johncena
Harmless
Posts: 13
Registered: 23-12-2015
Member Is Offline
Mood: No Mood
|
|
Flash powder gas?
Hey everyone! I was bored and I decided to extract some flash powder from a big firecracker. Next, I added a small drop of 15% HCL to the powder.
Although there was no visible reaction, a chlorine-like smell started leaking off from the mixture. The quantities I used were very small, but this
gas filled the room and started smelling awfully. So, I'm just asking did I actually do.
Thanks!
|
|
stygian
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 242
Registered: 19-9-2004
Member Is Offline
Mood: No Mood
|
|
chlorine dioxide?
|
|
Bert
|
Thread Moved 23-12-2015 at 13:22 |
Bert
Super Administrator
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2821
Registered: 12-3-2004
Member Is Offline
Mood: " I think we are all going to die. I think that love is an illusion. We are flawed, my darling".
|
|
Try touching the same powder with a small drop of concentrated sulfuric acid on a glass rod. Do it outdoors, in sunlight. You will find out if it's
ClO2 really quickly- You had best only use a quite small amount of flash powder. And personal protective equipment would be a good idea too.
Rapopart’s Rules for critical commentary:
1. Attempt to re-express your target’s position so clearly, vividly and fairly that your target says: “Thanks, I wish I’d thought of putting it
that way.”
2. List any points of agreement (especially if they are not matters of general or widespread agreement).
3. Mention anything you have learned from your target.
4. Only then are you permitted to say so much as a word of rebuttal or criticism.
Anatol Rapoport was a Russian-born American mathematical psychologist (1911-2007).
|
|
johncena
Harmless
Posts: 13
Registered: 23-12-2015
Member Is Offline
Mood: No Mood
|
|
Well, I tried adding some conc. H2SO4 to the same powder, but nothing really happened - no gas, no visible changes, nothing.
|
|
Metacelsus
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2532
Registered: 26-12-2012
Location: Boston, MA
Member Is Offline
Mood: Double, double, toil and trouble
|
|
Could it be KMnO4 making Cl2? That would explain the fact that no gas was produced with H2SO4.
However, adding any acid to flash powder would likely make hydrogen gas by reaction with the metal fuel.
[Edited on 12-24-2015 by Cheddite Cheese]
|
|
Texium
Administrator
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 4521
Registered: 11-1-2014
Location: Salt Lake City
Member Is Offline
Mood: PhD candidate!
|
|
Sulfuric acid is slower to react with aluminum than HCl though due to the oxide layer. Add a bit of a reducing agent to it and suddenly it takes off.
|
|
Bert
Super Administrator
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2821
Registered: 12-3-2004
Member Is Offline
Mood: " I think we are all going to die. I think that love is an illusion. We are flawed, my darling".
|
|
My bad. I suggested sulfuric acid as chlorate based compositions usually ignite on contact- Guess he has a perchlorate or nitrate oxidized flash?
Permanganate oxidized flash is very rare, at least in commerciall fireworks.
It's actually chloric acid that would be produced if chlorate was present, rather than ClO2, I believe. UV light would not then be required for an
ignition...
Rapopart’s Rules for critical commentary:
1. Attempt to re-express your target’s position so clearly, vividly and fairly that your target says: “Thanks, I wish I’d thought of putting it
that way.”
2. List any points of agreement (especially if they are not matters of general or widespread agreement).
3. Mention anything you have learned from your target.
4. Only then are you permitted to say so much as a word of rebuttal or criticism.
Anatol Rapoport was a Russian-born American mathematical psychologist (1911-2007).
|
|
Fantasma4500
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1677
Registered: 12-12-2012
Location: Dysrope (aka europe)
Member Is Offline
Mood: dangerously practical
|
|
could very well be nitrate reacting to form NOCl with HCl
to test for chlorine gas you would wanna fill a small beaker with the gas (chlorine is quite heavy) and then insert burning steel wool
if a cloud of red smoke is formed, then it indicates chlorine gas
quite neat little reaction to play around with, not sure if NOCl would react as vigorously as chlorine?
the gas could also be attempted to be poured out of the beaker and into another beaker with a bit of ammonia, if its indeed chlorine gas you should
see a heavy gas forcing itself into the ammonia beaker creating generous amounts of ammonium chloride, im just supposing NOCl wouldnt be as heavy as
chlorine
sulfuric acid could also be added to the supposed chlorate composition, in a such way excess chlorate is present, if its nitrate it wont etch
aluminium, but if its chlorate it should
|
|
johncena
Harmless
Posts: 13
Registered: 23-12-2015
Member Is Offline
Mood: No Mood
|
|
Extract aluminum powder from firecrackers
Hi everyone! I've been asking myself thsi question for quite a lot of time - is it possible to extract aluminum powder from firecracker powder? I
think my firecracker powder has probably Al/KCLO4/S . I tried putting the powder in hot water and eventually dissolving the potassium perchlorate and
leaving the aluminum and sulfur behind, but it didn't work - the powder simply stayed on top of the water and the mixture didn't get even wet. I know
aluminium powder can be bought online, however, I'm not really keen on internet shopping (sh*tty country). If you have any ideas, please tell me!
johncena
|
|
IceDahl
Harmless
Posts: 22
Registered: 28-2-2016
Member Is Offline
Mood: Curious
|
|
Sandpaper on Aluminium.
|
|
elementcollector1
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2684
Registered: 28-12-2011
Location: The Known Universe
Member Is Offline
Mood: Molten
|
|
Contaminates it with sand, is slow, tedious and work-intensive.
Better idea: Contact the local welding/metal fabrication shop for aluminum turnings on whatever lathe/drill/etc. they use. Put these into a coffee
grinder. Done.
Elements Collected:52/87
Latest Acquired: Cl
Next in Line: Nd
|
|
Tsjerk
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3022
Registered: 20-4-2005
Location: Netherlands
Member Is Offline
Mood: Mood
|
|
Maybe the powder is coated with some kind of hydrophobic stuff. Try to dissolve it in warm toluene (dissolves sulfur) and then in water.
|
|
IceDahl
Harmless
Posts: 22
Registered: 28-2-2016
Member Is Offline
Mood: Curious
|
|
If you can find a cheap coffee grinder you can but some foil in there an hope for the best.
|
|
johncena
Harmless
Posts: 13
Registered: 23-12-2015
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by Tsjerk ![](images/xpblue/lastpost.gif) | Maybe the powder is coated with some kind of hydrophobic stuff. Try to dissolve it in warm toluene (dissolves sulfur) and then in water.
|
Yeah, probably, but sadly I don't have any toluene around me. I should do a little more research.
|
|
johncena
Harmless
Posts: 13
Registered: 23-12-2015
Member Is Offline
Mood: No Mood
|
|
Useful chemicals from firecracker powder
Hello everyone! New Year's coming and I bought some packs of firecrackers, but I was kinda curious to see what was inside them and as I expected they
were full of flash powder and clay. I'm not interested in the clay but in the flash powder. I did some research in Google and found that it might
contain KNO3, Al and probably sulfur because after lighting it up there's a strong suffocating aroma of SO2. The substance that really got my
attention was the aluminium powder. I'm interested in thermite reactions so why would I buy it from the internet and pay so much money when I can
obtain it from MUUCH cheaper sources... Anyway, I tried dissolving the water-soluble parts of the flash powder in water (the potassium nitrate) but
what I ended up was powder that wasn't wetting and it was staying on the surface of the water. I don't know how I can extract the aluminium powder...
I only have water/alcohol/acetone/ethyl acetate as solvents and somewhere I heard that toluene might be used (where the f*ck can I get this?? Also I
don't like to work with carcinogenic stuff.)... Maybe there's a hydrophobic additive to prevent the nitrate from dissolving in water and removing its
hygroscopicity? I don't know, please post if you know anything! ![:)](./images/smilies/smile.gif)
|
|
Bert
|
Threads Merged 30-12-2016 at 13:02 |
Bert
|
Threads Merged 30-12-2016 at 13:08 |