metalresearcher
National Hazard
Posts: 731
Registered: 7-9-2010
Member Is Offline
Mood: Reactive
|
|
Homemade glassware rack
From local hardware store parts (a shelf of wood and a 16mm diameter wooden stick I made myself a labware rack. After cleaning the inside can dry
easily.
The center one of the two test tubes (a borosilicate one) is attacked by KNO3 to remove the carbon remainders after I heated it to 600ºC to pyrolyze
wood.
[Edited on 2012-12-3 by metalresearcher]
|
|
|
99chemicals
Hazard to Others
Posts: 174
Registered: 24-3-2012
Location: In the Octet
Member Is Offline
Mood: No Mood
|
|
The second from the left, is that a condenser?
The problem I can see is that the posts are a bit smaller than the necks which may not allow good ventilation.
You may want to put some polyurethane on on the wood to keep the wood from absorbing water.
Looks like a good design.
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
