nikotyna1939
Hazard to Self
Posts: 59
Registered: 26-9-2018
Location: reverse poland flag or nusantara
Member Is Offline
Mood: THINK 3R REDUCE REUSE RECYCLE
|
|
metallic container for corrosive chemicals
what kind of pure metal or alloys is the best for handling corrosive chemical like elemental halogens and mineral acids in any concentration at room
temperature.
also no noble metal please
i need to use metals because is cold conductive
[Edited on 14-3-2019 by nikotyna1939]
halogens like chlorine bromine and iodine
mineral acid like nitric HCL HBR and HI
[Edited on 14-3-2019 by nikotyna1939]
|
|
Sulaiman
International Hazard
Posts: 3684
Registered: 8-2-2015
Location: 3rd rock from the sun
Member Is Offline
|
|
Nothing is immune to everything so you will have to be more specific.
Off-hand I can't think of available metals that can contain aqua regia for example, but glass is inert to it - Hydrofluoric acid eats glass but not
plastic ........
CAUTION : Hobby Chemist, not Professional or even Amateur
|
|
fusso
International Hazard
Posts: 1922
Registered: 23-6-2017
Location: 4 ∥ universes ahead of you
Member Is Offline
|
|
It's unfortunate that Godnuclear fusion didn't make more noble metals for Earth, otherwise they'd have been cheaper
[Edited on 190313 by fusso]
|
|
RedDwarf
Hazard to Others
Posts: 166
Registered: 16-2-2019
Location: UK (North West)
Member Is Offline
Mood: Variable
|
|
You've a far too wide a range of materials - some acids can be handled in some grades of stainless steel at certain concentrations, Titanium is a
possibility for some acids/concentrations, but nothing metal will handle all the materials you've specified. I'm not sure why the container has to be
metal (for structural purposes?) and if you need that then perhaps look at glass coated steel vessels or plastic coated steel vessels, but again no
one coating will work for the complete range of materials you've specified.
|
|
Felab
Hazard to Self
Posts: 76
Registered: 9-11-2018
Member Is Offline
Mood: :dooM
|
|
A rhodium (or rhodium plated) container might hold almost all acids but will probably get destroyed with the halogens.
PTFE can hold up to almost everything but it is obviously not a metal.
Please be more specific.
|
|
woelen
|
Thread Moved 23-5-2019 at 11:41 |
draculic acid69
International Hazard
Posts: 1371
Registered: 2-8-2018
Member Is Offline
|
|
Teflon coated steel or aluminium is the only thing that stands up to all these but you would need a airtight lid to store that type of stuff.plastic
sounds like a better idea.
|
|
Sulaiman
International Hazard
Posts: 3684
Registered: 8-2-2015
Location: 3rd rock from the sun
Member Is Offline
|
|
A crystaline carbon RBF should fulfill all of the requirements mentioned - at STP.
CAUTION : Hobby Chemist, not Professional or even Amateur
|
|
draculic acid69
International Hazard
Posts: 1371
Registered: 2-8-2018
Member Is Offline
|
|
Crystaline carbon sounds like diamond.
|
|