Potassium chlorate

From Sciencemadness Wiki
Revision as of 22:30, 14 June 2017 by Mabus (Talk | contribs)

Jump to: navigation, search
Potassium chlorate
KClO3 by No Tears Only Dreams Now.jpg
Crystals of potassium chlorate made from bleach.
IUPAC name
Potassium chlorate
Other names
Berthollet's salt
Potassium chlorate(V)
Molar mass 122.55 g/mol
Appearance White crystalline solid
Odor Odorless
Density 2.32 g/cm3
Melting point 356 °C (673 °F; 629 K)
Boiling point 400 °C (752 °F; 673 K) (decomposes)
3.13 g/100 ml (0 °C)
4.46 g/100 ml (10 °C)
8.15 g/100 ml (25 °C)
13.21 g/100 ml (40 °C)
53.51 g/100 ml (100 °C)
Solubility Reacts with sulfuric acid
Slightly soluble in liq. ammonia, glycerol
Almost insoluble in acetone, alcohols
Insoluble in alkanes, halocarbons
Solubility in glycerol 1 g/100 ml (20 °C)
Vapor pressure ~ 0 mmHg
142.97 J·mol-1·K-1
−391.2 kJ/mol
Safety data sheet Sigma-Aldrich
Flash point Non-flammable
Lethal dose or concentration (LD, LC):
1870 mg/kg (oral, rat)
Related compounds
Related compounds
Potassium chloride
Potassium chlorite
Potassium perchlorate
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
Infobox references

Potassium chlorate, also known as Berthollet's salt, is the inorganic chemical compound with the formula KClO3, and is the potassium salt of chloric acid. It is a strong oxidizing agent.



Potassium chlorate is is an extremely powerful oxidizer.

If sulfuric acid is added to potassium chlorate, chloric acid is formed:

2 KClO3 + H2SO4 → 2 HClO3 + K2SO4

The chloric acid decomposes immediately to perchloric acid and chlorine dioxide. The latter will spontaneously ignite any combustible material (sugar, paper, dust). As a fun project, various sweets, often gummy bears(jelly babies) are dropped into molten potassium chlorate to produce intense pink flames and, if in a narrow container, a screaming sound.

Potassium chlorate will decompose if heated in the presence of a catalyst, usually manganese dioxide, releasing oxygen and leaving potassium chloride behind. This effect can be taken advantage of in order to quickly add oxygen to a system.

2 KClO3(s) → 3 O2(g) + 2 KCl(s)

If the heating occurs without a catalyst, potassium perchlorate will be formed (although in practice, this is difficult to do):

4 KClO3 → 3 KClO4 + KCl


Potassium chlorate is a transparent to white salt that precipitates as well-formed, lustrous crystals which have a silky texture and are poorly soluble in water and glycerol. Similar to potassium nitrate, it is not hygroscopic, making it very useful as an oxidizer for pyrotechnics. Unlike hypochlorites, it has no odour, so a 'bleachy' smell is an indication of impure samples.


Potassium chlorate was available as a fruit growth fertilizer as well as weed killer, but in recent years it has become restricted, due to its powerful oxidizing properties, as it was used in many bombings.

It can also be found in safety match heads, where it is mixed with sulfur and glue, though one would need a large amount of safety matches. It's much cheaper to make it.


Potassium chlorate can be prepared by boiling bleach (sodium hypochlorite solution) or calcium hypochlorite, for about 10-20 minutes, which causes it to disproportionate into sodium chlorate and sodium chloride. Since sodium chloride is less soluble than the chlorate, it will crystallize, while the chlorate will remain in solution. Crystallization begins at about the same time that the bleach reaches one third of the original volume. This chlorate solution is then added to equivalent solution of saturated potassium chloride solution, to precipitate the potassium chlorate. Carefully cooling the solution to about 0 degrees C will yield more product. The flat, shiny crystals should then be filtered out and washed multiple times with ice cold water.[1]

Potassium chlorate can also be produced much more efficiently via electrolysis of a saturated solution of potassium chloride with inert electrodes, procedure known as alkali chlorate cell. Detailed procedure of the process can be found on both the Sciencemadness board as well as in other places online.

Recrystallization of KClO3 is easy as it is very soluble in hot water but sparingly soluble in freezing water




When mixed with combustible materials, even those normally slightly flammable (such as dust and lint), it will burn vigorously in combination and the fires are extremely hard to put out, as the chlorate provides the oxygen for the fire. Sulfur and red phosphorus, should be avoided in pyrotechnic compositions containing potassium chlorate, as well as any acidic salts, as these mixtures are shock and friction sensitive and prone to spontaneous deflagration (in the safety head matches, such mixture is stabilized with glue). Molten potassium chlorate will ignite any combustible material and can burn even through standard lab safety clothing.


Potassium chlorate should be stored in closed containers and away from any organic sources, as well as strong acidic vapors. Since it is not hygroscopic, it is not necessary to keep it air tight.


Potassium chlorate can be neutralized with a reducing agent, such as sodium metabisulfite, sodium bisulfite, sodium sulfite or a mixture of sulfuric acid and ferrous ammonium sulfate. The resulting products should be neutralized with a base and safely poured down the drain.[2]


  1. http://www.youtube.com/watch?v=JtxQT7aVDeg
  2. http://www.oocities.org/capecanaveral/campus/5361/chlorate/destroy.html

Relevant Sciencemadness threads