math
Hazard to Others
Posts: 114
Registered: 21-7-2006
Member Is Offline
Mood: No Mood
|
|
Storage under inert atmosphere in an argon-filled tub?
Hello, I'd like to store my rust-prone and oxidizing-prone collection of elements and essential oils in an argon-filled tub.
Do you think argon's density will be enough to keep it from escaping the tub and form a permanent layer on top of my items which will stay even if
from time to time I pick some up? Or would I need to top it up with argon each time?
Is polypropylene relatively impermeable to argon or would it diffuse thru it?
The tub's lid is just a normal lid, it is not gas or liquid-proof.
Is there some sort of indicator I'd leave, to indicate there is argon in the bottom 2/3 of the tub, like the floating tinfoil ship as seen is SF6
videos? I know that SF6 is a lot denser, but just wondering if there could be something similar I'd use as visual indicator.
Thank you
[Edited on 3-6-2025 by math]
|
|
|
bnull
National Hazard
Posts: 908
Registered: 15-1-2024
Location: East Woods
Member Is Offline
Mood: attacked by pain
|
|
You know that, if the elements and the essential oils are stored in inappropriate flasks, the oils will eventually diffuse into the element flasks and
possibly react with them, right?
You don't need to know if argon is still there at the bottom, but if there's oxygen there as well. You can buy oxygen indicators for book storage
(OxyEye is an example). They change color when oxygen goes above 0.05 or 0.5% (I forgot which one).
An alternative is to buy hermetically sealed flasks (I think jam jars with silicon gaskets will do), fill each with argon, carefully store the element
or essential oil flask (each one in a jar) so as not to disturb the gas, and top with argon. Close the jar. This way you will only disturb the gas in
the flask you open, not the whole tub.
Using a non leak proof box for storage is a bad idea to begin with, but it is none of my business if you do.
|
|
|
math
Hazard to Others
Posts: 114
Registered: 21-7-2006
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by bnull  | You know that, if the elements and the essential oils are stored in inappropriate flasks, the oils will eventually diffuse into the element flasks and
possibly react with them, right?
You don't need to know if argon is still there at the bottom, but if there's oxygen there as well. You can buy oxygen indicators for book storage
(OxyEye is an example). They change color when oxygen goes above 0.05 or 0.5% (I forgot which one).
An alternative is to buy hermetically sealed flasks (I think jam jars with silicon gaskets will do), fill each with argon, carefully store the element
or essential oil flask (each one in a jar) so as not to disturb the gas, and top with argon. Close the jar. This way you will only disturb the gas in
the flask you open, not the whole tub.
Using a non leak proof box for storage is a bad idea to begin with, but it is none of my business if you do. |
Thanks for the info. I will get some oxygen indicators as you suggested. About using a non leak proof box, it was more about the convenience of being
able to also lay papers, antiques etc flat in it, visualizing the tub's argon as if it was water in a container, so that aside from splashing caused
by opening the lid and putting hands in it, the higher density would keep it inside.
Maybe that was too naive of me, since I guess the density difference compared to air is not enough to have it settle in the tub.
|
|
|
BromicAcid
International Hazard
Posts: 3315
Registered: 13-7-2003
Location: Wisconsin
Member Is Offline
Mood: Rock n' Roll
|
|
The tub idea sounds fun in practice but probably will not be too practical. Gasses by their nature will expand to fill whatever container you put
them in, When it's sealed that's fine but when you open it, there will be eddies, mixing, diffusion, oxygen/air will diffuse into the argon and vice
versa. Your argon will become more and more contaminated and will make up less of the total volume. Again, love the idea but don't think it's going
to be as useful as you envision.
|
|
|
unionised
International Hazard
Posts: 5142
Registered: 1-11-2003
Location: UK
Member Is Offline
Mood: No Mood
|
|
"Do you think argon's density will be enough to keep it from escaping the tub "
No.
Gases mix.
Hydrogen sulphide is rather denser than air.
Noses are generally higher up than hindquarters.
Farts still stink.
Also gases like oxygen can diffuse through plastics so you might need a continuous purge of argon.
Metals or glass are a whole lot less permeable.
|
|
|
Dr.Bob
International Hazard
Posts: 2898
Registered: 26-1-2011
Location: USA - NC
Member Is Offline
Mood: Mildly disgruntled scientist
|
|
yes, Even argon filled glass slowly leaks. Glass and metal will work well, plastic leaks gases via permeation through it. Only a few plastics are
low permeable. That is why soda goes flat in plastic bottles quick compared to aluminum cans.
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
