rstar
Hazard to Others
Posts: 138
Registered: 22-9-2011
Location: Besides valence shell
Member Is Offline
Mood: Dark
|
|
Reduction of CuCl2 to CuCl
Hi Geeks,
Recently I tried to produce Copper(I) Chloride, by the Reduction of Copper(II) Chloride.
I added NaCl to a Hot solution of CuSO4, to produce CuCl2 :
2NaCl + CuSO4 = Na2SO4 + CuCl2
The solution changed from Bluish to Green color
Then I heated this solution and added K2S2O5, and there was a lot of bubbling. After bubbling stopped I got a yellow solution, but there wasn't any
white precipitate of CuCl, as I expected.
I added NaOH to the solution and there was an instant red precipitate, which i believe is Cu2O, and therefore it is sure that the solution has
Copper(I) or Cu<sup>+</sup> ions.
Can anyone tell me how to get CuCl out of that solution ???
"A tidy laboratory means a lazy chemist "
- Jöns Jacob Berzelius
|
|
|
kmno4
International Hazard
Posts: 1495
Registered: 1-6-2005
Location: Silly, stupid country
Member Is Offline
Mood: No Mood
|
|
Add water.
Be sure that solution is acidic, in another case your CuCl will be contaminated with Cu2O. Wet CuCl is extremely sensitive to air, so you have to act
quickly.
|
|
|
rstar
Hazard to Others
Posts: 138
Registered: 22-9-2011
Location: Besides valence shell
Member Is Offline
Mood: Dark
|
|
It didn't work for me 
"A tidy laboratory means a lazy chemist "
- Jöns Jacob Berzelius
|
|
|
blogfast25
International Hazard
Posts: 10562
Registered: 3-2-2008
Location: Neverland
Member Is Offline
Mood: No Mood
|
|
Search the forum for this topic: there are quite a few threads...
|
|
|
Nicodem
Super Moderator
Posts: 4230
Registered: 28-12-2004
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by rstar  |
I added NaCl to a Hot solution of CuSO4, to produce CuCl2 :
2NaCl + CuSO4 = Na2SO4 + CuCl2
The solution changed from Bluish to Green color |
I'm afraid that the above equation makes no sense. First of all, you can not have NaCl, CuSO4, etc., in a monophasic aqueous solution. Instead you
have solvated ions and various species derived from protonation and coordination equilibria. For example, hydrated Cu<sup>2+</sup> ions
tend to exchange the H<sub>2</sub>O ligand with Cl<sup>-</sup> ligand, thus forming various chlorocuprate anions. You can
observe the result of this reaction by the characteristic colour change that accompanies the ligand exchange.
| Quote: | | It didn't work for me |
Since you did not provide the experimental data, nobody can find the origin of the unsuccessful synthesis. Though, I can make a worthless guestimate
that perhaps you used a large excess of NaCl, thus preventing the formation of CuCl(s). Copper(I) cations can form chlorocuprates(I). I would expect
the sodium cation present in the solution does not form insoluble chlorocuprate(I) salts, also because the complex anion is not particularly stable
(fast H<sub>2</sub>O <=> Cl <sup>-</sup> ligand exchange), hence no precipitate.
…there is a human touch of the cultist “believer” in every theorist that he must struggle against as being
unworthy of the scientist. Some of the greatest men of science have publicly repudiated a theory which earlier they hotly defended. In this lies their
scientific temper, not in the scientific defense of the theory. - Weston La Barre (Ghost Dance, 1972)
Read the The ScienceMadness Guidelines!
|
|
|
nezza
Hazard to Others
Posts: 324
Registered: 17-4-2011
Location: UK
Member Is Offline
Mood: phosphorescent
|
|
Is bisulphite a strong enough reducing agent for this reaction ?. The method I have seen uses copper turnings in an acid solution with chloride ion
present.
|
|
|
kmno4
International Hazard
Posts: 1495
Registered: 1-6-2005
Location: Silly, stupid country
Member Is Offline
Mood: No Mood
|
|
Take 1 drop of your yellow solution and add it to 1 cm3 of water.
Water should become cloudy and possibly you will get some white precipitate (quickly getting blue) - it is "CuCl".
If water stays clear - no Cu(I) is present.
|
|
|
woelen
Super Administrator
Posts: 7977
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
Na2S2O5 definitely is a strong enough reductor. Collect a lot of the red precipitate (no need to dry, just filter and rinse with some water) and add
this to concentrated HCl to which some Na2S2O5 is added. All of the precipitate will dissolve and you'll get a colorless solution in an ideal
situation, in practice it will be somewhat greenish/yellow. Try to dissolve the red material in as little as possible of HCl to which Na2S2O5 is added
beforehand. Then pour the solution into water. A white 'snow' will be formed. This white 'snow' is CuCl.
|
|
|
rstar
Hazard to Others
Posts: 138
Registered: 22-9-2011
Location: Besides valence shell
Member Is Offline
Mood: Dark
|
|
Thanx for suggestions 
"A tidy laboratory means a lazy chemist "
- Jöns Jacob Berzelius
|
|
|
Megamarko94
Hazard to Self
Posts: 68
Registered: 31-12-2010
Member Is Offline
Mood: No Mood
|
|
this how i did it..
take some CuCO3 and add HCl to it... now you have CuCl2 in solution.
take some copper wire and make it into coil and put into the beaker now heat the solution with copper wire dont boil it dry.
get an icebath and put the beaker in it and you will see white crystals apear.(CuCl)
mine changed color to greenish due to oxidation in air and contaminants.
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
