Difference between revisions of "Mercury(II) fulminate"

From Sciencemadness Wiki
Jump to: navigation, search
(Preparation)
 
Line 91: Line 91:
 
   }}
 
   }}
 
| Section6 = {{Chembox Hazards
 
| Section6 = {{Chembox Hazards
| AutoignitionPt = 170 °C
+
| AutoignitionPt = 170 °C (338 °F; 443 K)
 
| ExploLimits =  
 
| ExploLimits =  
 
| ExternalMSDS = [http://www.t3db.ca/system/msds/attachments/000/000/770/original/T3D0340.pdf?1413587571 CPCB]
 
| ExternalMSDS = [http://www.t3db.ca/system/msds/attachments/000/000/770/original/T3D0340.pdf?1413587571 CPCB]
Line 135: Line 135:
 
==Projects==
 
==Projects==
 
*Make blasting caps
 
*Make blasting caps
 +
*Compound collecting
  
 
==Handling==
 
==Handling==
Line 148: Line 149:
 
Addition of an acid, such as hydrochloric acid will convert it into [[mercury(II) chloride]], which should be converted to an insoluble form, such as [[mercury sulfide]] and then taken to a hazardous chemical center for disposal.
 
Addition of an acid, such as hydrochloric acid will convert it into [[mercury(II) chloride]], which should be converted to an insoluble form, such as [[mercury sulfide]] and then taken to a hazardous chemical center for disposal.
  
DO NOT POUR IT DOWN THE DRAIN!  
+
DO NOT POUR IT DOWN THE DRAIN! EVER!
  
 
==References==
 
==References==

Latest revision as of 19:27, 16 May 2023

Mercury(II) fulminate
Mercury(II) fulminate by Explosiopedia.jpg
Mercury(II) fulminate, grey and white samples
Names
IUPAC name
Mercury(II) fulminate
Other names
Fulminated mercury
Mercury fulminate
Properties
HgC2N2O2
Molar mass 284.624 g/mol
Appearance White-gray powder
Density 4.42 g/cm3
Melting point 160 °C (320 °F; 433 K) (explodes)
Boiling point 356.6 °C (673.9 °F; 629.8 K) (explodes)
0.0704 g/cm3 (at 20 °C)
0.1738 g/cm3 (at 49 °C)
Solubility Soluble in ammonia, ethanol
Solubility in chloroform 0.0066 g/cm3 (at 60 °C)
Solubility in diethyl ether 0.0028 g/cm3 (at 34 °C)
Hazards
Safety data sheet CPCB
Related compounds
Related compounds
Silver fulminate
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
Infobox references

Mercury(II) fulminate, or simply mercury fulminate is a primary explosive, sensitive to friction and shock, widely used in the past as trigger for other explosives in percussion and blasting caps, now largely replaced by other less toxic, more stable and less corrosive primers, such as lead styphnate or tetrazene derivatives. It has the chemical formula Hg(CNO)2.

Although some sources identify mercury fulminate as mercury cyanate, this is incorrect, as fulminates have a direct metal-carbon bond, while cyanates have an ionic bond between metal and the oxygen from the cyanate group.

Properties

Chemical

Mercury fulminate explodes when subjected to strong impact, friction, heat or electric arc, releasing a cloud of powdered mercury, nitrogen and carbon oxides.

Hg(CNO)2 → Hg + 2 CO + N2

Physical

Mercury(II) fulminate is a grayish solid powder, insoluble in water, and slightly more soluble in organic solvents and ammonia.

Explosive

Mercury(II) fulminate is a primary explosive material. It shows high sensitivity to shock, friction and heat, though unlike its silver counterpart, it's less sensitive and simply throwing a small bag of Hg(CNO)2 against a strong surface will not result in detonation. It has a detonation velocity of 4250 m/s.

Availability

Mercury(II) fulminate is not sold by any chemical supplier due to its hazards and has to be made.

Preparation

Mercury fulminate can be prepared prepared by dissolving elemental mercury in 70% nitric acid, followed by the addition of ethanol to the solution.[1] To make the resulting powder whiter, CuCl is used.[2]

Projects

  • Make blasting caps
  • Compound collecting

Handling

Safety

Mercury(II) fulminate is sensitive to shock, friction and heat. Its decomposition products contain carbon dioxide/monoxide, nitrogen and mercury vapors, with the latter being extremely toxic.

Mercury fulminate is very toxic and ingestion may cause death.

Storage

Mercury(II) fulminate should only be stored for very short periods of time and used as soon as possible.

Disposal

Addition of an acid, such as hydrochloric acid will convert it into mercury(II) chloride, which should be converted to an insoluble form, such as mercury sulfide and then taken to a hazardous chemical center for disposal.

DO NOT POUR IT DOWN THE DRAIN! EVER!

References

  1. https://www.youtube.com/watch?v=4Yep_aUbX_o
  2. https://vimeo.com/109323598

Relevant Sciencemadness threads