shaheerniazi
Hazard to Self
Posts: 70
Registered: 25-11-2013
Location: Pakistan
Member Is Offline
Mood: radioactive
|
|
sodium hypochlorite and acetone?
It is written on the internet that calcium hypochlorite reacts with acrtone to produce chloroform, what will happen if I use except calcium
hypochlorite, sodium hypochlorite?
|
|
|
woelen
Super Administrator
Posts: 7977
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
With sodium hypochlorite you also get chloroform, but if you use plain 4% household bleach, then the solution will be very dilute and most of the
chloroform remains dissolved in the water of the bleach.
You need a distillation setup to get a decent yield. If you search sciencemadness (use google with your search terms such as "bleach chlororoform",
combined with the text site:*.sciencemadness.org) you will find a lot of information on this subject.
|
|
|
shaheerniazi
Hazard to Self
Posts: 70
Registered: 25-11-2013
Location: Pakistan
Member Is Offline
Mood: radioactive
|
|
Thanks, but chloroform is not so soluble in water, only 0.8g/100ml of water at 20C?
|
|
|
woelen
Super Administrator
Posts: 7977
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
Indeed, its solubility is quite low, but now so low that it does not dissolve at all. The reaction between bleach and acetone does give some
chloroform, which settles as a blob of liquid at the bottom, but it only is a small one.
If you want to see it, then take 100 ml of undiluted bleach and slowly, while stirring, add a few ml of acetone (not more, just a few ml). The liquid
will turn turbid and if you wait for some time, you will see a little blob of liquid. Some of the chloroform will be destroyed also while in solution.
Chloroform fairly easily hydrolyses to sodium formiate and sodium chloride in alkaline solution and in the presence of excess bleach, the formate is
easily oxidized further to carbonate ion. This side reaction leads to an additional loss. Especially the loss of bleach in the oxidation of formiate
leads to even more dilution. The colder your solution, the better the yield, hence the need of good stirring and slow addition of acetone. This avoids
strong local heating of the liquid.
|
|
|
shaheerniazi
Hazard to Self
Posts: 70
Registered: 25-11-2013
Location: Pakistan
Member Is Offline
Mood: radioactive
|
|
So I should keep it in a ice bath for cooling and if even some sodium formiate forms and the turns into sodium carbonate, how can we seperate that?
|
|
|
woelen
Super Administrator
Posts: 7977
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
Keep it cool. An ice bath is OK, but cold tap water is OK as well.
Isolating sodium formiate and sodium carbonate from these very dilute solutions with tons of other compounds in them is not useful. Sodium carbonate
can most likely be purchased in a supermarket as a cleaning compound.
Isolating chemicals from a brew of all kinds of other chemicals in general is not easy at all. This only is useful for valuable chemicals and usually
the isolation requires conversion to some separable form (e.g. make a precipitate, use large differences in solubilities). In this case I see no
direct and easy method which you can do at home for separating the carbonate and formiate from the solution.
|
|
|
shaheerniazi
Hazard to Self
Posts: 70
Registered: 25-11-2013
Location: Pakistan
Member Is Offline
Mood: radioactive
|
|
Ok, and to seperate the water and chloroform can I use a syringe or can I boil all the water away?and if I leave the sodium carbonate is it soluble in
chloroform?
|
|
|
woelen
Super Administrator
Posts: 7977
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
You need a glass pipette, not some plastic pice, because the plastic will be attacked by the chloroform.
If you boil, then chloroform boils off, not water, because chloroform has a much lower boiling point.
Sodium carbonate does not dissolve in chloroform, but that is not an issue anyway. Water does dissolve to some extent in chloroform and acetone also
does. The blob of liquid you extract from below the aqueous layer will be mostly chloroform, but it may contain a few percent of water and acetone.
But as a first start it would be nice if you get such a blob of liquid.
If you dispose of chloroform, do not pour it down the drain, it will attack the pipes if these are made of PVC or some other plastic material! Also
avoid inhaling the chloroform. Carefully smelling it, just to get to know its smell, can be done, but do not inhale the material for extended periods
of time or at high concentrations and do not smell it very often. If you want to get rid of it, pour it on a paper tissue outside and let it evaporate
and then throw the paper tissue in the household waste.
|
|
|
shaheerniazi
Hazard to Self
Posts: 70
Registered: 25-11-2013
Location: Pakistan
Member Is Offline
Mood: radioactive
|
|
Ok, I just poured some acetone in sodium hypochlorite and there was just some bubbling and the a small layer of thick oil like clear substance made a
layer was that chloroform or acetone.
|
|
|
woelen
Super Administrator
Posts: 7977
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
If the small oily layer is below the aqueous layer then that is (impure) chloroform. You can purify it somewhat by pipetting it from under the aqueous
layer and transferring it to another small bottle which has a small amount of water in it (approximately two times the volume of the chloroform will
do). By shaking, you extract acetone and other impurities in the chloroform into the water. In this way you at least get chloroform, which besides
water has not too much other impurities.
If you also want to get rid of the water you need a drying agent. A good drying agent is anhydrous MgSO4. For that, you again need to pipette the
chloroform to another dry vessel in which there is some anhydrous MgSO4. This compound then absorbs water while it does not dissolve in the
chloroform.
You'll learn something new from this experiment. Isolating and purifying a chemical leads to losses and these losses can become quite large,
especially if you only have a small quantity to be purified.
|
|
|
shaheerniazi
Hazard to Self
Posts: 70
Registered: 25-11-2013
Location: Pakistan
Member Is Offline
Mood: radioactive
|
|
Awsome!!, but where will I get MgSO4 from?
|
|
|
Mr_Magnesium
Hazard to Self
Posts: 60
Registered: 4-8-2013
Location: \rooted/
Member Is Offline
Mood: No Mood
|
|
MgSO4 is epsom salts
you can find that in your local pharmacy
|
|
|
woelen
Super Administrator
Posts: 7977
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
If you buy epsom salt, then you buy the 7-hydrate, MgSO4.7H2O. You need the anhydrous salt. This can be made from the 7-hydrate by heating that in an
oven at 200 C or so. Look up the details over here or on internet, but making the anhydrous salt from the 7-hydrate should not be too difficult. You
can even recycle the salt. If it is used for drying, then you can reheat it again to make it anhydrous again. The only thing which limits the
recycling is that each time it is used, contaminants are absorbed as well, so recycling it too many times is not recommended, but recycling it once or
twice is a viable option.
[Edited on 26-11-13 by woelen]
|
|
|
shaheerniazi
Hazard to Self
Posts: 70
Registered: 25-11-2013
Location: Pakistan
Member Is Offline
Mood: radioactive
|
|
Thanks, just went to the store with my father but couldnt find it.
Ill try some other day to find it.
|
|
|
BlackDragon2712
Hazard to Others
Posts: 124
Registered: 22-12-2012
Location: Everywhere
Member Is Offline
Mood: Sleepy
|
|
http://www.youtube.com/watch?v=FugWTMD1GtE -> Using calcium hypochlorite
http://www.youtube.com/watch?v=XYbnNufX5-c -> Using bleach
|
|
|
shaheerniazi
Hazard to Self
Posts: 70
Registered: 25-11-2013
Location: Pakistan
Member Is Offline
Mood: radioactive
|
|
Thank you BalckDragon2712 youre links are very helpful
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
