RonPaul2012
Hazard to Self
Posts: 89
Registered: 29-2-2012
Member Is Offline
Mood: No Mood
|
|
Merits of a milligram scale.
I am looking to add a milligram scale to my collection , I am interested in knowing the merits of a milligram scale as opposed to a centigram scale.
I already have these scales http://www.myweigh.com/ibalancem01.html
http://www.myweigh.com/440z.html .
But I really want one of these or maybe something cheaper , any suggestions ?
http://www.myweigh.com/gempro.html
http://www.myweigh.com/ibalance211.html .
I would use these to determine liquid density and for fine syntheses .
What do you guys think ?
[Edited on 12-3-2012 by RonPaul2012]
|
|
|
bahamuth
Hazard to Others
Posts: 384
Registered: 3-11-2009
Location: Norway
Member Is Offline
Mood: Under stimulated
|
|
If you want milligram scales buy a decent one, like Mettler, Sartorius and the like with a resolution of 0.1mg since only those are usable for density
IMO. Ebay is a good place and you might get a good deal there but even using 400-800 USD on a balance you will have for the rest of your life and with
a good resale price if you want to get rid of it is not so bad.
I myself don't have a milligram scale at home but have been working with several and it is really a pleasure working with those compared to the 0.01
gram resolution I have now (feels like working on industrial scale, additionally the minimal chemical costs can be felt when working in millimolar
range), if I had 1000 USD to spare a good balance would be my first investment..
Any sufficiently advanced technology is indistinguishable from magic.
|
|
|
zoombafu
Hazard to Others
Posts: 255
Registered: 21-11-2011
Location: U.S.
Member Is Offline
Mood: sciencey
|
|
This would be especially good for organic synthesis, as often you are working with tiny amounts of reagents. I agree with bahamuth that you should go
for a high end scale. Make sure that it has a .001g resolution, otherwise it just isn't worth it.
|
|
|
RonPaul2012
Hazard to Self
Posts: 89
Registered: 29-2-2012
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by zoombafu  | | This would be especially good for organic synthesis, as often you are working with tiny amounts of reagents. I agree with bahamuth that you should go
for a high end scale. Make sure that it has a .001g resolution, otherwise it just isn't worth it. |
I really
don't want to drop more than $100 on another scale (as critical as it is)
http://homegardenoutdoors.com/product/30890_American-Weigh-G...
Do you think this one is good ?
|
|
|
zoombafu
Hazard to Others
Posts: 255
Registered: 21-11-2011
Location: U.S.
Member Is Offline
Mood: sciencey
|
|
Can you repost the link, it isn't working for me. It will be awfully hard to find a milligram scale that is actually accurate for that price.
|
|
|
bob800
Hazard to Others
Posts: 240
Registered: 28-7-2010
Member Is Offline
Mood: No Mood
|
|
You could always get lucky and have that scale work perfectly for you, but scales are usually cheap for a reason. I paid $100 for a My-Weigh centigram
scale; I don't see how you could get an accurate milligram scale for the same price.
If money is such an issue, then I'd recommend looking on eBay like bahamuth suggested. Buying a used quality-brand scale is usually a better option
than buying a new cheapo scale.
|
|
|
RonPaul2012
Hazard to Self
Posts: 89
Registered: 29-2-2012
Member Is Offline
Mood: No Mood
|
|
| Quote: Originally posted by zoombafu |
Can you repost the link, it isn't working for me. It will be awfully hard to find a milligram scale that is actually accurate for that price.
|
The reviewer said that this scale checked out with a HQ milligram scale and it was great.
Sadly this scale only does 20 grams , which is not going to work for me , because the 10ml graduated cylinder that I use weighs more than 20 grams
 .
It's not that money is an issue , it's just that I like to be smart about my purchases (especially when it comes to this amazing hobby) , but I will
definitely look around
[Edited on 13-3-2012 by RonPaul2012]
|
|
|
neptunium
National Hazard
Posts: 986
Registered: 12-12-2011
Location: between Uranium and Plutonium
Member Is Offline
|
|
i have a denver XE50 it goes to 0.0001g to 50 g. i think i paid about 300$ on ebay some years ago.
I took it to a scale and standart weight lab and they told me it was accurate.
I`ve been very satisfy with it so far and i am sure you can find one on ebay as well
|
|
|
RonPaul2012
Hazard to Self
Posts: 89
Registered: 29-2-2012
Member Is Offline
Mood: No Mood
|
|
Anybody have experience with this scale ?
http://www.oldwillknottscales.com/my-weigh-gempro-250.html
|
|
|
MyNameIsUnnecessarilyLong
Hazard to Self
Posts: 71
Registered: 12-7-2010
Member Is Offline
Mood: No Mood
|
|
I've seen many nice digital Sartorius/Acculab/Mettler .001g scales on ebay sold for roughly the same price as that one. I really recommend buying used
equipment whenever you can.
I just saw a nice Sartorius BP110 sell for $150: http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&_trksid=p4...
Browse this section on Ebay every day and have it set to sort by "ending soonest" then look for open auctions:
http://www.ebay.com/sch/Lab-Scales-Balances-/48724/i.html
Always bid at the last 10-20 seconds of an auction so everyone isn't haphazardly one-upping each other and significantly raising prices.
|
|
|
paparev
Harmless
Posts: 3
Registered: 16-6-2005
Member Is Offline
Mood: struggling
|
|
I've found lower-priced precision scales that weigh in the milligram range are those marketed to people who reload their own ammunition to measure out
the proper amount of gunpowder per cartridge. Given the nature of the activity, these scales are reliably accurate and precise as well as dependable
over time. Yet they are often cheaper than ones from lab supply places.
Some years ago, I got a great little beam scale made by a company called "Dillon" (I think). Although it measured in grains, it's no big deal to
convert to milligrams and the electronic, digital ones read out in grains, grams, carats, or whatever else you want.
|
|
|
Swede
Hazard to Others
Posts: 491
Registered: 4-9-2008
Member Is Offline
Mood: No Mood
|
|
This is something I've been looking at as well. To find a milligram scale that actually repeats seems to be a very expensive task.
I tried one of the cheap scales. If you weigh something small, and attempt to repeat, you'll get a series like 1.562g, 1.564g, 1.561g, etc, meaning
the milligram digit is a lame best guess. And I've never understood the "pocket" milligram scales out there. Unless I am missing something , you
shove what should be a delicate device in your pocket and go banging around the hood, the mechanism isn't going to survive very long.
I'd like to find something that works and doesn't cost $700. And I don't need a 300 gram top end, even 20g x 0.001g would thrill me, so long as the
stupid thing is accurate.
A "grain" scale doesn't help much considering a grain is something like 65 milligrams, so even a tenth of a grain accuracy isn't the same as milligram
accuracy.
|
|
|
Hexavalent
International Hazard
Posts: 1564
Registered: 29-12-2011
Location: Wales, UK
Member Is Offline
Mood: Pericyclic
|
|
| Quote: Originally posted by Swede | And I've never understood the "pocket" milligram scales out there. Unless I am missing something , you shove what should be a delicate device in your
pocket and go banging around the hood, the mechanism isn't going to survive very long.
|
I think the word 'pocket' refers to their small size, i.e. they would fit into your pocket.
Actually, coming to think of it, drug dealers and the like would probably carry them around in their pockets.
"Success is going from failure to failure without loss of enthusiasm." Winston Churchill
|
|
|
Swede
Hazard to Others
Posts: 491
Registered: 4-9-2008
Member Is Offline
Mood: No Mood
|
|
I'm pretty sure the druggies do in fact use these things on the street... not so much the milligram scales, but the more typical 0 to 500g jobs.
Since I made that previous post, I looked hard, and any milligram scale that costs less than about $400 may have a resolution of 0.001g, but the
accuracy is going to be +/- 0.002g or so. It's either big bucks, or take a gamble on eBay, and even those aren't cheap.
For typical hobby use, one of the $40 "jewelry" milligram scales is going to be better than nothing if you need to get to within 0.003 grams or so.
My main scale is a 0.01g VMC, not a top-end scale but plenty good enough.
I do have a mechanical powder scale, 1950's vintage. I need to dust it off and see what it is capable of doing.
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
