Difference between revisions of "Plasticware"
(→Other) |
(→Basic plasticware) |
||
(15 intermediate revisions by the same user not shown) | |||
Line 7: | Line 7: | ||
Most common types of plastic used: | Most common types of plastic used: | ||
*''Polyethylene'': Comes in several varieties, low density (LDPE), high density (HDPE). Cheap, used when working with salts or in analytical chemistry. | *''Polyethylene'': Comes in several varieties, low density (LDPE), high density (HDPE). Cheap, used when working with salts or in analytical chemistry. | ||
− | *''Polystyrene'': Less resistant to solvents than PE, it's used for trays, pouring boats, weighing dish, etc. | + | *''[[Polystyrene]]'': Less resistant to solvents than PE, it's used for trays, pouring boats, weighing dish, etc. |
*''[[Polytetrafluoroethylene]]'' (PTFE or Teflon): Expensive, mainly used when working with extremely corrosive chemicals. | *''[[Polytetrafluoroethylene]]'' (PTFE or Teflon): Expensive, mainly used when working with extremely corrosive chemicals. | ||
− | Strong solvents, such as [[acetone]], ethers, halocarbons (except most fluorocarbons), [[acetonitrile]] will attack plastic, though the speed which they do that varies. | + | Strong solvents, such as [[acetone]], esters, ethers, halocarbons (except most fluorocarbons), [[acetonitrile]] will attack plastic, though the speed which they do that varies, depending on the type of plastic and thickness. |
Some reagents, such as [[hydrogen peroxide]] are generally stored in plastic bottles, as glass catalyzes their decomposition. | Some reagents, such as [[hydrogen peroxide]] are generally stored in plastic bottles, as glass catalyzes their decomposition. | ||
Plasticware items tend to break down if exposed to strong UV light (like sunlight). They are also unsuitable for distilling most liquids. | Plasticware items tend to break down if exposed to strong UV light (like sunlight). They are also unsuitable for distilling most liquids. | ||
+ | |||
+ | Below there's a list of various plastic lab items encountered in the chemistry lab, that are useful for the average amateur chemist. Obviously you will not need them all, but the most important basic and advanced items are necessary when doing any lab work. | ||
==Basic plasticware== | ==Basic plasticware== | ||
− | === | + | ===[[Beaker]]s=== |
Polyethylene beakers tend to be used when handling various aqueous solutions and diluted acids. Not employed for long term use of strong acids or organic solvents. PTFE beakers are mainly used when working with hydrofluoric acid solutions. | Polyethylene beakers tend to be used when handling various aqueous solutions and diluted acids. Not employed for long term use of strong acids or organic solvents. PTFE beakers are mainly used when working with hydrofluoric acid solutions. | ||
− | ===Erlenmeyer flask=== | + | ===Dispensing bottle=== |
+ | Useful when pouring liquids through small orifices. | ||
+ | |||
+ | ===[[Erlenmeyer flask]]=== | ||
Less common than plastic beakers, but they do exist. Some models tend to have screw and cap. | Less common than plastic beakers, but they do exist. Some models tend to have screw and cap. | ||
− | === | + | ===[[Funnel]]s=== |
PE funnels are more often used than glass ones, as they don't chip when hit and do not freeze if stuck on a ground glass joint. | PE funnels are more often used than glass ones, as they don't chip when hit and do not freeze if stuck on a ground glass joint. | ||
− | ===Graduated | + | ===[[Graduated cylinder]]s=== |
Unlike glass cylinders, plastic test tubes tend to deform easily and are unsuitable for fine measurement of volumes. | Unlike glass cylinders, plastic test tubes tend to deform easily and are unsuitable for fine measurement of volumes. | ||
− | ===Pipette=== | + | ===Measuring scoop=== |
+ | Similar to spatulas, can be used for taking exact amounts of material. | ||
+ | |||
+ | ===[[Pipette]]=== | ||
Pasteur pipettes are commonly used due as they're simple to use, cheap and reliable. | Pasteur pipettes are commonly used due as they're simple to use, cheap and reliable. | ||
Line 37: | Line 45: | ||
Pipette tips are made of PE. | Pipette tips are made of PE. | ||
+ | |||
+ | ===Pipette jar=== | ||
+ | Similar to a graduated cylinder, though opaque and no markings, it is commonly used as a holster for various pipettes, either for storage or washing. | ||
===Pouring boat=== | ===Pouring boat=== | ||
Used for handling solids and, as their name suggests, add them to a flask or bottle. | Used for handling solids and, as their name suggests, add them to a flask or bottle. | ||
− | ===Reagent bottle=== | + | ===[[Reagent bottle]]=== |
− | Plastic storage bottles, made of PE or polystyrene are commonly used for storing dry reagents, such as salts, some organic solvents. Hydrogen peroxide and alcohols are generally stored in PE bottles. | + | Plastic storage bottles, made of PE or polystyrene are commonly used for storing dry reagents, such as salts, granules, some organic solvents. Hydrogen peroxide and volatile flammable solvents that do not attack plastic, such as alcohols, are generally stored in PE bottles. |
− | === | + | ===[[Syringe]]s=== |
Graduated plastic tubes fitted with a plastic piston, commonly used for transferring liquids. Come together with needles. | Graduated plastic tubes fitted with a plastic piston, commonly used for transferring liquids. Come together with needles. | ||
− | ===Test | + | ===[[Test tube]]s=== |
PE or PTFE tubes tend to be used for chemistry involving salts and reactions where no heat is needed/generated. | PE or PTFE tubes tend to be used for chemistry involving salts and reactions where no heat is needed/generated. | ||
Line 57: | Line 68: | ||
Used for storing, handling and carrying lab equipment. | Used for storing, handling and carrying lab equipment. | ||
− | === | + | ===[[Tubing]]s=== |
Plastic tubes are used for cooling, PE and PTFE tubes are used for transferring gasses. | Plastic tubes are used for cooling, PE and PTFE tubes are used for transferring gasses. | ||
Cannula is one such type of tube. | Cannula is one such type of tube. | ||
− | ===Tweezers=== | + | ===[[Tweezers]]=== |
− | Plastic tweezers can be used for handling items that are corrosive to metals or electric components. | + | Plastic tweezers can be used for handling items that are corrosive to metals, or when handling electric components. |
− | ===Volumetric | + | ===[[Volumetric flask]]s=== |
Used for measuring fixed amounts of liquid. | Used for measuring fixed amounts of liquid. | ||
− | ===Wash bottle=== | + | ===[[Wash bottle]]=== |
Wash bottles are plastic bottles with a tube protruding the cap, which generally has a small diameter detachable head. Commonly used for washings (hence the name). | Wash bottles are plastic bottles with a tube protruding the cap, which generally has a small diameter detachable head. Commonly used for washings (hence the name). | ||
A less known type is the refillable wash bottle. | A less known type is the refillable wash bottle. | ||
− | ===Weighing dish=== | + | ===[[Weighing dish]]=== |
− | Come in various shapes, like square or hexagonal, are commonly used for weighing solids or for air drying wet solids. Can be made of PE | + | Come in various shapes, like square or hexagonal, are commonly used for weighing solids or for air drying wet solids. Can be made of PE or polystyrene. |
==Advanced plasticware== | ==Advanced plasticware== | ||
− | ===Agar plate=== | + | ===[[Agar plate]]=== |
Used in microbiology for cultivating microorganisms. | Used in microbiology for cultivating microorganisms. | ||
Line 84: | Line 95: | ||
===Burette butterfly clamps=== | ===Burette butterfly clamps=== | ||
− | Used for holding | + | Used for holding [[burette]]s. |
− | ===Drying rack=== | + | ===[[Drying rack]]=== |
Used for drying lab items. | Used for drying lab items. | ||
− | ===Eppendorf | + | ===[[Eppendorf vial]]s=== |
Commonly used in biology, in centrifugation. | Commonly used in biology, in centrifugation. | ||
===Funnel supports=== | ===Funnel supports=== | ||
Used for holding separatory funnels. Come in two types, full ring or "C" shaped. | Used for holding separatory funnels. Come in two types, full ring or "C" shaped. | ||
+ | |||
+ | ===[[Joint sleeve]]s=== | ||
+ | PTFE joint sleeves are used in ground glass joints due to their chemical inertness. | ||
===Hydrometer=== | ===Hydrometer=== | ||
Although glass hydrometers are common, plastic hydrometers are also commonly encountered, as they do not break if struck, which would be catastrophic for the device. | Although glass hydrometers are common, plastic hydrometers are also commonly encountered, as they do not break if struck, which would be catastrophic for the device. | ||
− | === | + | ===Hose stopcock=== |
− | + | [https://www.buerkle.de/website/var/tmp/image-thumbnails/0/2321/thumb__w1920/schlauchhahn_00028832.jpeg Similar to gas/water valves], this type of stopcock is used in various plastic tubing as a simple fluid valve. Also comes in metal and glass form. | |
− | === | + | ===[[Keck clip]]s=== |
− | + | Also known as plastic joint clips, kecks are used for holding various glassware with ground glass joints. Manufacturers tend to give a distinct color for each keck clip size, though the colors may differ from producers. Also comes in metal form. | |
+ | |||
+ | ===Spray bottle=== | ||
+ | Useful when spraying liquids. | ||
===Stir bar=== | ===Stir bar=== | ||
Line 110: | Line 127: | ||
Similar to the stir bar, it consists of a stick made of PTFE, with one end containing a magnet. | Similar to the stir bar, it consists of a stick made of PTFE, with one end containing a magnet. | ||
− | ===Syringe filter=== | + | ===[[Syringe filter]]=== |
Used for filtering small amounts of liquid. | Used for filtering small amounts of liquid. | ||
Line 119: | Line 136: | ||
Microtiter plates are used for holding small vials. | Microtiter plates are used for holding small vials. | ||
+ | |||
+ | ===Tubing connectors=== | ||
+ | Used when connecting multiple tubes. Have various shapes, like '''T''', '''Y''', '''L''', '''+''', etc. | ||
==Other== | ==Other== | ||
===Balance brush=== | ===Balance brush=== | ||
Used to clean the lab balance. | Used to clean the lab balance. | ||
+ | |||
+ | ===Bottle carrier=== | ||
+ | Useful for carrying multiple reagent bottles. | ||
+ | |||
+ | ===Bottle spigot=== | ||
+ | Useful when pouring liquids from a large tank, like distilled water. | ||
===Face shield=== | ===Face shield=== | ||
Line 133: | Line 159: | ||
Used when pouring from drums or jugs. They look like [http://www.sigmaaldrich.com/catalog/product/aldrich/z511870 this]. | Used when pouring from drums or jugs. They look like [http://www.sigmaaldrich.com/catalog/product/aldrich/z511870 this]. | ||
− | ===Respirator=== | + | ===[[Respirator]]=== |
Used as PPE. | Used as PPE. | ||
Latest revision as of 20:41, 2 October 2022
This article is a stub. Please help Sciencemadness Wiki by expanding it, adding pictures, and improving existing text.
|
Plasticware is the general term for all lab vessels, containers and other equipment made of plastic material. Unlike glassware, plastic equipment is used for processes where mechanical impacts are more common or for storing various chemical reagents, usually because plastic is lighter than glass and will not shatter if dropped on the floor.
Contents
- 1 General
- 2 Basic plasticware
- 2.1 Beakers
- 2.2 Dispensing bottle
- 2.3 Erlenmeyer flask
- 2.4 Funnels
- 2.5 Graduated cylinders
- 2.6 Measuring scoop
- 2.7 Pipette
- 2.8 Pipette jar
- 2.9 Pouring boat
- 2.10 Reagent bottle
- 2.11 Syringes
- 2.12 Test tubes
- 2.13 Trays
- 2.14 Tubings
- 2.15 Tweezers
- 2.16 Volumetric flasks
- 2.17 Wash bottle
- 2.18 Weighing dish
- 3 Advanced plasticware
- 3.1 Agar plate
- 3.2 Aspirator vacuum pump
- 3.3 Burette butterfly clamps
- 3.4 Drying rack
- 3.5 Eppendorf vials
- 3.6 Funnel supports
- 3.7 Joint sleeves
- 3.8 Hydrometer
- 3.9 Hose stopcock
- 3.10 Keck clips
- 3.11 Spray bottle
- 3.12 Stir bar
- 3.13 Stir bar retriever
- 3.14 Syringe filter
- 3.15 Test tube racks
- 3.16 Tubing connectors
- 4 Other
- 5 See also
- 6 References
General
Plastic items are mainly used for short term handling of reagents. Most common plasticware include funnels, reagent storage bottles, racks, etc. Plasticware are commonly used when handling materials that react with glass, such as hydrofluoric acid.
Most common types of plastic used:
- Polyethylene: Comes in several varieties, low density (LDPE), high density (HDPE). Cheap, used when working with salts or in analytical chemistry.
- Polystyrene: Less resistant to solvents than PE, it's used for trays, pouring boats, weighing dish, etc.
- Polytetrafluoroethylene (PTFE or Teflon): Expensive, mainly used when working with extremely corrosive chemicals.
Strong solvents, such as acetone, esters, ethers, halocarbons (except most fluorocarbons), acetonitrile will attack plastic, though the speed which they do that varies, depending on the type of plastic and thickness.
Some reagents, such as hydrogen peroxide are generally stored in plastic bottles, as glass catalyzes their decomposition.
Plasticware items tend to break down if exposed to strong UV light (like sunlight). They are also unsuitable for distilling most liquids.
Below there's a list of various plastic lab items encountered in the chemistry lab, that are useful for the average amateur chemist. Obviously you will not need them all, but the most important basic and advanced items are necessary when doing any lab work.
Basic plasticware
Beakers
Polyethylene beakers tend to be used when handling various aqueous solutions and diluted acids. Not employed for long term use of strong acids or organic solvents. PTFE beakers are mainly used when working with hydrofluoric acid solutions.
Dispensing bottle
Useful when pouring liquids through small orifices.
Erlenmeyer flask
Less common than plastic beakers, but they do exist. Some models tend to have screw and cap.
Funnels
PE funnels are more often used than glass ones, as they don't chip when hit and do not freeze if stuck on a ground glass joint.
Graduated cylinders
Unlike glass cylinders, plastic test tubes tend to deform easily and are unsuitable for fine measurement of volumes.
Measuring scoop
Similar to spatulas, can be used for taking exact amounts of material.
Pipette
Pasteur pipettes are commonly used due as they're simple to use, cheap and reliable.
Graduated plastic pipettes to be used for titrations.
Transfer pipettes are also made of PE.
Pipette tips are made of PE.
Pipette jar
Similar to a graduated cylinder, though opaque and no markings, it is commonly used as a holster for various pipettes, either for storage or washing.
Pouring boat
Used for handling solids and, as their name suggests, add them to a flask or bottle.
Reagent bottle
Plastic storage bottles, made of PE or polystyrene are commonly used for storing dry reagents, such as salts, granules, some organic solvents. Hydrogen peroxide and volatile flammable solvents that do not attack plastic, such as alcohols, are generally stored in PE bottles.
Syringes
Graduated plastic tubes fitted with a plastic piston, commonly used for transferring liquids. Come together with needles.
Test tubes
PE or PTFE tubes tend to be used for chemistry involving salts and reactions where no heat is needed/generated.
Types:
- Falcon tube
- PET preforms
Trays
Used for storing, handling and carrying lab equipment.
Tubings
Plastic tubes are used for cooling, PE and PTFE tubes are used for transferring gasses.
Cannula is one such type of tube.
Tweezers
Plastic tweezers can be used for handling items that are corrosive to metals, or when handling electric components.
Volumetric flasks
Used for measuring fixed amounts of liquid.
Wash bottle
Wash bottles are plastic bottles with a tube protruding the cap, which generally has a small diameter detachable head. Commonly used for washings (hence the name).
A less known type is the refillable wash bottle.
Weighing dish
Come in various shapes, like square or hexagonal, are commonly used for weighing solids or for air drying wet solids. Can be made of PE or polystyrene.
Advanced plasticware
Agar plate
Used in microbiology for cultivating microorganisms.
Aspirator vacuum pump
Known as Venturi pumps, are commonly used for vacuum filtration.
Burette butterfly clamps
Used for holding burettes.
Drying rack
Used for drying lab items.
Eppendorf vials
Commonly used in biology, in centrifugation.
Funnel supports
Used for holding separatory funnels. Come in two types, full ring or "C" shaped.
Joint sleeves
PTFE joint sleeves are used in ground glass joints due to their chemical inertness.
Hydrometer
Although glass hydrometers are common, plastic hydrometers are also commonly encountered, as they do not break if struck, which would be catastrophic for the device.
Hose stopcock
Similar to gas/water valves, this type of stopcock is used in various plastic tubing as a simple fluid valve. Also comes in metal and glass form.
Keck clips
Also known as plastic joint clips, kecks are used for holding various glassware with ground glass joints. Manufacturers tend to give a distinct color for each keck clip size, though the colors may differ from producers. Also comes in metal form.
Spray bottle
Useful when spraying liquids.
Stir bar
Consists of a small magnetic material coated in PTFE, which moves when exposed to an external magnetic field.
Stir bar retriever
Similar to the stir bar, it consists of a stick made of PTFE, with one end containing a magnet.
Syringe filter
Used for filtering small amounts of liquid.
The most common type is the "sliced lemon" model.
Test tube racks
Used for holding many test tubes.
Microtiter plates are used for holding small vials.
Tubing connectors
Used when connecting multiple tubes. Have various shapes, like T, Y, L, +, etc.
Other
Balance brush
Used to clean the lab balance.
Bottle carrier
Useful for carrying multiple reagent bottles.
Bottle spigot
Useful when pouring liquids from a large tank, like distilled water.
Face shield
Not used in chemical synthesis, but rather as protective equipment.
Flow indicator
Used in water cooling tubing, to show if the water is flowing. Comes in two models, paddle wheel and ball.
Pour spout
Used when pouring from drums or jugs. They look like this.
Respirator
Used as PPE.