bromosapien
Harmless
Posts: 15
Registered: 2-6-2024
Member Is Offline
|
|
(R-OH →) R-Cl → RH (one pot? amine presence?)
So, I've found a good bit of info already, especially the primary alcohol sn2 to halide, with Lucas catalyst in the case of Chloride... but
unfortunately almost every resource is geared entirely toward just teaching the mechanism to students, with zero experimental hints as far as ratios,
conditions, etc... so I'm hoping some of you nerds can give me some pointers.
Ideally I'd like to arrive at procedure that could work for amino alcohols from reduced amino acids. In theory I want to believe that I can just
protonate the amine in aq HCl, add another eq+ of HCl and some zinc to sn2 the primary OH to Cl, then add more zinc maybe more HCl, and reflux for a
while to reduce Cl to H. But my gut says in practice it's not going to be easy.
Does anyone have experience with any part of this? For any substrates, not just amino alcohols... A one-pot SN2 + reduction of primary OH would be
really cool. I just want a little info on what parts of the reaction may require water removal, large excess of one reagent over another... practical
tips on what to try.
I worry a little bit about the 'amino alkyl halide' polymerizing or forming the aziridine, although that is interesting and maybe useful in its own
right. But it seems that it should be possible to at least slow that down, or set it up so the zinc has a good chance of reducing it first.
[Edited on 28-2-2026 by bromosapien]
|
|
|
Alchemica
Harmless
Posts: 22
Registered: 31-5-2025
Member Is Offline
Mood: No Mood
|
|
Here's some info on Lucas Reagent and some preparative procedures that may be of interest to you
My [still learning, with plenty of room for improvement] personal opinion is that if the RX to RH reduction was in a sufficiently acidic medium to
keep the amine fully protonated eg -NH3+Cl-, the nucleophilicity of the amine would not be problematic enough to allow rapid aziridine formation
through easy nitrogen alkylation and as long as most RX is dehalogenated prior to work-up, may work? While things like Mg/iPrOH etc dehalogenations
[see: https://orgsyn.org/Content/pdfs/procedures/CV5P0998.pdf ] are seemingly great ways to remove halogens, I wonder if the non-acidic reaction mixture
might enhance risk of aziridine formation vs Zn/acid systems
 
Attachment: lucas reagent.pdf (3.1MB)
This file has been downloaded 11 times
|
|
|
bromosapien
Harmless
Posts: 15
Registered: 2-6-2024
Member Is Offline
|
|
Thank you Alchemica! That material is immensely helpful, exactly what I wanted!
The magnesium method also interests me, but I had the same concerns (I'm also very much "still learning...") because it essentially proceeds through
formation of a Grignard thing, yes? But that is definitely interesting and going directly to my PDF collection for later!
I'm curious what books those are from, and looking for book recommendations for this kind of information - I have no issues finding great educational
material for the theory, but I struggle to find good practical preparatory guides.
|
|
|
bnull
National Hazard
Posts: 993
Registered: 15-1-2024
Location: East Woods
Member Is Offline
Mood: Fecking annoyed
|
|
Take a look at the Library (link below in my signature).
|
|
|
Alchemica
Harmless
Posts: 22
Registered: 31-5-2025
Member Is Offline
Mood: No Mood
|
|
Most welcome. Sorry I saved screenshots that weren't properly referenced my end. Have a feeling the first pic was Norris (see pdf attached), while the
second was Weygand and Hilgetag Preparative Organic Chemistry but that's too big a pdf to attach here. Let me know via message if you have troubles
locating a pdf.
Vogel's Practical Organic Chemistry is definitely one to have on hand, too
Attachment: norris_experimental_organic_chemistry.pdf (1MB)
This file has been downloaded 7 times
|
|
|
bromosapien
Harmless
Posts: 15
Registered: 2-6-2024
Member Is Offline
|
|
Wonderful, thank you guys!
Something I have noticed is that these procedures always seem to call for anhydrous zncl2 even though they involve addition
of aqueous HCl... is that something I really need to pay special attention to?
I may actually be trying reduction of acids to alcohols with Zinc Borohydride (10.1021/jo00121a060), which definitely requires anhydrous ZnCl2 so I'll
be geting / making some anyway. But it's puzzling.
|
|
|
Alchemica
Harmless
Posts: 22
Registered: 31-5-2025
Member Is Offline
Mood: No Mood
|
|
Definitely anhydrous is the way to go, don't want to be diluting your reaction mixture to even lower [H+] and [Cl-] with hydrated ZnCl2. Mixing
anhydrous ZnCl2 with 36% HCl is very exothermic and evolves quite a bit of HCl gas, so ice bath cooling, stirring etc seem important.
I've seen NaBH4/I2 (think THF used as solvent) for simple, high yielding undergrad reductions of amino acids to amino alcohols, so don't neglect that
|
|
|
bromosapien
Harmless
Posts: 15
Registered: 2-6-2024
Member Is Offline
|
|
Hell yes. Thanks for the spoonfeeding-adjacent help, you have saved me so much time and given me a lot of fun reading!!!
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
