gluon47
Hazard to Self
Posts: 81
Registered: 20-9-2015
Location: oceania
Member Is Offline
Mood: fluorinated and dying
|
|
toluene from thinner
I'm trying to extract toluene from a paint thinner. The thinner says it contains:
toluene 430g/L , acetone 135g/L , methyl isobutyl ketone (MIBK) 40g/L
The acetone won't be a problem to remove. I'll just add water and the thinner should separate into two layers: one containing acetone and water the
other toluene and MIBK.
However, I'm stumped on the next step: separating toluene from MIBK.
Simple distillation won't work as the boiling point for toluene is 110.6 C and MIBK is 117-118 C. Too close.
I suppose fractional distillation would work but I don't have a fractionating column and I'm reluctant to buy one. I'd much rather find an easier way.
I was thinking, could I salt out the toluene from the MIBK or vice versa? If not, does anyone have any other ideas on how to separate these two
solvents?
Thanks in advance,
gluon
|
|
|
JJay
International Hazard
Posts: 3440
Registered: 15-10-2015
Member Is Offline
|
|
It's pretty easy if you have some n-butanol. You can't separate toluene and MIBK with a column, BTW.
http://www.google.com/patents/US5250157
|
|
|
gluon47
Hazard to Self
Posts: 81
Registered: 20-9-2015
Location: oceania
Member Is Offline
Mood: fluorinated and dying
|
|
brilliant jjay!!! I don't have n-butanol but I know where I can get some. Guess I just need to find out what the boiling point for the n-butanol &
MIBK azeotrope is then I'm sorted!
many thanks
|
|
|
JJay
International Hazard
Posts: 3440
Registered: 15-10-2015
Member Is Offline
|
|
Hey, thanks I don't know what it is, but I'm sure it isn't hard to find
experimentally... it's quite likely published on the ACS azeotrope list, and it may be in the Lange or CRC handbooks... I don't know offhand.
[Edited on 12-11-2015 by JJay]
|
|
|
OneEyedPyro
Hazard to Others
Posts: 279
Registered: 7-10-2015
Member Is Offline
Mood: No Mood
|
|
MIBK is slightly soluble in water while toluene is almost completely insoluble.
Perhaps you could repeatedly agitate with hot water then decant until pure.
On another note, why not just go buy pure toluene?
|
|
|
gluon47
Hazard to Self
Posts: 81
Registered: 20-9-2015
Location: oceania
Member Is Offline
Mood: fluorinated and dying
|
|
Quote: Originally posted by OneEyedPyro  | MIBK is slightly soluble in water while toluene is almost completely insoluble.
Perhaps you could repeatedly agitate with hot water then decant until pure.
On another note, why not just go buy pure toluene? |
Great idea
I guess that method has the advantage of not having to buy n-butanol. Do you have any idea on how to tell when all the MIBK has been washed off?
And to answer your question:
Where i live, toluene is completly unavailable to me. I can import it but getting it from thinner is a lot cheaper plus more fun.
|
|
|
Crowfjord
Hazard to Others
Posts: 390
Registered: 20-1-2013
Location: Pacific Northwest
Member Is Offline
Mood: Ever so slowly crystallizing...
|
|
How about a bisulfite extraction?
|
|
|
Oscilllator
National Hazard
Posts: 659
Registered: 8-10-2012
Location: The aqueous layer
Member Is Offline
Mood: No Mood
|
|
gluon47 you should check out NurdRages video on this topic. He extracts toluene from paint thinner that has a very similar composition to yours, and
provides a clear explanation of how it all works.
https://www.youtube.com/watch?v=ddCuWX4vtOA
|
|
|
gluon47
Hazard to Self
Posts: 81
Registered: 20-9-2015
Location: oceania
Member Is Offline
Mood: fluorinated and dying
|
|
damn! just looked at the msds for the thinner and it also contains heptane any
ideas on how I could get rid of the heptane?
It's highly insoluble in water just like toluene so washing isn't an option sadly.
I'm sorry to be of more nuisance.
@oscillator
thanks I've seen that nurdrage video. Sadly his thinner is easier to separate then mine. Nurdrage states that his thinner is MEK, methanol, acetone
and toluene. Toluene is the only insoluble one
[Edited on 13-11-2015 by gluon47]
reality is an illusion 
|
|
|
ave369
Eastern European Lady of Mad Science
Posts: 596
Registered: 8-7-2015
Location: No Location
Member Is Offline
Mood: No Mood
|
|
Try fractional distillation. Heptane, IIRC, is more low-boiling than toluene. The difference in boiling points is about 10-12 Celsius, so you need a
good fractionating column.
Smells like ammonia....
|
|
|
UC235
National Hazard
Posts: 565
Registered: 28-12-2014
Member Is Offline
Mood: No Mood
|
|
You could use solvent extraction to remove the heptane. Of course, if you want the toluene as a solvent, this is ridiculous, but if you need a small
amount as a reagent, DMSO is miscible with toluene but has poor solubility for heptane.
|
|
|
gluon47
Hazard to Self
Posts: 81
Registered: 20-9-2015
Location: oceania
Member Is Offline
Mood: fluorinated and dying
|
|
I do need the toluene as a solvent and so I guess I'll have to buy a fractionating column. Thanks for your great ideas peoples.
P.S do's anyone know if heptane and toluene form an azeotrope? cant find the answer on the internet
[Edited on 13-11-2015 by gluon47]
reality is an illusion
|
|
|
ave369
Eastern European Lady of Mad Science
Posts: 596
Registered: 8-7-2015
Location: No Location
Member Is Offline
Mood: No Mood
|
|
I think a long Vigreux condenser will work as a fractionating column.
Smells like ammonia....
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
