Sciencemadness Discussion Board
Not logged in [Login ]
Go To Bottom

Printable Version  
Author: Subject: Help needed re: metals or compounds that glow
Papa Smoke
Harmless
*




Posts: 2
Registered: 16-6-2012
Member Is Offline

Mood: No Mood

shocked.gif posted on 16-6-2012 at 05:14
Help needed re: metals or compounds that glow


I have recently come across a problem I wish to solve. I am trying to find a metal, mineral, or compound that will glow very brightly when flame is applied but will NOT vaporize rapidly. It must be able to be formed into various shapes or rods. It must be stable, safe, and non-toxic before, during, and after the application of flame/heat.

In which forum subsection would I best be served asking about this?

Thanks for your help. I will check back later but for now, I will go back to doing what I do best. Griping at my college students!

[Edited on 16-6-2012 by Papa Smoke]
View user's profile View All Posts By User
plante1999
International Hazard
*****




Posts: 1936
Registered: 27-12-2010
Member Is Offline

Mood: Mad as a hatter

[*] posted on 16-6-2012 at 05:28


Calcium oxide with a glassing on top?



I never asked for this.
View user's profile View All Posts By User
Wizzard
Hazard to Others
***




Posts: 337
Registered: 22-3-2010
Member Is Offline

Mood: No Mood

[*] posted on 16-6-2012 at 06:09


SiC fibers COULD be used, like whiskers, but you'd need to protect them from any physical contact- They are VERY thin!
http://en.wikipedia.org/wiki/Thin_filament_pyrometry
View user's profile View All Posts By User
Zan Divine
Hazard to Others
***




Posts: 170
Registered: 3-12-2011
Location: New York
Member Is Offline

Mood: Wishing all the worst that life has to offer to that SOB Wayne Lapierre

[*] posted on 16-6-2012 at 07:00


Molybdenum disilicide?

There are many commercial suppliers of formed "Moly DiSi"
heating elements. Therefore fabrication problems have already been addressed. These operate @ 1700 C in furnaces and are resistant to oxidation. They are costly, however.

Since the criteria you specify are grossly similar to those of the heating element industry (ability to form into thin cross-sectional forms and ability to operate in a region where blackbody radiation means things glow), this is a good area to mine.

As to metal options, you can purchase platinum coated tungsten wire commercially. It resists oxidation very well and tolerates very high temps. If your needs are not that demanding, there are any number of cheaper resistance heating formulations.

[Edited on 16-6-2012 by Zan Divine]




He who makes a beast of himself gets rid of some of the pain of being a man. --HST

View user's profile View All Posts By User
chornedsnorkack
National Hazard
****




Posts: 563
Registered: 16-2-2012
Member Is Offline

Mood: No Mood

[*] posted on 17-6-2012 at 03:23


Among metals, the highest temperature tolerance in air or oxidizing flame is iridium - the only metal that endures over 2000 Celsius. All transition metals from tantalum to osmium form volatile oxides, and platinum melts at 1750 Celsius.

Among oxides, high melting point is possessed by, e. g. thoria, zirconia, ceria, magnesia, quicklime. These are generally brittle, though, so they may be vulnerable to crumbling away.
View user's profile View All Posts By User
dann2
International Hazard
*****




Posts: 1523
Registered: 31-1-2007
Member Is Offline

Mood: No Mood

[*] posted on 17-6-2012 at 05:39



Plant1999 Suggested using the 'lime light' as it was called when used way back in the day for stage shows.
Sounds like a good solution.
View user's profile View All Posts By User
phlogiston
International Hazard
*****




Posts: 1379
Registered: 26-4-2008
Location: Neon Thorium Erbium Lanthanum Neodymium Sulphur
Member Is Offline

Mood: pyrophoric

[*] posted on 17-6-2012 at 15:01


Zinc oxide and cerium oxide also exhibit 'candoluminesence', like CaO.

Thorium oxide is well known for its use in gass mantles, but it also radioactive and therefore doesn't match your requirements.




-----
"If a rocket goes up, who cares where it comes down, that's not my concern said Wernher von Braun" - Tom Lehrer
View user's profile View All Posts By User
Papa Smoke
Harmless
*




Posts: 2
Registered: 16-6-2012
Member Is Offline

Mood: No Mood

[*] posted on 17-6-2012 at 16:23


Thanks all! Wow! I have LOTS of experimenting to do (some of it quite expensive!!)

I am trying to find the wire, etc. that glows the brightest and is destroyed the slowest by fire.

Should be great fun!!!;)
View user's profile View All Posts By User
Neil
National Hazard
****




Posts: 556
Registered: 19-3-2008
Member Is Offline

Mood: No Mood

[*] posted on 18-6-2012 at 04:43


Yitrium oxide and MgO from heated MgSO4 work well.

A wire? Platinum.
View user's profile View All Posts By User
RadioTrefoil
Harmless
*




Posts: 16
Registered: 11-7-2012
Location: New Zealand
Member Is Offline

Mood: Inert

[*] posted on 18-7-2012 at 00:26


Platinum wire! Heat it up and then dangle it over a flask with ammonia solution in the bottom, it will glow bright red hot for ages and will not be damaged AT ALL because it is acting as a catalyst for oxidation of the ammonia gas. It will only stop glowing when there is no more ammonia or oxygen left.



MESITYL FREAKING OXIDE
View user's profile Visit user's homepage View All Posts By User
barley81
Hazard to Others
***




Posts: 481
Registered: 9-5-2011
Member Is Offline

Mood: No Mood

[*] posted on 18-7-2012 at 04:21


The mineral fluorite (CaF<sub>2</sub>;) is thermoluminescent and glows when heated. It is safe, non-toxic, and stable; however, it cannot easily be formed into shapes. A jeweler may be able to take large crystals and grind them down to the shape you want.

EDIT: this happens if the fluorite has been exposed to ionizing radiation. The energy is released when the fluorite is heated.

[Edited on 18-7-2012 by barley81]
View user's profile View All Posts By User
polymerizer87
Harmless
*




Posts: 35
Registered: 16-7-2012
Member Is Offline

Mood: No Mood

[*] posted on 18-7-2012 at 08:34
Fireflies


Look up "luciferin" the compound in fireflies that makes them glow. Not sure how you would synthesize this considering it's an enzymatic process.
View user's profile View All Posts By User

  Go To Top