Flip
Hazard to Others
Posts: 116
Registered: 7-12-2005
Member Is Offline
Mood: No Mood
|
|
Ice jacket for condenser
Ok, so I thought of this remarkable invention today, only to realize that someone had beat me to the punch. My question is, where can I go about
obtaining ice jackets for my condensers. Even better, where could I find OTC ice packs of the right shape to fit the bill?
I thought that this idea might merit some discussion, as it may not be new to others here, but it's sure new to me.
|
|
|
MadHatter
International Hazard
Posts: 1338
Registered: 9-7-2004
Location: Maine
Member Is Offline
Mood: Enjoying retirement
|
|
Ice
What type of condenser is it ? If the condenser has its own jacket you could run ice water
through it using an aquarium pump. I've seen "blue-ice" packs sold in strips that could
be wrapped around the condenser if needed.
From opening of NCIS New Orleans - It goes a BOOM ! BOOM ! BOOM ! MUHAHAHAHAHAHAHA !
|
|
|
evil_lurker
National Hazard
Posts: 767
Registered: 12-3-2005
Location: United States of Elbonia
Member Is Offline
Mood: On the wagon again.
|
|
Man I'd just skip the ice jacket on the condensor... too messy.
For those extra tough condensing jobs, I just my mega 400mm double surface coil condensor I got offa ebay for like $70.
For cooling I use a $20 12 volt bait aerator I got at walmart as a pump (the one with the 1/2" pvc pipe going up to the spray cap... its essentially a
submersible 360GPH bilge pump). I just took off the aerator cap and stuck on a PVC to FPT fitting on top and screwed a nylon hose barb on it... no
glue needed. Works great and when your not using it in your lab it keeps yer minners nice and lively. An old cooler with a broken handle works great
for an ice water resevoir.
Last few times I just went out and bought like 4 bags of ice to do a run lasting 3-4 hours, but eventually I plan on cleaning out a shelf in my deep
freeze dedicated to making and storing ice blocks.
|
|
|
greenyppols
Hazard to Self
Posts: 97
Registered: 17-3-2005
Location: Behind you, watching intently, sexually tense.
Member Is Offline
Mood: Who's been messin' with my moods?
|
|
I had been thinking of using an small cube fridge. Put a 5 gallon jug of water with above pump installed, run a bulkhead fitting through the side of
the fridge, and it seems you'd be able to run all nite and day condensing whatever.
Of course I dont know the ability of water to absorb heat, the rate the fridge would cool, or if it'd be enough to cool it permanently.
I have the old fridge so its not like it'll cost me anything but I havent done it as I dont want to run a hole through it, only to find out it was a
good idea badly executed, ya know? And then be stuck with a holy fridge.
Any aquatic thermodynamic experts out there?
edit: I guess this could be a "rich"poor man's chiller?
[Edited on 9-9-2006 by greenyppols]
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
