| Pages:
1
2 |
BromicAcid
International Hazard
Posts: 3242
Registered: 13-7-2003
Location: Wisconsin
Member Is Offline
Mood: Rock n' Roll
|
|
Disposal of mercury salts (hazardous waste in general).
I've always at least tried to care for my environment. I don't flush chemicals down drains, except things that normally go down drains
(BaSO4, CuSO4, H2SO4), I don't just dump on the ground, except things that normally go on the ground (Some Nitrates, seems to like strong
hydroxides and iron salts too). If I have a metal compound in a high oxidation state I will reduce it (Mn+7 and such), if it cannot be made
environmentally friendly (i.e., nickel salts, lead salts) I might keep it, theoretically forever (after evaporating it to a solid). Solvents are
always a pain, it all depends.
But today I worked with mercury and its salts. I really disliked the idea but I needed about .5 g of mercuric oxide. Now I have 150 ml of a solution
that most likely contains mercury contamination, it was a mercuric nitrate solution, I added carbonate to it and precipitated the mercuric oxide which
is the procedure that I found, and supposedly mercuric oxide is insoluble in water. Therefore the mercury contamination should be nil.
However the solution is still off yellow-orange. So I didn't want to just dump it, I will evaporate it and keep it forever if I have to.
Elemental mercury could be disposed of at a hazardous waste collection agency. So that is a possible disposal route. The sulfide is highly
insoluble, I'm wondering if that would be a reliable way to pacify it (Similar to the 'safety' of barium sulfate).
The other mercury thread was an interesting read but no real help.
Regardless, how do the hazardous waste disposal companies get rid of this nuisance? Whenever I tried to find "Mercury Disposal" with any
other modifying terms all I could find were clean up kits.
|
|
|
DDTea
National Hazard
Posts: 940
Registered: 25-2-2003
Location: Freedomland
Member Is Offline
Mood: Degenerate
|
|
I know the EPA mixes Hazmats with cement (it might be cement, or some other compound..) and molds them into cylinders. That's all I know about
that topic.
|
|
|
chemoleo
Biochemicus Energeticus
Posts: 3005
Registered: 23-7-2003
Location: England Germany
Member Is Offline
Mood: crystalline
|
|
I would serioulsy consider converting the remaining Hg x+ solution to HgS, simply by bubbling H2S through it. I guess you know that H2S is made rather
easily.
In fact, the mercury spill kit we have in the lab intrigued me at first, so I had a look at it.
Surprise surprise, it contains solid sulphur! All you have to do is powder the solid sulphur onto it, and let it be absorbed/reacted for a few hours.
HgS, despite what the MSDS says, is probably the safest Hg salt that is easily made. It doesnt react with most acids/alkalis, and in fact for a long
time, and even these days (in special circumstances) it is used for painting.
I think if you just convert it to the sulphide, your conscience should be at ease.
That reminds me... so are you going to get rid of the weeds simply by cutting them? 
|
|
|
Nick F
Hazard to Others
Posts: 439
Registered: 7-9-2002
Member Is Offline
Mood: No Mood
|
|
Yep, mercury sulphide has a solubility of a few molecules per litre, from what I've heard. That's the safest form you'll get!
|
|
|
BromicAcid
International Hazard
Posts: 3242
Registered: 13-7-2003
Location: Wisconsin
Member Is Offline
Mood: Rock n' Roll
|
|
Well, I guess I will try to precipitate with solid sulfur, and if that doesn't work I will put a pea sized piece of iron sulfide into a test tube
and add a few drops of HCl and bubble that though my solution.
If I get a precipitate I will keep it and store it indefinitely, or I might make some use of it someday. The liquid will be tossed, a few molecules
of HgS in the environment is acceptable. More Hg went into the environment when I opened the lid to my Hg then that.
Of course just because I've made up my mind doesn't mean other ideas would not be appreciated.
|
|
|
Magpie
lab constructor
Posts: 5939
Registered: 1-11-2003
Location: USA
Member Is Offline
Mood: Chemistry: the subtle science.
|
|
lab waste disposal
Bromic Acid,
I must commend you for your environmental consciousness. My goals are similar - i.e., I intend to comply with the law, as a minimum.
As a SQG (small quantity generator) you can put some wastes, up to certain quantities, down the drain legally. Details depend on where you live.
Hazardous/toxic waste is another matter. Everyone should investigate and take full advantage of what waste disposal services their local agencies
provide. My city has a "medium hazard" waste disposal station which provides small quantity househould waste disposal free to residents
(paid for by our taxes). This is a wonderful way to get rid of pesticides, paint solvents, used oil, etc. Some of the pesticides they take in are
surely more toxic than any waste I will likely generate. There will be some exceptions and I, like you, plan to deal with them case by case. I plan
to fully address waste disposal in the experiment planning stage.
For air polution my goal here is to never get a complaint from a neighbor. I plan to design an air purifying system for my hood exhaust. It's
just another project on my list.
The single most important condition for a successful synthesis is good mixing - Nicodem
|
|
|
Organikum
resurrected
Posts: 2337
Registered: 12-10-2002
Location: Europe
Member Is Offline
Mood: frustrated
|
|
Neutralize the solution and dip a rod of pure zinc or tin into it. (even Al will work) The Hg will amalgamate into the zink and be removed almost
completely.
Give it some time though.
|
|
|
KidCurry
Hazard to Self
Posts: 54
Registered: 12-3-2004
Location: Europe
Member Is Offline
Mood: No Mood
|
|
Disposal of mercury salts
What are the options for disposal of mercury salts (mercury(I) and mercury(II) chloride)? Small amounts, under 1 gram, used for amalgamation. Dumping
it in the sink really isn't ethical, but nearest enviromental station that takes dangerous chemicals is a long way away. Is it ok to use it to
amalgamate some aluminium and then throw it away?
|
|
|
garage chemist
chemical wizard
Posts: 1803
Registered: 16-8-2004
Location: Germany
Member Is Offline
Mood: No Mood
|
|
Dissolve them in plenty of water and bubble hydrogen sulfide through it until no more precipitate forms. (H2S can be prepared by heating paraffin with
sulfur in a test tube with stopper+vent pipe into the solution, H2S evolves as a gas and carbon is left behind).
HgS is not listed as a hazardous material.
|
|
|
neutrino
International Hazard
Posts: 1583
Registered: 20-8-2004
Location: USA
Member Is Offline
Mood: oscillating
|
|
Alternatively, you could use a metal sulfide. Na<sub>2</sub>S is sold in some photo stores.
|
|
|
garage chemist
chemical wizard
Posts: 1803
Registered: 16-8-2004
Location: Germany
Member Is Offline
Mood: No Mood
|
|
Na2S is not recommended, look in the "Preparation of Vermillion" Thread to see why. It forms a soluble complex with the mercury if too much
Na2S is used.Therefore it's tricky.
However, he complex is destroyed when HCl is added until it is acidic, this precipitates all the mercury. Beware of the evolving H2S, though!
[Edited on 29-7-2005 by garage chemist]
|
|
|
Ephoton
Hazard to Others
Posts: 463
Registered: 21-7-2005
Member Is Offline
Mood: trying to figure out why I need a dark room retreat when I live in a forest of wattle.
|
|
just checking
so after doing an al/hg reduction I could
filter the solution then bubble H2S to get
the mercury back.
wiked
|
|
|
ChemicalBlackArts
Harmless
Posts: 8
Registered: 17-8-2005
Location: Michigan
Member Is Offline
Mood: No Mood
|
|
Wellll, BaSO4 shouldn't exactly be dumped down the drain. The Ba2+ ion poses a significant environmental hazard, as ecosystems really have no way
of getting rid of the sulfate. As for mercuric salt disposal, just send it in to the EPA if you can. Last year, the EPA ordered a cleanup of Michigan
high school chemistry labs, and all mercury, derivatives and elemental form was sent into the EPA. I'm actually not sure whether or not
they're still running the program, however.
--Chemistry in my veins--
|
|
|
chromium
Hazard to Others
Posts: 284
Registered: 27-6-2005
Member Is Offline
Mood: reactive
|
|
BaSO4 is common mineral that can be found everywhere in the world. So it can not be remarkably dangerous to environment. It is insoluble in water and
looks like quartz or calcite.
|
|
|
BromicAcid
International Hazard
Posts: 3242
Registered: 13-7-2003
Location: Wisconsin
Member Is Offline
Mood: Rock n' Roll
|
|
Also, tons of it (probably literally) go down the drain each year, in order to x-ray the colon they force people to consume barium sulfate solutions
then they send them home where they deposit it in the normal manner in the toilet.
|
|
|
The_Davster
A pnictogen
Posts: 2861
Registered: 18-11-2003
Member Is Offline
Mood: .
|
|
| Quote: | Originally posted by BromicAcid
they force people to consume barium sulfate solutions |
Force them is right, I had to have one of those done around 6 years ago and it tasted horrible.
|
|
|
12AX7
Post Harlot
Posts: 4803
Registered: 8-3-2005
Location: oscillating
Member Is Offline
Mood: informative
|
|
| Quote: | Originally posted by chromium
BaSO4 is common mineral that can be found everywhere in the world. So it can not be remarkably dangerous to environment. |
Now now, let's not forget where mercury, arsenic and uranium all come from. 
Tim
|
|
|
Fleaker
International Hazard
Posts: 1252
Registered: 19-6-2005
Member Is Offline
Mood: nucleophilic
|
|
Yeah, cinnabar (HgS)....safe, copper matte (arsenides are often present)...safe, pitcheblende....safe.
Typically anything found in the environment is the safest compound/form of that element you'll find.
I don't see what's so wrong with dumping it.
|
|
|
sparkgap
International Hazard
Posts: 1234
Registered: 16-1-2005
Location: not where you think
Member Is Offline
Mood: chaotropic
|
|
All right, so that we can end the discussion on whether barium sulfate is safe or not to dump, does anyone know its K<sub>sp</sub>
offhand?
As to the issue of forcing, radiologists usually give you choices: drink it (blech), or they force it up your arse (a.k.a. enema). 
It's not like they have more readily available radiopaques, you know...
"...Typically anything found in the environment is the safest compound/form of that element you'll find..."
Go tell that to the Bengalis who have to contend with arsenical well water... it's no wonder that they get tumors a bit more often than most.
"...pitchblende....safe..."
You don't suppose that Marie Curie dying from leukemia had absolutely nothing to do with her pitchblende experiments?
...but then again, pitchblende isn't exactly pure uranium/radium ore either...
sparky (~_~)
[Edited on 20-8-2005 by sparkgap]
"What's UTFSE? I keep hearing about it, but I can't be arsed to search for the answer..."
|
|
|
The_Davster
A pnictogen
Posts: 2861
Registered: 18-11-2003
Member Is Offline
Mood: .
|
|
| Quote: | Originally posted by sparkgap
You don't suppose that Marie Curie dying from leukemia had absolutely nothing to do with her pitchblende experiments?
|
The comment was that pitchblende was safe, not that the radium you get from extracting it from several tonnes of ore is.
Unless you extract radioactive elements from it it is quite safe.
|
|
|
12AX7
Post Harlot
Posts: 4803
Registered: 8-3-2005
Location: oscillating
Member Is Offline
Mood: informative
|
|
Well to be fair, the pitchblende was being refined, from tons down to what, half a gram...
Tim
|
|
|
Fleaker
International Hazard
Posts: 1252
Registered: 19-6-2005
Member Is Offline
Mood: nucleophilic
|
|
Pitchblende is safe, relatively speaking. Sure, when concentrated, refined, and ground into a powder, yes it can cause cancer. Hell, the granite
countertops in my kitchen increases the background radiation in my house by 40%.
It's all relevant to concentration of the radiation, and even more importantly of what type it is. I'd rather sit on a 5kg block of alpha
emitting uranium than have 5 grams of a sinister cesium isotope spewing out gamma radiation.
|
|
|
praseodym
Hazard to Others
Posts: 137
Registered: 25-7-2005
Location: Schwarzschild Radius
Member Is Offline
Mood: crazy
|
|
Well, places where pitchblende is exploited includes Katanga (Shaba) and Great Bear Lake, Canada. There are many other new localities but are a matter
of international concern instead.
Furthermore, it is not easy to find pure pitchblende. It is always oxidised to some degree and grades in composition towards U3O8, containing small
amounts of radium, thorium, and other rare elements. Radioactive disintegration gives rise to small quantities of lead and helium.
|
|
|
leu
Hazard to Others
Posts: 368
Registered: 13-10-2005
Member Is Offline
Mood: No Mood
|
|
The easiest and safest way to recycle mercury is by amalgamation; steel shavings work quite well if given enough time. Hydrogen sulfide is quite toxic
and also odorless; a bad combination to say the least 
|
|
|
Fleaker
International Hazard
Posts: 1252
Registered: 19-6-2005
Member Is Offline
Mood: nucleophilic
|
|
Odorless? Hardly (at least to me). I think you mean it loses its nasty rotten egg odor after you've over exposed yourself.
|
|
|
| Pages:
1
2 |
![[*]](images/xpblue/default_icon.gif){kind=icon}
