Sciencemadness Discussion Board
Not logged in [Login ]
Go To Bottom

Printable Version  
Author: Subject: Preparing Ammonium Nitrate from Common Fertilizers without Nitric Acid
KoiosPhoebus
Hazard to Self
**




Posts: 51
Registered: 23-1-2023
Member Is Offline


[*] posted on 5-2-2023 at 23:58
Preparing Ammonium Nitrate from Common Fertilizers without Nitric Acid


Hi everyone! This is my second post on here, so apologies in advance if this in the wrong forum. I have some background working with chemicals used in agriculture/horticulture so that's what I'll be posting about.

Outside of the US, ammonium nitrate (NH4NO3) is typically restricted and pretty hard to get hold of. Depending on where you are, this might mean "you can recrystallise it from a complex fertilizer like ammonium sulphate nitrate" or "it's mixed with three different fertilizers, some of which are somewhat soluble in ethanol lol good luck". However, it can be prepared from other fertilizers; the most common combination I've heard of is ammonium sulphate and calcium nitrate. The resulting calcium sulphate is minimally soluble in water and precipitates out, leaving mostly ammonium nitrate in solution.

(NH4)2SO4 + Ca(NO3)2 → CaSO4 ↓ + 2 NH4NO3

This is a very viable way to make ammonium nitrate. Unfortunately, many commercial ammonium sulphate fertilizers are fairly impure, with the most common impurity typically being another metal sulphate such as iron sulphate. This makes purification difficult as the products will include various metal nitrates which are commonly soluble in alcohols the same way ammonium nitrate is.

Instead, I've had success using:
  • Diammonium phosphate, (NH4)2HPO4
  • Calcium nitrate, Ca(NO3)2

Diammonium phosphate (DAP) is both a very common fertilizer, as well as a commonly-used yeast nutrient source in brewing. The latter use means that it's often widely available in food-grade form, which is usually much purer than the fertilizer grade. Get the food-grade from your local brewing supplies store if you can; otherwise you might need to recrystallise the DAP to remove impurities.

Calcium nitrate can be found either by itself, or as the double salt calcium-ammonium nitrate (5 Ca(NO3)2.NH4NO3.10 H2O). This is commonly found as a soluble calcium fertilizer or in hydroponic fertilizers; because of this, it's typically reasonably pure as long as stored properly.

The reaction proceeds as:
(NH4)2HPO4 + Ca(NO3)2 → CaHPO4 ↓ + 2 NH4NO3

Or in the case of the double salt:
5 (NH4)2HPO4 + 5 Ca(NO3)2.NH4NO3.10 H2O → 5 CaHPO4 ↓ + 11 NH4NO3 + 10 H2O

The side-product, dicalcium phosphate (DCP), is very insoluble in water, with a solubility of 0.018 g/100 mL as opposed to calcium sulfate's 0.26 g/100 mL. My procedure is as follows:

  1. Dissolve the calcium nitrate into water. Filter off insolubles if need be.

  2. Add a stir bar, or be prepared to stir the mixture regularly.

  3. Add diammonium phosphate dry to the solution of calcium nitrate and stir. DAP produces an alkaline solution when dissolved; if you dissolve it into solution first and don't add it rapidly enough, the solution will lose ammonia and become a mix of DAP and monoammonium phosphate. This messes up the stoichiometry and results in monocalcium phosphate when reacted, which is a lot more soluble than dicalcium phosphate.

  4. After stirring becomes difficult, leave the mixture alone for a few hours to age and for everything to react.

  5. Give it one last stir, then start filtering out the dicalcium phosphate. Typically, you'll want to add more water to get as much ammonium nitrate out as possible as some will be trapped in the DCP. I usually add about as much water to the dicalcium phosphate mix as I used in the first step.
    One way to test if you've washed out as much ammonium nitrate as possible is to test the pH of the water coming out of the filter; if it's lower than the water you're pouring in, that probably means that some ammonium nitrate is still coming through.

  6. Evaporate off as much water as possible. Don't worry if you don't remove all of it, the next few steps will produce much drier crystals.

  7. Break up the chunks of evaporated ammonium nitrate into a reasonably fine powder. Then, wash them a few times with acetone to remove excess calcium nitrate. Calcium nitrate has a high solubility in acetone (33 g/100 g) but ammonium nitrate is minimally soluble in acetone (0.15g/100g).

  8. Leave the washed crystals to dry. Once the crystals seem mostly dry, weigh them.

  9. Measure out enough ethanol to dissolve all the crystals if they were pure ammonium nitrate and the ethanol is near-boiling. I typically use a rate of about 100g ethanol per 7g crystals based on this data (https://en.crystalls.info/Solubility_curve), but I've definitely heard of people getting more ammonium nitrate into boiling ethanol.

  10. Once you dissolve the crystals into the ethanol, there may be some precipitate formed. This precipitate is usually various ammonium phosphates and trace calcium phosphates, which can be filtered off.

  11. Leave the hot solution of ammonium nitrate to cool and form crystals; place it in the freezer if possible to maximise crystal recovery.

  12. Filter out the crystals. Congrats, you now have your ammonium nitrate!

I've also heard from friends who had success adding the DAP in batches; i.e. adding half the DAP, filtering, then adding the other half.

Questions I've been asked about this before

Can I use other ammonium phosphates?
You can hypothetically use triammonium phosphate ((NH4)3PO4), which would precipitate hydroxyapatite or tricalcium phosphate instead of dicalcium phosphate. The reaction should be similar; however my impression is that apatite and tricalcium phosphate have greater solubility in acidic conditions than dicalcium phosphate. As ammonium nitrate is a slightly acidic salt, this likely means greater contamination and hence reduced yield.

(I'd be surprised if you could get hold of triammonium phosphate and not diammonium phosphate though)

Monoammonium phosphate (NH4H2PO4) should be avoided as it produces monocalcium phosphate (CaH2PO4) instead of dicalcium phosphate. MCP is 100x more soluble than dicalcium phosphate according to standard accepted solubility figures; some literature even argues that MCP is highly water-soluble and the standard solubility estimate of 18g/L is inaccurate due to the precipitation of DCP from MCP decomposition in solution.

Can I use other nitrates?
Any metal nitrate whose hydrogen phosphate (HPO42-) salt is minimally soluble in water is fine as long as it doesn't co-crystallise with ammonium. This rules out magnesium nitrate as magnesium co-crystallises with ammonium and phosphates to give struvite (MgNH4PO4), messing up the stoichiometry. I'm not sure if there's many other commonly available nitrates which fit the above criteria.

You could use sodium and potassium nitrate and then try to remove the resulting sodium/potassium hydrogen phosphate through the ethanol recrystallisation step. I haven't done it this way myself; I typically try to minimize the amount of precipitates to be removed through ethanol recrystallisation due to the fact that ammonium nitrate isn't very soluble in ethanol. Hence, it's not always easy to tell if a bunch of precipitate is from impurities, or if it's leftover ammonium nitrate which hasn't dissolved into the ethanol.

Can I use denatured acetone/ethanol?
It depends on what they've been denatured with. Denatonium benzoate is fine, but sometimes manufacturers add weird solvents which could mess things up. In particular, check if the acetone has been denatured with anything that would dissolve ammonium nitrate (methanol comes to mind) and check if the ethanol has been denatured with anything that would dissolve ammonium phosphates.

I'd also recommend trying to get solvents which are as close to anhydrous as possible. Ammonium nitrate and ammonium phosphate dissolve readily in water, so e.g. if you use a 90% acetone solution to wash your product, you might lose a bunch of ammonium nitrate when washing out calcium nitrate. Or if you use 90% ethanol, you might introduce a greater amount of ammonium phosphate into the final product.

Can I use methanol instead of ethanol?
I'd say...probably? Never done it before myself. Methanol dissolves ammonium phosphates at slightly higher rates than ethanol but it's not a huge difference. On the other hand, ammonium nitrate is a lot more soluble in methanol than it is in ethanol, so you can work with smaller amounts of solvent. Be sure to work in an environment where you won't come into contact with fumes; methanol is quite toxic if it accumulates in your body.


I hope someone finds this helpful on their home scientist journey!
View user's profile View All Posts By User
Texium
Administrator
Thread Moved
6-2-2023 at 06:37
MadHatter
International Hazard
*****




Posts: 1333
Registered: 9-7-2004
Location: Maine
Member Is Offline

Mood: Enjoying retirement

[*] posted on 6-2-2023 at 13:02
CAN


This is a link to my post on using CAN(Calcium Ammonium Nitrate). It really
depends on the purity you need. For me it's energetics for propellants so purity
isn't that important.

http://www.sciencemadness.org/talk/viewthread.php?tid=154741...




From opening of NCIS New Orleans - It goes a BOOM ! BOOM ! BOOM ! MUHAHAHAHAHAHAHA !
View user's profile View All Posts By User
KoiosPhoebus
Hazard to Self
**




Posts: 51
Registered: 23-1-2023
Member Is Offline


[*] posted on 6-2-2023 at 14:21


Quote: Originally posted by MadHatter  
This is a link to my post on using CAN(Calcium Ammonium Nitrate). It really
depends on the purity you need. For me it's energetics for propellants so purity
isn't that important.

http://www.sciencemadness.org/talk/viewthread.php?tid=154741...


Great addition, thanks. I've used both before and I typically get better yields + purer crystals with the DAP/CAN method as compared to the AS/CAN method.

FYI, the paraffin coating is partly for slower release in soil but more importantly for anti-caking purposes. If you ever find soluble CAN (usually declared as hydroponics grade, or "soluble calcium"), you'll notice it's quite slimy/sticky to the touch. The coating can probably be removed with a non-polar organic solvent like toluene or xylene, but honestly dissolution in water + filtration is probably better anyway - gets out other particles which may have ended up in the mix.
View user's profile View All Posts By User
chloric1
International Hazard
*****




Posts: 1116
Registered: 8-10-2003
Location: GroupVII of the periodic table
Member Is Offline

Mood: Stoichiometrically Balanced

[*] posted on 1-9-2024 at 14:55


Not tried the DAP method yet but am in the middle of doing the AS/CN method. That’s right my fertilizer is ammonia free calcium nitrate and dissolved to form a clear solution.

Anyways I just want to add that I have precipitated dibasic calcium phosphate using dibasic sodium phosphate and calcium chloride. If you precipitated dibasic calcium phosphate at 70 Celsius or above the phosphate comes down anhydrous. Don’t remember hydrateformed




Fellow molecular manipulator
View user's profile View All Posts By User
yobbo II
National Hazard
****




Posts: 747
Registered: 28-3-2016
Member Is Offline

Mood: No Mood

[*] posted on 2-9-2024 at 06:52




CAN in the UK is a mixture of ammonium nitrate and calcium carbonate (dolomite, chalk etc).
It is not the double salt that you have.
Where are you.

Yob
View user's profile View All Posts By User
chloric1
International Hazard
*****




Posts: 1116
Registered: 8-10-2003
Location: GroupVII of the periodic table
Member Is Offline

Mood: Stoichiometrically Balanced

[*] posted on 3-9-2024 at 02:24


Quote: Originally posted by yobbo II  


CAN in the UK is a mixture of ammonium nitrate and calcium carbonate (dolomite, chalk etc).
It is not the double salt that you have.
Where are you.

Yob


Well I guess at least you have the ammonium nitrate. In the US you can get it from certain chemical suppliers but you need to submit a copy of your government ID. I’m not trying to put that out there. It’s easy enough to make therefore not too many need to know I have any.

I truly hate what’s going on in the UK and in the EU at large for that matter. Not having access to sulfuric acid and the general regulations on “toxic chemicals”. It’s nonsense to ban chemicals. Some may be harmful to humans,animals and environment but hey they ALL have “natural” and “earthbound”roots per se. It’s just the government flexing their muscles with their power play. Meanwhile, dedicated alchemists are bringing back synthetic processes of long ago to obtain useful reagents. :P




Fellow molecular manipulator
View user's profile View All Posts By User
Precipitates
Hazard to Self
**




Posts: 95
Registered: 4-12-2023
Location: SE Asia
Member Is Offline

Mood: Acid hungry

[*] posted on 3-9-2024 at 07:31


Quote: Originally posted by chloric1  
Meanwhile, dedicated alchemists are bringing back synthetic processes of long ago to obtain useful reagents. :P


The problem is that the act of producing these reagents, and possession of them, is still illegal. Sure you can make them, but may get in trouble if the police come knocking.

An additional downside relates to projects involving such chemicals - an alchemist may spend so long procuring the reactants* (following known procedures), that he has less time to perform lesser known, perhaps more interesting experiments.

*Not even considering the additional safety risks.

I wonder if farms in the UK still have the pure AN. I remember climbing over ton bags of the stuff when I did farm work years ago.
View user's profile View All Posts By User
yobbo II
National Hazard
****




Posts: 747
Registered: 28-3-2016
Member Is Offline

Mood: No Mood

[*] posted on 3-9-2024 at 13:25



Was the ammonium nitrate that you climbed over really pure?
That 34.5% Nitrogen, or was it 27% or 27.5% N (the stuff with the chalk in it).

One of the reasons that chalk was added to ammonium nitrate was not really to stop people making bombs but rather for safety.
It can explode if involved in a fire. Or if diesel fuel (or any other fuel) gets mixed with it is a definite explosion risk.
Look what happened in Beirut and that was the 27% stuff.

I believe you can purchase potassium nitrate (pure) with a licence for market gardening in UK.

Yob
View user's profile View All Posts By User
Precipitates
Hazard to Self
**




Posts: 95
Registered: 4-12-2023
Location: SE Asia
Member Is Offline

Mood: Acid hungry

[*] posted on 3-9-2024 at 17:36


I believe it was 34.5% nitrogen.

I know we were warned not to stack the bags more than 2 high due to the explosion hazard if one of them fell.

Yeah, gone are the days when you could just pick up a bag of nitrate of soda at the local gardening store though (may have been very impure, but still good fun when mixed with sugar, and easily recrystallised and converted to other nitrates).
View user's profile View All Posts By User
dettoo456
Hazard to Others
***




Posts: 229
Registered: 12-9-2021
Member Is Offline


[*] posted on 5-9-2024 at 15:47


34-0-0 (Ammonium nitrate) can still be bought in the US and UK but requires a license in both countries.

The AS/CN method is very viable (at least in the US) if you have the time and space, though the cost will be much more than the pure AN, even with the costs of licensing included. AN in 50lb bags are around $25-30.

All that’s needed to make it though are 2 30gal poly drums, a paint or concrete mixer drill, and a peristaltic pump. Cost will average around $2 per lb.
View user's profile View All Posts By User
chloric1
International Hazard
*****




Posts: 1116
Registered: 8-10-2003
Location: GroupVII of the periodic table
Member Is Offline

Mood: Stoichiometrically Balanced

[*] posted on 5-9-2024 at 16:01


I started 3 days ago by mixing concentrated calcium nitrate with ammonium sulfate in stoichimetric quantities. These were not fertilizer grade per se but more or less at least technical if not practical grade. I struggled to finally get SOME needle shaped ammonium nitrate crystals but I have quite far to go as I am nowhere near my theoretical yield of 160 grams. It has been a challenge. I boil the filtrate and every 50-75ml I have to filter out dissolved calcium sulfate. Plus, to my dismay I discovered a significant portion of my desired ammonium nitrate was still trapped in the calcium sulfate. In my frustration I put the calcium sulfate back into a 1 liter beaker and submerged it with fresh distilled and left it there for the night.

It appears the retrograde solubility of calcium sulfate is more pronounced when coming out of ammonium salt solutions. By the time I got crystals I’m sure the amount of remaining calcium sulfate is trace but a hot methanol work up might be needed if I am to make barium nitrate with this salt.

I might repeat this experiment/synthesis and use more dilute solutions. I’d rather boil off several hundred ml of water than go through this again. Plus suction filtration would improve as the calcium sulfate would be more like runny cool whip than spackling.




[Edited on 9/6/2024 by chloric1]

IMG_7345.jpeg - 2.2MB




Fellow molecular manipulator
View user's profile View All Posts By User

  Go To Top