testimento
Hazard to Others
Posts: 351
Registered: 10-6-2013
Member Is Offline
Mood: No Mood
|
|
Sugar(fermentable goods) from cellulose?
I heard that it is possible to make short chained carbohydrates from wood by boiling them long enough. Another method was to use sulfuric acid to
ferment food: Some 100-150kg was needed to produce over one ton of sugar-like substance.
|
|
|
Metacelsus
International Hazard
Posts: 2532
Registered: 26-12-2012
Location: Boston, MA
Member Is Offline
Mood: Double, double, toil and trouble
|
|
This is a blatant violation of conservation of mass. Where did you find this information?
|
|
|
Magpie
lab constructor
Posts: 5939
Registered: 1-11-2003
Location: USA
Member Is Offline
Mood: Chemistry: the subtle science.
|
|
I think he means the amount of acid required.
FYI - an edited extract from: http://www.sandyhershelman.com/alcoholplanthistory.htm
From 1911 to 1913, the Classen Chemical Company made alcohol out of sawdust at a plant built at the southern tip of Port Townsend Bay, WA.
Classen made its alcohol using a French distilling process known as the Bergius Process.
Wood waste, shredded into chips, was dried in a steam dryer until it contained no more than one percent moisture. The wood was mixed with cold 40
percent hydrochloric acid. The cellulose was converted to glucose, and the lignin extracted.
Through evaporation, the acid was also recovered and reused. Fresh supplies of the acid were made in stone tanks from salt and sulfuric acid.
Special yeast, grown in the plant, was added to the fermentation tank housing the glucose-rich wood solution.
When the "beer" was ready, the eight-percent-alcohol solution was moved from the beer well and entered the distillation stage. This distillation
yielded 190-proof ethyl alcohol. The neighboring cattle also benefited: the spent wort was used for feed.
The single most important condition for a successful synthesis is good mixing - Nicodem
|
|
|
Metacelsus
International Hazard
Posts: 2532
Registered: 26-12-2012
Location: Boston, MA
Member Is Offline
Mood: Double, double, toil and trouble
|
|
Oops, sorry for the confusion. I thought you meant 100-150 kg of cellulose. Yes, I have heard of acid-catalyzed hydrolysis of cellulose:
http://www.eng.umd.edu/~nsw/ench485/lab4.htm
https://en.wikipedia.org/wiki/Acid_hydrolysis
http://www.google.com/patents/US4174976
The hydrolysis is usually done with dilute sulfuric acid.
|
|
|
Fantasma4500
International Hazard
Posts: 1677
Registered: 12-12-2012
Location: Dysrope (aka europe)
Member Is Offline
Mood: dangerously practical
|
|
interesting, been wondering for some time where the cellulose went then conc. H2SO4 was added to it, by logic it wouldnt just disappear without any
type of decomposition etc.
first carbonised, thereafter nowhere to be found
since dilute acids are used, i wonder if concentrated acids could yield a different compound, speed up the reaction overall or totally ruin it?
|
|
|
Adas
National Hazard
Posts: 711
Registered: 21-9-2011
Location: Slovakia
Member Is Offline
Mood: Sensitive to shock and friction
|
|
Quote: Originally posted by Antiswat  | interesting, been wondering for some time where the cellulose went then conc. H2SO4 was added to it, by logic it wouldnt just disappear without any
type of decomposition etc.
first carbonised, thereafter nowhere to be found
since dilute acids are used, i wonder if concentrated acids could yield a different compound, speed up the reaction overall or totally ruin it?
|
Concentrated acids would just carbonize it.
Rest In Pieces!
|
|
|
hyfalcon
International Hazard
Posts: 1003
Registered: 29-3-2012
Member Is Offline
Mood: No Mood
|
|
Isn't 40% HCl above the concentration of the azotrope?
|
|
|
Random
International Hazard
Posts: 1018
Registered: 7-5-2010
Location: In ur closet
Member Is Offline
Mood: Energetic
|
|
i want pure lignin, in which form is it present after wood hydrolysis?
Would 18 percent HCl be sufficient?
|
|
|
Agricola
Harmless
Posts: 42
Registered: 28-10-2013
Location: Brazil
Member Is Offline
Mood: No Mood
|
|
Attached to this post is a paper on the preparation of alcohol from grass. The cellulose of grass is converted by the enzyme cellulase to glucose
which is then fermented to alcohol.
You can read about cellulase here.
Attachment: alcohol_epstein2010.pdf (600kB)
This file has been downloaded 642 times
|
|
|
Ozone
International Hazard
Posts: 1269
Registered: 28-7-2005
Location: Good Olde USA
Member Is Offline
Mood: Integrated
|
|
Dilute acid will not work with whole biomass or crystalline cellulose. Strong acid such as quenched sulfuric (72%) or supersaturated HCl are required
(they dissolve HCl gas into cold 36-38% acid to 40-42% and keep it cold under pressure in a reactor). The acid is extracted or otherwise removed for
recycling. Once the primary hydrolysis is complete, the liquor is strained from the lignin (which is washed to remove residual acid) and the mixture
of glucose and higher DPs is subject to a secondary hydrolysis, usually with dilution and high heat, say 120°C. The result is a mixture of sugars
with DP 1 >90 %.
This mixture us then refined and evaporated to give a fermentable product.
Although not required for strong acid hydrolysis, pretreatment can be done to remove the hemicellulosic sugars prior to hydrolysis. This is usually
done with dilute acid at high temperature under pressure. The hemicellulose depolymerizes, but the cellulose does not.
Personally, I'd pretreat it with NaOH, wash it well, and saccharify it with a cellobiase-cellulase cocktail.
But that's just me.
Cheers,
O3
[Edited on 2-11-2013 by Ozone]
-Anyone who never made a mistake never tried anything new.
--Albert Einstein
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
