jpsmith123
National Hazard
Posts: 764
Registered: 24-6-2005
Member Is Offline
Mood: No Mood
|
|
What's the approximate VOD of "Dynorex"?
I happened to come across the following video on youtube where "Dynorex" seemed to work quite well as a shaped charge:
https://www.youtube.com/watch?v=fce0vxVR4oo
Being curious, I tried to find some information about "Dynorex" particularly VOD, but all I found for a spec. was "> 4000 m/sec" varying with tube
diameter and temperature.
I don't have any personal experience with shaped charges but it seems to me that you'd need significantly more than 4000 m/sec to get the kind of
performance seen in the video, is that right?
|
|
|
MineMan
International Hazard
Posts: 1002
Registered: 29-3-2015
Member Is Offline
Mood: No Mood
|
|
I can’t find the TDS... but assuming it is an emulsion then no more than 6000. But there’s more to this test then meets the eye. Try to guess  ?
|
|
|
wessonsmith
Hazard to Others
Posts: 203
Registered: 15-2-2018
Location: elsewhere
Member Is Offline
|
|
Quote: Originally posted by jpsmith123  | I happened to come across the following video on youtube where "Dynorex" seemed to work quite well as a shaped charge:
https://www.youtube.com/watch?v=fce0vxVR4oo
Being curious, I tried to find some information about "Dynorex" particularly VOD, but all I found for a spec. was "> 4000 m/sec" varying with tube
diameter and temperature.
I don't have any personal experience with shaped charges but it seems to me that you'd need significantly more than 4000 m/sec to get the kind of
performance seen in the video, is that right?
|
VOD 3,000 - 6,000 m/s
https://www.oger.is/is/sprengiefni/dynorex
[Edited on 25-7-2019 by wessonsmith]
|
|
|
jpsmith123
National Hazard
Posts: 764
Registered: 24-6-2005
Member Is Offline
Mood: No Mood
|
|
Thanks for the info. From the (translated) data sheet:
"...sizes range from 22mm to 40mm in paper and from 43mm to 75mm in plastic patterns. Density of 1.35 kg / dm3 (22mm) and 1.45 kg / dm3 (50mm).
Explosion speed is from 3000 (22mm) to 6000 m / s (65mm) depending on the diameter of the cartridge."
So with the diameter and confinement used in this case VOD will be 6 km/sec and maybe somewhat higher.
[Edited on 25-7-2019 by jpsmith123]
|
|
|
MineMan
International Hazard
Posts: 1002
Registered: 29-3-2015
Member Is Offline
Mood: No Mood
|
|
There is more to it to that... the shape of martini glass... not the bottom part gives the hint.
|
|
|
markx
National Hazard
Posts: 646
Registered: 7-8-2003
Location: Northern kingdom
Member Is Offline
Mood: Very Jolly
|
|
Assuming the tail of the liqour vessel was not removed then it would have acted as a waveshaper behind the conical section. Seems to be pretty spot on
in terms of distance and shape too.....
Exact science is a figment of imagination.......
|
|
|
jpsmith123
National Hazard
Posts: 764
Registered: 24-6-2005
Member Is Offline
Mood: No Mood
|
|
I was just assuming that he broke the stem off of the glass and only used the conical part, as it seems to me that most people would not know about
wave shapers, or know enough about it to make an effective expedient one.
But let's say he used the base of the glass. Is it thick enough to help? I have no idea as my knowledge of the subject is very limited.
|
|
|
MineMan
International Hazard
Posts: 1002
Registered: 29-3-2015
Member Is Offline
Mood: No Mood
|
|
Good catch! I think it might be since emulsion is so insensitive! The base and the eye both help shape the wave....
|
|
|
Vomaturge
Hazard to Others
Posts: 286
Registered: 21-1-2018
Member Is Offline
Mood: thermodynamic
|
|
I am kind of surprised it's velocity is so close to that of an emulsion, seeing how it contains NC and NG, and its density and energy per unit mass
are each 20 to 30% more, at 1.4 g/cc and 4.4 kj/gm. I would have thought this 21st century take on Nobel's inventions would have 7km/sec at least.
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
