|
|