Sciencemadness Discussion Board
Not logged in [Login ]
Go To Bottom

Printable Version  
Author: Subject: What to do with a LARGE glass tube?
Sulaiman
International Hazard
*****




Posts: 3561
Registered: 8-2-2015
Location: 3rd rock from the sun
Member Is Offline


[*] posted on 12-5-2015 at 10:16
What to do with a LARGE glass tube?


due to a momentary lapse of reason whilst on eBay, browsing the 'lab glassware' section
I am now the bemused owner of a fairly large glass tube;
(I suspect that it may be borosilicate as there is no green tinge and it is not very heavy, I intend to measure its density)
1207mm long, 160mm i.d., 5.33mm wall thickness. 24 litres capacity (47.5" long, 6.3" i.d., 0.21" thick walls)
It deserves to be in use and on display. I am looking for inspirational ideas ....
So far I have considered, Van der Graaf Generator with belt or hot/dry air
Bi-polar Tesla coil, (Electronics is my main hobby)
Indoor water feature/lamp (Lava, Bubble, Vortex etc.) and some other dumb ideas.

Can anyone suggest a good use for this tube as part of some chemistry related equipment ?

[Edited on 12-5-2015 by Sulaiman]
View user's profile View All Posts By User
Morgan
International Hazard
*****




Posts: 1663
Registered: 28-12-2010
Member Is Offline

Mood: No Mood

[*] posted on 12-5-2015 at 10:48


Maybe something like this although your tube has a wide diameter for it's length it might be tricky. I've had some of those lapses of reason on ebay too.

Rijke tube
https://www.youtube.com/watch?v=0Z0Zm_d2SaA

Fine tuning
https://www.youtube.com/watch?v=--hDPBAv76A

Noise from an unsteady flame Note how a simple wire loop triggers the effect. I read an account where a very large rijke tube was purring quietly in a classroom only to be set into a deafening roar rattling chalkboards by striking a tuning fork of a specific frequency from clear across the room.
https://www.youtube.com/watch?v=EQXcOqH_Drs

Acoustic instability in a combustion chamber
https://www.youtube.com/watch?v=XUFBXXtGloE

[Edited on 12-5-2015 by Morgan]
View user's profile View All Posts By User
Sulaiman
International Hazard
*****




Posts: 3561
Registered: 8-2-2015
Location: 3rd rock from the sun
Member Is Offline


[*] posted on 12-5-2015 at 14:12


Very interesting phenomenon and videos, thanks
I may have a quick try
but it would get annoying really quickly!
View user's profile View All Posts By User
jock88
National Hazard
****




Posts: 505
Registered: 13-12-2012
Member Is Offline

Mood: No Mood

[*] posted on 12-5-2015 at 14:23



If you can stand it on end and make the (now) bottom water tight you could have a nice big visible water vortex by placing a big magnetic stirrer at the bottom.
View user's profile View All Posts By User
j_sum1
Administrator
********




Posts: 6230
Registered: 4-10-2014
Location: Unmoved
Member Is Offline

Mood: Organised

[*] posted on 12-5-2015 at 14:37


Barking Dog reaction?
View user's profile View All Posts By User
Marvin
National Hazard
****




Posts: 995
Registered: 13-10-2002
Member Is Offline

Mood: No Mood

[*] posted on 13-5-2015 at 10:08


I immediately thought of barking dog, but the tube is very wide. Probably much too wide to be safe.
View user's profile View All Posts By User
Praxichys
International Hazard
*****




Posts: 1063
Registered: 31-7-2013
Location: Detroit, Michigan, USA
Member Is Offline

Mood: Coprecipitated

[*] posted on 13-5-2015 at 11:55


1. Use it to cover a giant Jacob's ladder.

2. Build a giant cathode ray tube in it. Slide in a homemade hot-cathode electron gun, attach a phosphor-coated glass plate to the end, crank up the voltage and play with the electron beam. You could make focusing and control coils and eventually be able to display waveforms and stuff.

3. With a good choice of target and enough voltage, you could make a powerful x-ray tube.

4. Using some long skinny electrodes, you could make one heck of an electrolysis cell out of it. Make bromates, chlorates, bromine, metal oxides. Gold plate a walking stick.

5. Use the Jacob's ladder from #1 to make a NO2 generator, get a Birkeland-Eyde nitric acid generator going.




View user's profile Visit user's homepage View All Posts By User
IrC
International Hazard
*****




Posts: 2710
Registered: 7-3-2005
Location: Eureka
Member Is Offline

Mood: Discovering

[*] posted on 13-5-2015 at 13:24


Maybe I'm dating myself but I think the Lava Lamp idea is great.

Move to Colorado, buy a Sitar and your set for life.




"Science is the belief in the ignorance of the experts" Richard Feynman
View user's profile View All Posts By User
Sulaiman
International Hazard
*****




Posts: 3561
Registered: 8-2-2015
Location: 3rd rock from the sun
Member Is Offline


[*] posted on 13-5-2015 at 13:39


I had considered a Lava Lamp but decided it would be such a project that Id never finish it.

Thanks for all of the ideas, I'm going to consider the 'Birkeland-Eyde nitric acid generator', ... in stages.
View user's profile View All Posts By User

  Go To Top