Difference between revisions of "Ammonium dinitramide"

From Sciencemadness Wiki
Jump to: navigation, search
(Created page with "{{Chembox | Name = Ammonium dinitramide | Reference = | IUPACName = Ammonium dinitramide | PIN = | SystematicName = | OtherNames = ADN<br>Dinitramide ammonium salt <!-- Images...")
 
 
(One intermediate revision by the same user not shown)
Line 61: Line 61:
 
| MeltingPt_ref =  
 
| MeltingPt_ref =  
 
| MeltingPt_notes =  
 
| MeltingPt_notes =  
 +
| Odor = Odorless
 
| pKa =  
 
| pKa =  
 
| pKb =  
 
| pKb =  
| Solubility =  
+
| Solubility = 140 g/100 ml (-15 °C)<br>168.1 g/100 ml (-10 °C)<br>225.7 g/100 ml (0 °C)<br>356.6 g/100 ml (20 °C)<ref>https://pubs.acs.org/doi/abs/10.1021/je0600698</ref>
 
| SolubleOther = Soluble in [[acetone]], [[butanol]]
 
| SolubleOther = Soluble in [[acetone]], [[butanol]]
 
| Solvent =  
 
| Solvent =  
Line 124: Line 125:
  
 
==Availability==
 
==Availability==
ADN is difficult to get hold off.
+
As this compound is still researched, ADN is not currently in any supplier's stock, not even Sigma-Aldrich/Merck don't have it.
 +
 
 +
[http://www.eurenco.com/content/explosives/defence-security/oxidizers-energetic-polymers/adn/ One company] allegedly sells crystalline and prilled ADN.
  
 
==Preparation==
 
==Preparation==
Ammonium dinitramide can be synthesized from [[ammonium nitrate]], anhydrous [[nitric acid]], and fuming [[sulfuric acid]] containing 20% free [[sulfur trioxide]]. A base other than ammonia must be added before the acid dinitramide decomposes. The final product is obtained by fractional crystallization.
+
A route to obtain ammonium dinitramide involves potassium sulfamate, a salt of [[sulfamic acid]]. The potassium sulfamate salt is obtained by neutralizing sulfamic acid with potassium hydroxide or carbonate, then the solution is dried and solid potassium sulfamate is collected. In a reaction flask, a nitrating mixture consisting of 106 ml fuming nitric acid and 26.4 ml conc. sulfuric acid are added, and the flask is cooled to -40 °C. The stirring is turned on, and the dry potassium sulfamate (40 g) is slowly added in 4 g portions for 10 min. As the reaction progresses, the viscosity of the mixture increases, as the potassium sulfate precipitates. Stirring continues for 30 more minutes. The resulting mixture is poured in crushed ice, and neutralized with potassium hydroxide, under cooling. The product is filtrate and extracted using acetone. The yield of this process is almost 50%. The ammonium dinitramide is obtained from the potassium salt via metathesis with a soluble ammonium salt.<ref>https://patents.google.com/patent/US5976483</ref><ref>https://www.researchgate.net/publication/288230194_Safety_of_Ammonium_Dinitramide_Synthesis_vs_Size_of_a_Commercial_Production_Scale</ref>
  
 
A route to this compounds involves dissolving [[nitramide]] in dry and cold [[acetonitrile]] (-10 °C), followed by the addition of [[nitronium tetrafluoroborate]]. The mixture is stirred for 10 min, after which an etheric solution of [[ammonia]] in [[isopropanol]] is added to the acetonitrile solution. The solvent is removed and the ADN is recrystallized from [[butanol]].<ref>[http://pubs.acs.org/doi/10.1021/ja9709278 Bottaro, Jeffrey C.; Penwell, Paul E.; Schmitt, Robert J.; Journal of the American Chemical Society; vol. 119; nb. 40; (1997); p. 9405 - 9410]</ref>
 
A route to this compounds involves dissolving [[nitramide]] in dry and cold [[acetonitrile]] (-10 °C), followed by the addition of [[nitronium tetrafluoroborate]]. The mixture is stirred for 10 min, after which an etheric solution of [[ammonia]] in [[isopropanol]] is added to the acetonitrile solution. The solvent is removed and the ADN is recrystallized from [[butanol]].<ref>[http://pubs.acs.org/doi/10.1021/ja9709278 Bottaro, Jeffrey C.; Penwell, Paul E.; Schmitt, Robert J.; Journal of the American Chemical Society; vol. 119; nb. 40; (1997); p. 9405 - 9410]</ref>
  
 
The reaction of [[dinitrogen pentoxide]] with [[ammonia]] in [[dichloromethane]] -78 °C,  will give ammonium dinitramide. To obtain the compound, the reaction product is warmed to room temperature, the CH<sub>2</sub>Cl<sub>2</sub> is removed then the compound is extracted with [[acetone]]. Further purification can be achieved by recrystallizing the compound from [[butanol]]. Total yield is 15%. If the reaction takes place at higher temperatures, the yield will be lower.<ref>[http://pubs.acs.org/doi/10.1021/ja9709278 Bottaro, Jeffrey C.; Penwell, Paul E.; Schmitt, Robert J.; Journal of the American Chemical Society; vol. 119; nb. 40; (1997); p. 9405 - 9410]</ref>
 
The reaction of [[dinitrogen pentoxide]] with [[ammonia]] in [[dichloromethane]] -78 °C,  will give ammonium dinitramide. To obtain the compound, the reaction product is warmed to room temperature, the CH<sub>2</sub>Cl<sub>2</sub> is removed then the compound is extracted with [[acetone]]. Further purification can be achieved by recrystallizing the compound from [[butanol]]. Total yield is 15%. If the reaction takes place at higher temperatures, the yield will be lower.<ref>[http://pubs.acs.org/doi/10.1021/ja9709278 Bottaro, Jeffrey C.; Penwell, Paul E.; Schmitt, Robert J.; Journal of the American Chemical Society; vol. 119; nb. 40; (1997); p. 9405 - 9410]</ref>
 +
 +
A synthesis without a source is given on Wikipedia, but due to the lack of references it's unclear if it actually works: Ammonium dinitramide can be synthesized from [[ammonium nitrate]], anhydrous [[nitric acid]], and fuming [[sulfuric acid]] containing 20% free [[sulfur trioxide]]. A base other than ammonia must be added before the acid dinitramide decomposes. The final product is obtained by fractional crystallization.
  
 
==Projects==
 
==Projects==
*Rocket fuel
+
*Rocket fuel and propellant
 +
*Oxidizer
  
 
==Handling==
 
==Handling==
Line 141: Line 147:
  
 
===Storage===
 
===Storage===
In closed bottles, away from anything combustible.
+
Ammonium dinitramide should be kept in closed plastic bottles, away from acids and anything combustible.
  
 
===Disposal===
 
===Disposal===

Latest revision as of 16:56, 19 November 2018

Ammonium dinitramide
Names
IUPAC name
Ammonium dinitramide
Other names
ADN
Dinitramide ammonium salt
Properties
H4N4O4
Molar mass 124.06 g/mol
Appearance White solid
Odor Odorless
Density 1.81 g/cm3
Melting point 93 °C (199 °F; 366 K)
Boiling point 160 °C (320 °F; 433 K) (decomposes)
140 g/100 ml (-15 °C)
168.1 g/100 ml (-10 °C)
225.7 g/100 ml (0 °C)
356.6 g/100 ml (20 °C)[1]
Solubility Soluble in acetone, butanol
Vapor pressure ~0 mmHg
Thermochemistry
14,398.1 kJ/mol
Hazards
Safety data sheet None
Related compounds
Related compounds
Ammonium nitrate
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
Infobox references

Ammonium dinitramide (ADN) is the ammonium salt of dinitraminic acid, having the chemical formula NH4N(NO2)2. It is a much more powerful oxidizer than ammonium nitrate.

Properties

Chemical

Ammonium dinitramide decomposes when heated to give off water vapors, nitrogen and oxygen:

NH4N(NO2)2 → 2 N2 + 2 H2O + O2

Small amounts of nitrous oxide and nitric oxide are also produced.

Physical

Ammonium dinitramide is a colorless crystalline solid.

Explosive

Ammonium dinitramide may explode when exposed to strong shock or very high temperatures, but overall it is stable. Detonation velocity is around 7,000 m/s.[2]

Availability

As this compound is still researched, ADN is not currently in any supplier's stock, not even Sigma-Aldrich/Merck don't have it.

One company allegedly sells crystalline and prilled ADN.

Preparation

A route to obtain ammonium dinitramide involves potassium sulfamate, a salt of sulfamic acid. The potassium sulfamate salt is obtained by neutralizing sulfamic acid with potassium hydroxide or carbonate, then the solution is dried and solid potassium sulfamate is collected. In a reaction flask, a nitrating mixture consisting of 106 ml fuming nitric acid and 26.4 ml conc. sulfuric acid are added, and the flask is cooled to -40 °C. The stirring is turned on, and the dry potassium sulfamate (40 g) is slowly added in 4 g portions for 10 min. As the reaction progresses, the viscosity of the mixture increases, as the potassium sulfate precipitates. Stirring continues for 30 more minutes. The resulting mixture is poured in crushed ice, and neutralized with potassium hydroxide, under cooling. The product is filtrate and extracted using acetone. The yield of this process is almost 50%. The ammonium dinitramide is obtained from the potassium salt via metathesis with a soluble ammonium salt.[3][4]

A route to this compounds involves dissolving nitramide in dry and cold acetonitrile (-10 °C), followed by the addition of nitronium tetrafluoroborate. The mixture is stirred for 10 min, after which an etheric solution of ammonia in isopropanol is added to the acetonitrile solution. The solvent is removed and the ADN is recrystallized from butanol.[5]

The reaction of dinitrogen pentoxide with ammonia in dichloromethane -78 °C, will give ammonium dinitramide. To obtain the compound, the reaction product is warmed to room temperature, the CH2Cl2 is removed then the compound is extracted with acetone. Further purification can be achieved by recrystallizing the compound from butanol. Total yield is 15%. If the reaction takes place at higher temperatures, the yield will be lower.[6]

A synthesis without a source is given on Wikipedia, but due to the lack of references it's unclear if it actually works: Ammonium dinitramide can be synthesized from ammonium nitrate, anhydrous nitric acid, and fuming sulfuric acid containing 20% free sulfur trioxide. A base other than ammonia must be added before the acid dinitramide decomposes. The final product is obtained by fractional crystallization.

Projects

  • Rocket fuel and propellant
  • Oxidizer

Handling

Safety

Ammonium dinitramide is a powerful oxidizer and may explode under strong heating or shock. Handle it with care.

Storage

Ammonium dinitramide should be kept in closed plastic bottles, away from acids and anything combustible.

Disposal

Carefully heating the compound will cause it to decompose. For safety, you can mix it with a non-flammable material, like gypsum before heating.

References

  1. https://pubs.acs.org/doi/abs/10.1021/je0600698
  2. http://www.eurenco.com/content/explosives/defence-security/oxidizers-energetic-polymers/adn/
  3. https://patents.google.com/patent/US5976483
  4. https://www.researchgate.net/publication/288230194_Safety_of_Ammonium_Dinitramide_Synthesis_vs_Size_of_a_Commercial_Production_Scale
  5. Bottaro, Jeffrey C.; Penwell, Paul E.; Schmitt, Robert J.; Journal of the American Chemical Society; vol. 119; nb. 40; (1997); p. 9405 - 9410
  6. Bottaro, Jeffrey C.; Penwell, Paul E.; Schmitt, Robert J.; Journal of the American Chemical Society; vol. 119; nb. 40; (1997); p. 9405 - 9410

Relevant Sciencemadness threads