Difference between revisions of "Chromic acid"

From Sciencemadness Wiki
Jump to: navigation, search
(Disposal)
 
Line 115: Line 115:
 
Chromic acid is a powerful oxidizer. Solutions of chromic acid are used to oxidize primary alcohols to aldehydes and secondary alcohols to ketones.
 
Chromic acid is a powerful oxidizer. Solutions of chromic acid are used to oxidize primary alcohols to aldehydes and secondary alcohols to ketones.
  
Addition of a reducing agent, such as [[ascorbic acid]], will reduce it to Cr(III).
+
Addition of a reducing agent, such as [[ascorbic acid]] or [[glucose]], will reduce it to Cr(III).
  
 
===Physical===
 
===Physical===
Line 126: Line 126:
 
Chromic acid can be prepared by adding concentrated [[sulfuric acid]] to a cooled aqueous solution of a dichromate salt:
 
Chromic acid can be prepared by adding concentrated [[sulfuric acid]] to a cooled aqueous solution of a dichromate salt:
  
:H<sub>2</sub>SO<sub>4</sub> + K<sub>2</sub>Cr<sub>2</sub>O<sub>7</sub> → H<sub>2</sub>CrO<sub>4</sub> + K<sub>2</sub>SO<sub>4</sub>
+
: H<sub>2</sub>SO<sub>4</sub> + K<sub>2</sub>Cr<sub>2</sub>O<sub>7</sub> → H<sub>2</sub>CrO<sub>4</sub> + K<sub>2</sub>SO<sub>4</sub>
  
 
Very pure chromic acid can be made by adding [[chromium trioxide]] to pure [[water]].
 
Very pure chromic acid can be made by adding [[chromium trioxide]] to pure [[water]].
  
:CrO<sub>3</sub> + H<sub>2</sub>O ⇋ H<sub>2</sub>CrO<sub>4</sub>
+
: CrO<sub>3</sub> + H<sub>2</sub>O ⇋ H<sub>2</sub>CrO<sub>4</sub>
  
 
==Derivations==
 
==Derivations==
Line 146: Line 146:
  
 
===Dichromic acid===
 
===Dichromic acid===
Can be obtained by adding excess chromium trioxide to chromic acid. It's generally encountered as a side product in the preparation of chromic acid solutions, rather than a desired compound.
+
Can be obtained by adding excess chromium trioxide to conc. or pure chromic acid. It's generally encountered as a side product in the preparation of chromic acid solutions, rather than a desired compound.
  
 
==Projects==
 
==Projects==
Line 157: Line 157:
 
==Handling==
 
==Handling==
 
===Safety===
 
===Safety===
Chromic acid and its derivatives are extremely corrosive to organic materials and flesh. Contact with bare skin causes an intense heating sensation and, if not washed immediately, the acid will cause severe burns. Hexavalent chromium ions are carcinogenic and proper protection must be worn when handling the product. However, when the chromic acid is neutralized with a base, it immediately converts to the less harmful Cr(III), though traces of Cr(VI) may still be in the final product.
+
Chromic acid and its derivatives are extremely corrosive to organic materials and flesh. Contact with bare skin causes an intense heating sensation and, if not washed immediately, the acid will cause severe burns. Hexavalent chromium ions are carcinogenic and proper protection must be worn when handling the product. However, when the chromic acid is neutralized with a reducing agent, it immediately converts to the less harmful Cr(III), though traces of Cr(VI) may still be in the final product.
 +
 
 +
Always make sure that the container you're adding chromic acid is properly washed with no traces or any chloride ions! Chromic acid reacts with chlorides to yield [[chromyl chloride]], which is volatile, corrosive, toxic and carcinogenic. Any chromic acid solution contaminated with chromyl chloride is not safe and must be neutralized immediately.
  
 
===Storage===
 
===Storage===
Line 165: Line 167:
 
Chromic acid should first be diluted in lots of water. After dilution, it can be neutralized with a reducing agent. [[Sodium metabisulfite|Sodium]]/[[potassium metabisulfite]], [[sodium thiosulfate]] or [[sodium sulfite]] are excellent neutralizing agents. If the acid is not diluted first, the neutralization reaction will release lots of sulfur dioxide.
 
Chromic acid should first be diluted in lots of water. After dilution, it can be neutralized with a reducing agent. [[Sodium metabisulfite|Sodium]]/[[potassium metabisulfite]], [[sodium thiosulfate]] or [[sodium sulfite]] are excellent neutralizing agents. If the acid is not diluted first, the neutralization reaction will release lots of sulfur dioxide.
  
[[Sodium bicarbonate]] will also neutralize the acid to Cr(III), however there might still be traces of Cr(IV) in the product, so this might not be a suitable disposal agent.
+
[[Sodium bicarbonate]] appears to also neutralize the acid to Cr(III), however there might still be traces of Cr(IV) in the product, so this might not be a suitable disposal agent. Also, the neutralization reaction produces lots foaming, which will aerosolize toxic and carcinogenic Cr(VI) particulates, so it's best to avoid this route.
  
 
==References==
 
==References==

Latest revision as of 19:39, 16 October 2022

Chromic acid
Names
IUPAC name
Chromic acid
Systematic IUPAC name
Dihydroxidodioxidochromium
Other names
Chromic(VI) acid
Tetraoxochromic acid
Identifiers
Jmol-3D images Image
Properties
H2CrO4
Molar mass 118.01 g/mol
Appearance Dark red/reddish-brown viscous liquid
Odor Odorless
Density 1.201 g/cm3
Melting point 197 °C (387 °F; 470 K)
Boiling point 250 °C (482 °F; 523 K)
169 g/100 ml
Solubility Reacts with alcohols
Soluble in acetone
Vapor pressure ~0 mmHg
Acidity (pKa) -0.8 to 1.6
Hazards
Safety data sheet ScienceLab
Flash point Non-flammable
Lethal dose or concentration (LD, LC):
51.9 mg/kg (H2CrO4·2Na, rat, oral)
Related compounds
Related compounds
Chromium trioxide
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
Infobox references

Chromic acid is the name given to the compound resulted from the addition of concentrated sulfuric acid to a dichromate salt, such as potassium dichromate. The resulting product however is impure, and also tends to contain other compounds such as chromium trioxide or dichromic acid. The generally recognized formula for chromic acid is H2CrO4.

Properties

Chemical

Chromic acid is a powerful oxidizer. Solutions of chromic acid are used to oxidize primary alcohols to aldehydes and secondary alcohols to ketones.

Addition of a reducing agent, such as ascorbic acid or glucose, will reduce it to Cr(III).

Physical

Chromic acid is a dark red to red-brownish viscous liquid or solid, that decomposes on boiling.

Availability

Chromic acid is generally not sold, and has to be prepared in situ.

Preparation

Chromic acid can be prepared by adding concentrated sulfuric acid to a cooled aqueous solution of a dichromate salt:

H2SO4 + K2Cr2O7 → H2CrO4 + K2SO4

Very pure chromic acid can be made by adding chromium trioxide to pure water.

CrO3 + H2O ⇋ H2CrO4

Derivations

Chromosulfuric acid

Made by adding an excess of sulfuric acid to a supersaturated solution of potassium dichromate. One standard recipe involves adding 93 ml of concentrated (95-98%) sulfuric acid to a cooled 7 ml solution of supersaturated K2Cr2O7. If the solution is not cooled, chromium trioxide will precipitate. The resulting liquid has a red-brownish color, it is viscous and has a weak unpleasant rotten eggs smell (though it's best not to inhale chromic solution vapors).

It is also known as sulfochromic mixture.

Chromonitric acid

This special mixture is made by adding concentrated nitric acid to a dichromate salt. It is/was widely used in the countries of the Soviet bloc, instead of the more common piranha solution. May release nitrogen oxides fumes during preparation.

Chromonitric acid is known to ignite organic materials and pose an explosion hazard.[1]

Diluted mixtures of chromic and nitric acids can be used to test for silver.

Dichromic acid

Can be obtained by adding excess chromium trioxide to conc. or pure chromic acid. It's generally encountered as a side product in the preparation of chromic acid solutions, rather than a desired compound.

Projects

  • Clean glassware
  • Jones oxidation
  • Make chromyl chloride
  • Identify silver (chromonitric)
  • Destroy small samples of hazardous organic compounds/alkaloids

Handling

Safety

Chromic acid and its derivatives are extremely corrosive to organic materials and flesh. Contact with bare skin causes an intense heating sensation and, if not washed immediately, the acid will cause severe burns. Hexavalent chromium ions are carcinogenic and proper protection must be worn when handling the product. However, when the chromic acid is neutralized with a reducing agent, it immediately converts to the less harmful Cr(III), though traces of Cr(VI) may still be in the final product.

Always make sure that the container you're adding chromic acid is properly washed with no traces or any chloride ions! Chromic acid reacts with chlorides to yield chromyl chloride, which is volatile, corrosive, toxic and carcinogenic. Any chromic acid solution contaminated with chromyl chloride is not safe and must be neutralized immediately.

Storage

Chromic acid should be stored in glass bottles with stopper or lid, away from any organic material, with a proper label and a hazard symbol. The acid can be stored for long periods of time without decomposition.

Disposal

Chromic acid should first be diluted in lots of water. After dilution, it can be neutralized with a reducing agent. Sodium/potassium metabisulfite, sodium thiosulfate or sodium sulfite are excellent neutralizing agents. If the acid is not diluted first, the neutralization reaction will release lots of sulfur dioxide.

Sodium bicarbonate appears to also neutralize the acid to Cr(III), however there might still be traces of Cr(IV) in the product, so this might not be a suitable disposal agent. Also, the neutralization reaction produces lots foaming, which will aerosolize toxic and carcinogenic Cr(VI) particulates, so it's best to avoid this route.

References

  1. http://booksonchemistry.com/index.php?id1=3&category=laborotor-tech&author=zaharov-ln&book=1991&page=26

Relevant Sciencemadness threads