| IUPAC name
| Other names
Muriate of potash
|Molar mass||74.5513 g/mol|
|Melting point||770 °C (1,420 °F; 1,040 K)|
|Boiling point||1,420 °C (2,590 °F; 1,690 K)|
|35.5 g/100 ml (20 °C)|
|Solubility|| Soluble in alkali, glycerol|
Slightly soluble in alcohol
Insoluble in diethyl ether, hydrocarbons
Std enthalpy of
|Safety data sheet||Sigma-Aldrich|
|Lethal dose or concentration (LD, LC):|
LD50 (Median dose)
|2,600 mg/kg (rat, oral)|
| Lithium chloride|
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
Potassium chloride is a salt with the formula KCl. It is a white crystalline solid. It is edible, commonly used as a salt substitute, but it has a sharp, biting aftertaste (which is often described as metallic) that many people find unpleasant.
It can be found in nature as the mineral sylvite or sylvine. It is also found in the mineral sylvinite, where it can be found with sodium chloride (halite).
Potassium chloride is a white crystalline solid with a cubic structure. It has a molar mass of 74.55. KCl's solubility in water is 28 g/100 mL at 0 ˚C and 56.7 g/mL at 100 ˚C
Potassium chloride can be used as a source of chloride ions in reactions, although sodium chloride is more common. KCl is often used to make KClO3 (potassium chlorate) using electrolysis. The high solubility of KCl at low temperature compared to KClO3 makes it easy to separate the two compounds from a solution.
Although potassium is more electropositive than sodium, KCl can be reduced to the metal by reaction with metallic sodium at 850 °C because the more volatile potassium can be removed by distillation (see Le Chatelier's principle):
- KCl(l) + Na(l) ⇌ NaCl(l) + K(g)
Potassium chloride can be easily obtained in relatively pure form at the grocery store as a salt substitute for people with low-sodium diets. This source is mixed in with potassium bitartrate to improve taste. Some salt substitutes tend to have merely a KCl addition, as still have lots of sodium chloride. Recrystallization is required to further purify the compound.
However, salt substitute is deliberately overpriced by the companies that make it; it is many times cheaper to obtain potassium chloride through other means, often through larger industrial quantities, which are usually purer anyway. This includes buying potassium chloride as fertilizer, sometimes referred to as muriate of potash. In some hardware stores, sodium-free water purification tablets made of 99% or higher potassium chloride can be purchased, usually in bags weighing about 40 lbs. These are by far the most economic method of purchasing potassium chloride.
Potassium chloride can be prepared from potassium hydroxide and hydrochloric acid, but this method is uneconomical in the lab due to the fact that KCl is usually easier to get than potassium hydroxide. Potassium carbonate or potassium bicarbonate can also be added to hydrochloric acid, but this requires care to control carbon dioxide outgassing.
Potassium chloride can also be obtained from saline water (seawater), through fractional recrystallization, though you will need a very large amount of seawater to obtain any useful amount of KCl.
- Make potassium chlorate and potassium perchlorate
- Make colored flames
- Growing crystals
- Salt bridge in electrochemistry
No safety measures are needed with potassium chloride. It is non-toxic unless directly consumed in very large quantities.
Potassium chloride should be stored in closed plastic or glass bottles. No special storage is required.
Potassium chloride can be safely poured down the drain or dumped in trash.
- CRC Handbook of Chemistry and Physics 66th edition