| Pages:
1
2 |
rstar
Hazard to Others
Posts: 138
Registered: 22-9-2011
Location: Besides valence shell
Member Is Offline
Mood: Dark
|
|
Science project - Oxidation states
Hi Geeks,
I have been trying to make a science project for my school science exhibition. As, I love Chemistry, i have decided to make a Science project named
'Oxidation State'.
In this project I have to describe oxidation state, its uses, its importance in chemistry and finally some experiments to prove the fact :
"Different elements at different oxidation state can have different properties" 
I have collected few compounds of elements at different OS, and they are:
= CuSO4 (Cu at +2 OS)
= CuI (Cu at +1 OS)
= MnO2 (Mn at +4 OS)
= KMnO4 (Mn at +7 OS)
= I2 (I at 0 OS)
= K2S2O5 (S at +4 OS)
= ZnCl2 (Zn at +2 OS)
Sorry, that much only 
<b>If you can, please give suggestions about :
>Importance and significance of OS
>Uses and problem regarding elements in their different OS.
(Like this fantastic use: Importance of Oxidation state in blood)
>any more compounds as example
>experiments to distinguish their OS </b>
"A tidy laboratory means a lazy chemist "
- Jöns Jacob Berzelius
|
|
|
bob800
Hazard to Others
Posts: 240
Registered: 28-7-2010
Member Is Offline
Mood: No Mood
|
|
You could also use "ferric" (+3) and "ferrous" (+2) compounds, like iron (II) chloride vs. iron (III) chloride. IIRC, potassium ferricyanide will give
a light blue solution with iron (II), and a dark blue solution with iron (III) (or vice-versa, I can't remember).
|
|
|
woelen
Super Administrator
Posts: 7977
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
One of the nicest experiments, demonstrating different oxidation states for a single experiment is the following:
http://woelen.homescience.net/science/chem/exps/vanadium/ind...
Here, vanadium is prepared in oxidation states +2, +3, +4 and +5, each oxidation state having its own very distinctive color. The chemicals needed for
this demo are easy to obtain (pottery suppliers and other fairly general chemicals).
Another experiment, which shows striking difference in oxidation states is simply making chlorine gas from chloride ions. You can do this by adding
some KMnO4 to 20% hydrochloric acid. The bubbles you obtain are pure chlorine gas. Even in a test tube you can see the greenish color of this gas and
you can show the exceptionally large difference between chloride ions (such as in table salt) and chlorine gas. Even better is making chlorine from
swimming pool 'chlorine' chemicals and hydrochloric acid.
Also very interesting is the use of oxidation states of silver in black and white photography. Ag(+) is reduced to Ag in the gelatin layer of black
and white photo-paper. Ag(+) is colorless and Ag is black, when very finely divided. The following web page from my website goes into detail about the
process of developing black and white images in photography:
http://woelen.homescience.net/science/photo/developers/index...
The following is an example which I found myself. I exploit the use of oxidation states in the process of making a so-called toner, based on vanadium
chemistry.
http://woelen.homescience.net/science/photo/toners/toner.pdf
There are numerous other examples of the use of redox chemistry and the effect of oxidation state on the properties of materials. I just mention some
of them, you can use google to find more info on them:
- etching of printed circuit boards for making electronics (uses oxidation of copper(0) to copper(II));
- making indigo dye (used for giving jeans a blue color) and the role of oxidation of indoxyl;
- burning of wood, plants, paper and so on is a redox reaction, with oxygen acting as oxidizer;
- electrolysis of water for making hydrogen and oxygen is a redox reaction at the electrodes of the electrolysis cell;
- use of very fast and energetic redox reactions in fireworks, with chlorates or perchlorates acting as oxidizer and metals, sulphur or other
flammable materials acting as reductor.
|
|
|
rstar
Hazard to Others
Posts: 138
Registered: 22-9-2011
Location: Besides valence shell
Member Is Offline
Mood: Dark
|
|
Sorry, no access to Vanadium 
Which one should be the most stable Iron(II) salt and how to distinguish it from any general Iron(III) salt, like FeCl3
"A tidy laboratory means a lazy chemist "
- Jöns Jacob Berzelius
|
|
|
watson.fawkes
International Hazard
Posts: 2793
Registered: 16-8-2008
Member Is Offline
Mood: No Mood
|
|
Have you
investigated pottery suppliers? Vanadium is a readily available as a glaze-making ingredient. Find one that deals with raw materials, not just
pre-formulated mixes.
|
|
|
bob800
Hazard to Others
Posts: 240
Registered: 28-7-2010
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by rstar  |
Which one should be the most stable Iron(II) salt and how to distinguish it from any general Iron(III) salt, like FeCl3
|
The sulfate is more stable than the chloride in the +2 state, but the +3 sulfate is not very soluble in water. If you want to do tests in aqueous
solutions, I would use the chlorides. They can be prepared by dissolving Fe in HCl (keeping an excess of iron to reduce any Fe+++). For the ferric
salt, bubble in some chlorine or simply let it sit in open air to oxidize.
As stated previously, ferricyanide/ferrocyanide can be used for this. More info here: http://www.lopezlink.com/Labs/Test_for_Iron_II_and_Iron_III_...
|
|
|
woelen
Super Administrator
Posts: 7977
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
This is not the case, ferric
sulfate is very soluble, but only the hydrated salt is. Anhydrous ferric sulfate hardly dissolves, but it SLOWLY becomes hydrated and while doing so
it does dissolve. Just try it. Put some ferric sulfate in water and swirl until you get a turbid liquid with the ferric sulfate finely suspended in
the water. Put the test tube aside and let it stand for a day or two days. After that period you'll see that all has dissolved. You can dissolve a lot
of ferric sulfate in water, but you need to be patient.
A similar effect exists for many other anhydrous chemicals. Anhydrous NiSO4 and VOSO4 take days to be hydrated and dissolved, but finally they
dissolve. CrCl3 is a similar story, it may take weeks or months to dissolve this (unless a strong reductor is present in catalytic amounts), but
finally it will dissolve and lots of this material can be dissolved in water.
[Edited on 2-11-11 by woelen]
|
|
|
White Yeti
National Hazard
Posts: 816
Registered: 20-7-2011
Location: Asperger's spectrum
Member Is Offline
Mood: delocalized
|
|
How about the oxidation states of chlorine? If you have access to some chlorate or perchlorate, you could demonstrate the reduction of chlorine from
+5 or +7 all the way down to -1.
I doubt that you have access to dichromates, but those usually go through some nice colour changes when they get reduced.
The cheapest/ easiest/ dirtiest way I can think of for demonstrating redox would be to take a solution of iron(II) acetate (colourless) and pour some
H2O2 into it. The iron III acetate formed is blood red and really obvious. If you do not have hydrogen peroxide, you can also try bleach. The down
side is that bleach yields a messy precipitate of iron hydroxide.
"Ja, Kalzium, das ist alles!" -Otto Loewi
|
|
|
Steve_hi
Hazard to Others
Posts: 196
Registered: 4-12-2010
Member Is Offline
Mood: No Mood
|
|
I got these results with KMnO4 .0001M
[img]C:\Users\Public\Pictures\steve chemistry\2.jpg[/img]
|
|
|
rstar
Hazard to Others
Posts: 138
Registered: 22-9-2011
Location: Besides valence shell
Member Is Offline
Mood: Dark
|
|
Colorful demonstrations of OS in Manganese include:
KMnO4 = Mn in +7 OS, having Purple color
K2MnO4 = Mn in +6 OS, having Green color
MnO2 = Mn in +4 OS, having Black color, insoluble in Water
MnSO4 = Mn in +2 OS, having pale Pink color,
But, can anyone tell me how to make a Mn<sup>2+</sup> salt using KMnO4 as starting chemical ??? 
"A tidy laboratory means a lazy chemist "
- Jöns Jacob Berzelius
|
|
|
woelen
Super Administrator
Posts: 7977
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
Almost any reductor does the job. E.g. dissolve KMnO4 in a solution of sodium hydroxide and add some ethanol. A precipitate of hydrous MnO2 is formed.
Filter this precipitate and rinse very well to get rid of almost all sodium ions. Then add this precipitate to hydrochloric acid to which some ethanol
is added as well. Heat the liquid. The precipitate dissolves and the ethanol reduces it to nearly colorless Mn(2+). Then evaporate the liquid and
drive off all ethanol and acid and what remains is fairly pure MnCl2. If you want to have it really pure, then redissolve the solid in as little as
possible boiling water to which one drop of hydrochloric acid is added and allow to cool and allow water to evaporate slowly. You'll get pure
MnCl2.4H2O, a pink solid.
If you are happy with a mix of KCl and MnCl2 then things can be much easier. Just add solid KMnO4 to hydrochloric acid to which also some ethanol is
added. Allow all of the KMnO4 to be dissolved. A nearly colorless solution is obtained. Boil off the acid and excess ethanol. A pale pink mix of KCl
and MnCl2 remains.
|
|
|
rstar
Hazard to Others
Posts: 138
Registered: 22-9-2011
Location: Besides valence shell
Member Is Offline
Mood: Dark
|
|
I will be happy, if it has the same color as MnCl2.4H2O
How about oxidation states of Zinc ??
The most 'easy to obtain' zinc salt for me is ZnSO4 in which Zn is in +2 OS. How about its +1 OS ??
"A tidy laboratory means a lazy chemist "
- Jöns Jacob Berzelius
|
|
|
woelen
Super Administrator
Posts: 7977
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
Zinc does exist in oxidation state +1. It exists as metal and as divalent ion.
A mix of potassium chloride and manganese chloride is pale pink, just somewhat more pale than pure manganese chloride, due to the white color of
potassium chloride.
|
|
|
Ozone
International Hazard
Posts: 1269
Registered: 28-7-2005
Location: Good Olde USA
Member Is Offline
Mood: Integrated
|
|
I did a very nice series by titrating KMnO4(aq) with Na2S2O5 drop-by-drop with a buret. IIRC, I was able to observe, in reverse order, that: 2+ =
pink, 3+ = purple, 4+ = brown, 5+ = blue (quite an incredible color, but unstable, and it must be observed/photographed quickly before it is oxidized
by air to give...), 6+ which is a brilliant green and, of course, the bright purple pink of permangate, 7+.
I love this one,
O3
-Anyone who never made a mistake never tried anything new.
--Albert Einstein
|
|
|
rstar
Hazard to Others
Posts: 138
Registered: 22-9-2011
Location: Besides valence shell
Member Is Offline
Mood: Dark
|
|
How could Zinc in +1 OS be obtained ?
I know one way !
Dissolving Zinc in molten ZnCl2 gives, Zn2Cl2 or Zinc(I) Chloride, containing the divalent Zn<sub>2</sub><sup>2+</sup> ion.
Is there any other way ?
(And by "other way" I mean a process, not containing any molten Zinc(II) halide )
[Edited on 6-11-2011 by rstar]
"A tidy laboratory means a lazy chemist "
- Jöns Jacob Berzelius
|
|
|
rstar
Hazard to Others
Posts: 138
Registered: 22-9-2011
Location: Besides valence shell
Member Is Offline
Mood: Dark
|
|
Aluminum compounds can be obtained in +3 OS only. They are white salts, which form colorless aqueous solutions. Is their any test for presence
Aluminum ions, and to differentiate it from Zinc(II) ions ??
"A tidy laboratory means a lazy chemist "
- Jöns Jacob Berzelius
|
|
|
francis
Hazard to Self
Posts: 72
Registered: 1-4-2011
Location: Australia
Member Is Offline
Mood: No Mood
|
|
You could dissolve the soluble Zn(II) and Al(III) salts in water (in separate test tubes), add NaOH solution to both until white precipitates are
visible: Al(OH)3 and Zn(OH)2
Now, add excess ammonia (NH3) to both tubes:
You will find the Al(OH)3 will stay visible as a precipitate in the tube.
Zn(OH)2 however, will disappear owing to the displacement of aqua ligands by ammine ligands (formation of [Zn(NH3)4]2+).
|
|
|
White Yeti
National Hazard
Posts: 816
Registered: 20-7-2011
Location: Asperger's spectrum
Member Is Offline
Mood: delocalized
|
|
| Quote: Originally posted by francis | You could dissolve the soluble Zn(II) and Al(III) salts in water (in separate test tubes), add NaOH solution to both until white precipitates are
visible: Al(OH)3 and Zn(OH)2
Now, add excess ammonia (NH3) to both tubes:
You will find the Al(OH)3 will stay visible as a precipitate in the tube.
Zn(OH)2 however, will disappear owing to the displacement of aqua ligands by ammine ligands (formation of [Zn(NH3)4]2+).
|
Careful...
In both cases, if you add too much base you will form aluminium and zinc ligands [Al(OH)4]- and [Zn(OH)4]-2 respectively; both of which are soluble.
"Ja, Kalzium, das ist alles!" -Otto Loewi
|
|
|
rstar
Hazard to Others
Posts: 138
Registered: 22-9-2011
Location: Besides valence shell
Member Is Offline
Mood: Dark
|
|
Any example of Zinc(I) ??
"A tidy laboratory means a lazy chemist "
- Jöns Jacob Berzelius
|
|
|
ScienceSquirrel
International Hazard
Posts: 1863
Registered: 18-6-2008
Location: Brittany
Member Is Offline
Mood: Dogs are pets but cats are little furry humans with four feet and self determination!
|
|
As far as I know the answer is no.
Cd(I) and Hg(I) are bications with a metal metal bond eg M2 2+ where M is Hg or Cd.
The mercury species is a lot more stable than the cadmium species and I doubt the zinc ion exists at all or only fleetingly.
|
|
|
rstar
Hazard to Others
Posts: 138
Registered: 22-9-2011
Location: Besides valence shell
Member Is Offline
Mood: Dark
|
|
Here is a Wikipedia page, on which I saw something about Zinc(I). I think it does exist.
"A tidy laboratory means a lazy chemist "
- Jöns Jacob Berzelius
|
|
|
JustMe
Hazard to Others
Posts: 111
Registered: 7-8-2003
Member Is Offline
Mood: No Mood
|
|
While not as interesting or dramatic (colorful) as the different oxidation states of the transitional metals, an interesting and very easy to make
compound is Sodium Tetrathionate wherein the Sulfur exists in two oxidation states. I only mention this because I remember it as one of my earliest
experiments using easy to get chemicals.
http://en.wikipedia.org/wiki/Tetrathionate
Chromium is another possibility, as in Chromate/Dichromate (+6), Chrome Alum (+3). The reason I said Chrome Alum is that it is probably easier to
get/crystalize than most Chromium III compounds.
|
|
|
woelen
Super Administrator
Posts: 7977
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
I just ordered some anhydrous ZnCl2 from an eBay seller and when this arrives, then I'll add some zinc to this and heat the mixture. I never heard of
this Zn(I) compound. Isn't it simply zinc metal dissolved in ZnCl2? On the other hand, if it really is yellow, then it hardly can be metallic and then
it could be a zinc(I) compound.
|
|
|
rstar
Hazard to Others
Posts: 138
Registered: 22-9-2011
Location: Besides valence shell
Member Is Offline
Mood: Dark
|
|
| Quote: Originally posted by woelen |
I just ordered some anhydrous ZnCl2 from an eBay seller and when this arrives, then I'll add some zinc to this and heat the mixture. I never heard of
this Zn(I) compound. Isn't it simply zinc metal dissolved in ZnCl2? On the other hand, if it really is yellow, then it hardly can be metallic and then
it could be a zinc(I) compound. |
I have never tried it. My Hydrochloric acid is finished, so i couldn't make any ZnCl2 .
If you get the right results then, you can post this experiment in your website, might be a new hit
"A tidy laboratory means a lazy chemist "
- Jöns Jacob Berzelius
|
|
|
ScienceSquirrel
International Hazard
Posts: 1863
Registered: 18-6-2008
Location: Brittany
Member Is Offline
Mood: Dogs are pets but cats are little furry humans with four feet and self determination!
|
|
I stand corrected. I should have looked it up. It is what I would call a spectroscopic species and I suspect that adding water to the yellow glass
will result is zinc metal or zinc hydroxide plus a solution of zinc chloride.
|
|
|
| Pages:
1
2 |
![[*]](images/xpblue/default_icon.gif){kind=icon}
