Difference between revisions of "Hydrobromic acid"

From Sciencemadness Wiki
Jump to: navigation, search
 
(11 intermediate revisions by 2 users not shown)
Line 1: Line 1:
 +
[[File:Azeotropic hydrobromic acid by NurdRage.jpg|thumb|350px|Freshly distilled azeotropic hydrobromic acid]]
 
'''Hydrobromic acid''' is a solution of [[hydrogen bromide]] in water. It is normally a clear, colorless liquid, sometimes colored yellowish or brown by decomposition (oxidation by air) and release of elemental [[bromine]], with a strong odor. It is one of the strongest mineral acids.
 
'''Hydrobromic acid''' is a solution of [[hydrogen bromide]] in water. It is normally a clear, colorless liquid, sometimes colored yellowish or brown by decomposition (oxidation by air) and release of elemental [[bromine]], with a strong odor. It is one of the strongest mineral acids.
  
 
== Properties ==
 
== Properties ==
 
=== Physical properties ===
 
=== Physical properties ===
The physical properties of hydrobromic acid vary depending on its concentration. Azeotropic hydrobromic acid contains 48% HBr, has a density of 1,49 g/cm<sup>3</sup>, and boils at 124°C.
+
The physical properties of hydrobromic acid vary depending on its concentration. Azeotropic hydrobromic acid contains 48% HBr, has a density of 1.49 g/cm<sup>3</sup>, and boils at 12 4°C. Over-azeotropic solutions of this acid fume.
  
 
=== Chemical properties ===
 
=== Chemical properties ===
Line 11: Line 12:
  
 
== Sources ==
 
== Sources ==
Chemical reagent stores typically supply hydrobromic acid. It is not used in any household chemicals.
+
Chemical reagent stores typically supply hydrobromic acid. It is not usually used in any household chemicals, though one Sciencemadness user reported that he found hydrobromic acid as a drain cleaner of unspecified brand.
  
 
== Preparation and purification ==
 
== Preparation and purification ==
The main way of synthesizing hydrobromic acid is the reaction between alkali metal bromides and diluted sulfuric acid. Care must be taken not to use concentrated sulfuric acid or another oxidizing acid, because these acids oxidize bromide to elemental bromine. Even with this reaction, the resulting acid may come out brown, contaminated with a small amount of bromine.
+
The main way of synthesizing hydrobromic acid is the reaction between alkali metal bromides and diluted [[sulfuric acid]], usually at a concentration of around 5.8 M.
 +
 
 +
: H<sub>2</sub>SO<sub>4</sub> + KBr → KHSO<sub>4</sub> + HBr
 +
 
 +
[[Sodium bisulfate]] can also be used instead.<ref>https://www.youtube.com/watch?v=C3n4Xqfb9qk</ref>
 +
 
 +
Care must be taken not to use concentrated sulfuric acid or another oxidizing acid, because these acids oxidize bromide to elemental [[bromine]]. Likewise, the reaction temperature must not exceed 75 °C, as this will further oxidize HBr to elemental bromine. Even so, the resulting acid may come out brown, contaminated with a small amount of bromine. The bromine contamination can be removed by refluxing the acid with red [[phosphorus]] or elemental [[sulfur]]. [[Sodium metabisulfite]] can also be used, and it's a better alternative.<ref>https://www.youtube.com/watch?v=4ei_xUIhRas</ref>
 +
 
 +
Hydrobromic acid can be easily prepared in the laboratory via the reaction of elemental [[bromine]], [[sulfur dioxide]], and water.<ref>[https://pubs.rsc.org/en/content/articlelanding/1900/CT/CT9007700648 Scott, A. (1900). "Preparation of Pure Hydrobromic Acid". Journal of the Chemical Society, Transactions. 77: 648–651]</ref>
 +
 
 +
: Br<sub>2</sub> + SO<sub>2</sub> + 2 H<sub>2</sub>O → H<sub>2</sub>SO<sub>4</sub> + 2 HBr
 +
 
 +
Elemental bromine needed for this reaction can be produced by addition of [[Potassium peroxymonosulfate|oxone]] to a bromide salt, like [[sodium bromide]].
  
 
Anhydrous HBr can be purified by letting the gas through a solution of [[phenol]] in tetrachloromethane. Azeotropic hydrobromic acid cannot be purified this way. However, azeotropic HBr can be re-distilled, which typically removes the yellow or brown color and gives clear, colorless acid.
 
Anhydrous HBr can be purified by letting the gas through a solution of [[phenol]] in tetrachloromethane. Azeotropic hydrobromic acid cannot be purified this way. However, azeotropic HBr can be re-distilled, which typically removes the yellow or brown color and gives clear, colorless acid.
Line 20: Line 33:
 
== Projects ==
 
== Projects ==
 
* Make sulfuric acid from sulfur, using NurdRage's electrobromine process (the hydrobromic acid is not expended in this process and is fully regenerated);
 
* Make sulfuric acid from sulfur, using NurdRage's electrobromine process (the hydrobromic acid is not expended in this process and is fully regenerated);
 +
* Make elemental [[bromine]];
 +
* Make brominated hydrocarbons from alcohols (useful in making grignards)
  
 
== Handling ==
 
== Handling ==
Line 32: Line 47:
 
=== Disposal ===
 
=== Disposal ===
 
Hydrobromic acid should be neutralized before disposal. Any non-toxic base will do the trick.
 
Hydrobromic acid should be neutralized before disposal. Any non-toxic base will do the trick.
 
  
 
==References==
 
==References==
*http://en.wikipedia.org/wiki/Hydrobromic_acid
+
<references/>
 
===Relevant Sciencemadness threads===
 
===Relevant Sciencemadness threads===
 +
*[http://www.sciencemadness.org/talk/viewthread.php?tid=13808 Diluted hydrobromic acid]
 +
*[http://www.sciencemadness.org/talk/viewthread.php?tid=2169 Making constant boiling hydrobromic acid, a write-up.]
 +
*[http://www.sciencemadness.org/talk/viewthread.php?tid=79859 How to get Hydrobromic acid (HBr) from Br2]
 +
*[http://www.sciencemadness.org/talk/viewthread.php?tid=17395 bumping and hydrobromic acid]
  
 
[[Category:Chemical compounds]]
 
[[Category:Chemical compounds]]
Line 46: Line 64:
 
[[Category:Reducing agents]]
 
[[Category:Reducing agents]]
 
[[Category:Bromides]]
 
[[Category:Bromides]]
 +
[[Category:Liquids]]
 
[[Category:Materials unstable in basic solution]]
 
[[Category:Materials unstable in basic solution]]
 
[[Category:Corrosive chemicals]]
 
[[Category:Corrosive chemicals]]
 +
[[Category:Irritants]]

Latest revision as of 19:21, 20 June 2023

Freshly distilled azeotropic hydrobromic acid

Hydrobromic acid is a solution of hydrogen bromide in water. It is normally a clear, colorless liquid, sometimes colored yellowish or brown by decomposition (oxidation by air) and release of elemental bromine, with a strong odor. It is one of the strongest mineral acids.

Properties

Physical properties

The physical properties of hydrobromic acid vary depending on its concentration. Azeotropic hydrobromic acid contains 48% HBr, has a density of 1.49 g/cm3, and boils at 12 4°C. Over-azeotropic solutions of this acid fume.

Chemical properties

Hydrobromic acid is a strong acid, with properties similar to hydrochloric acid. It's, however, a somewhat stronger reducing agent.

The main property of this acid and the reason why it's sought after is its ability to brominate compounds. It is used to obtain both inorganic and organic bromides.

Sources

Chemical reagent stores typically supply hydrobromic acid. It is not usually used in any household chemicals, though one Sciencemadness user reported that he found hydrobromic acid as a drain cleaner of unspecified brand.

Preparation and purification

The main way of synthesizing hydrobromic acid is the reaction between alkali metal bromides and diluted sulfuric acid, usually at a concentration of around 5.8 M.

H2SO4 + KBr → KHSO4 + HBr

Sodium bisulfate can also be used instead.[1]

Care must be taken not to use concentrated sulfuric acid or another oxidizing acid, because these acids oxidize bromide to elemental bromine. Likewise, the reaction temperature must not exceed 75 °C, as this will further oxidize HBr to elemental bromine. Even so, the resulting acid may come out brown, contaminated with a small amount of bromine. The bromine contamination can be removed by refluxing the acid with red phosphorus or elemental sulfur. Sodium metabisulfite can also be used, and it's a better alternative.[2]

Hydrobromic acid can be easily prepared in the laboratory via the reaction of elemental bromine, sulfur dioxide, and water.[3]

Br2 + SO2 + 2 H2O → H2SO4 + 2 HBr

Elemental bromine needed for this reaction can be produced by addition of oxone to a bromide salt, like sodium bromide.

Anhydrous HBr can be purified by letting the gas through a solution of phenol in tetrachloromethane. Azeotropic hydrobromic acid cannot be purified this way. However, azeotropic HBr can be re-distilled, which typically removes the yellow or brown color and gives clear, colorless acid.

Projects

  • Make sulfuric acid from sulfur, using NurdRage's electrobromine process (the hydrobromic acid is not expended in this process and is fully regenerated);
  • Make elemental bromine;
  • Make brominated hydrocarbons from alcohols (useful in making grignards)

Handling

Safety

Hydrobromic acid is a strong and corrosive acid. Protective clothing and gear is recommended when handling it. Concentrated solutions fume with hydrogen bromide gas, which is an irritant to lungs.

The toxicity of hydrobromic acid is relatively low. Bromide poisoning is possible, but requires large doses of bromides taken by the organism.

Storage

Hydrobromic acid should be stored the same way as any other strong fuming acid: in a glass bottle, locked in a special acid cabinet.

Disposal

Hydrobromic acid should be neutralized before disposal. Any non-toxic base will do the trick.

References

  1. https://www.youtube.com/watch?v=C3n4Xqfb9qk
  2. https://www.youtube.com/watch?v=4ei_xUIhRas
  3. Scott, A. (1900). "Preparation of Pure Hydrobromic Acid". Journal of the Chemical Society, Transactions. 77: 648–651

Relevant Sciencemadness threads